纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	900 × 900 × 450 mm
tabletop thickness	20 mm
cross base arm width	80 mm
base floor contact length	700 mm
corner radius	30 mm
undertable floor clearance	430 mm
base vertical support height	430 mm
tabletop overhang from base	100 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

net product weight	55 kg
tabletop distributed static load	100 kg
tabletop point load capacity	30 kg
surface scratch resistance	6H
base anti-rust coating lifespan	5 years
floor protection load rating	200 kg per foot pad
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

tabletop	Polished natural black marble with bold white natural veining, high-gloss sealed finish
primary base structure	2mm thick black powder-coated carbon steel, welded cross frame
tabletop mounting plates	3mm thick galvanized steel brackets, secured with M8 hex bolts
base foot pads	10mm thick non-slip rubber pads, fitted to each base end
surface sealant	Penetrating stone sealer, stain-resistant transparent coating
base finish	Matte black electrostatic powder coating, scratch-resistant surface
connector hardware	Zinc-plated steel bolts and lock washers, corrosion-resistant
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support
Reference Finish / Color Count	Recommended 6top finishes and 3frame colors

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

stable support design	Cross-shaped metal base distributes tabletop weight evenly across four floor contact points
floor protection	Rubber foot pads at each base end prevent scratches on hard floors and rugs
surface cleaning	High-gloss sealed marble surface wipes clean with a damp cloth, resistant to common household spills
knock-down assembly	Tabletop attaches to base with included hex key, requiring 30 minutes of adult assembly
anti-tip design	Wide cross base creates a low center of gravity, preventing tipping when weight is placed on table edges
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

residential living room	Centered in front of a standard 3-seater sofa for drinks, reading materials and decor
hotel lounge areas	Used in guest seating zones for a high-end polished aesthetic
apartment open-plan living spaces	Compact 900mm square size fits small to medium living areas without overcrowding
office reception waiting areas	Low profile design provides a polished surface for guest refreshments and reading materials
show home staging	High-contrast black and white finish serves as a focal point in modern staged living rooms

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Furniture for domestic use, tables: strength, durability and safety requirements
EN 15185:2011	Furniture, test for resistance to abrasion of surfaces, applicable for coated metal base
EN 15186:2011	Furniture, test for resistance to staining of surfaces, applicable for sealed marble top

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for hardware and structural stability verification
GB 6566-2010	Limit of radionuclides in building materials, applicable for natural marble radiation safety testing
GB/T 4893.9-2013	Furniture surface test for impact resistance, applicable for marble tabletop durability validation

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable for hardware and structural stability verification；
2. GB 6566-2010：Limit of radionuclides in building materials, applicable for natural marble radiation safety testing；
3. GB/T 4893.9-2013：Furniture surface test for impact resistance, applicable for marble tabletop durability validation；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CT-BM90-CB

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CT-BM90-CB

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CT-BM90-CB打开导出工具

页面快速操作

发布采购询价

产品描述

The Modern Black Veined Marble Square Coffee Table with Cross Base, model CT-BM90-CB from an unbranded line, delivers a sleek, luxurious low-profile silhouette suited to contemporary interiors. Its square form measures 900 by 900 by 450 mm, with softly rounded 30 mm corners and a 20 mm thick polished natural black marble top marked by bold, naturally occurring white veining, finished with a high-gloss penetrating stone sealer for subtle sheen and stain protection. The tabletop overhangs 100 mm from the matte black cross base, whose 80 mm wide arms form a wide, stable footprint with 700 mm floor contact length per arm, creating 430 mm of open under-table clearance for unobstructed legroom and visual lightness. Built for long-term durability, the table’s cross frame is constructed from 2 mm thick carbon steel coated in scratch-resistant matte black electrostatic powder coating with a 5-year anti-rust coating lifespan. The tabletop affixes to the frame via 3 mm thick galvanized steel mounting brackets secured with corrosion-resistant zinc-plated M8 hex bolts and lock washers, while each base end is fitted with 10 mm thick non-slip rubber foot pads rated for 200 kg per pad to protect floor surfaces. The sealed marble surface carries a 6H scratch resistance rating, and supports a 100 kg distributed static load and 30 kg point load, with a 55 kg net product weight that balances sturdiness and manageable positioning. Practical design features support everyday use: the wide cross base creates a low center of gravity to resist tipping when weight rests on table edges, while the high-gloss sealed surface wipes clean easily with a damp cloth to resist common household spills. The unit ships knock-down, requiring adult assembly with the included hex key, and main joints support 5 controlled assembly cycles for repeated repositioning. This table fits seamlessly into residential living rooms positioned in front of standard three-seater sofas, compact open-plan apartment living spaces, hotel lounge seating zones, office reception waiting areas, and show home staging sets, where its high-contrast black and white finish acts as a refined focal point. For procurement, note that each set ships in 2 cartons with a total packaged gross weight of 90 kg, and plan for appropriate receiving and assembly resources to accommodate delivery and setup.

Modern Black Veined Marble Square Coffee Table with Cross Base Specifications

供应商与现货