纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1200 × 710 × 430 mm
Overall set nested footprint	1200 x 710 x 430 mm
Large (upper white) tabletop dimensions	1200 x 710 mm
Large table height	430 mm
Small (lower black) tabletop dimensions	660 x 510 mm
Small table height	400 mm
Tabletop thickness	25 mm
Leg diameter	12 mm
Leg spread (per table)	550 mm
Nested clearance under large table	360 mm
Overhang between nested tables	180 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total set net weight	22 kg
Large table static distributed load capacity	70 kg
Tabletop surface scratch resistance	2000 cycles
Leg floor contact static load per leg	25 kg
Anti-tip stability angle	15 degrees
Recommended service life	5 years
Standard product warranty	365 days
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Upper tabletop core	18mm thick MDF engineered wood
Upper tabletop finish	Matte white UV-cured paint
Lower tabletop core	18mm thick MDF engineered wood
Lower tabletop finish	Matte charcoal black UV-cured paint
Support legs	12mm diameter solid steel rod
Leg finish	Black epoxy powder coating
Leg mounting hardware	M6 zinc-plated steel screws
Floor protection pads	5mm thick self-adhesive felt pads
Edge treatment	1.5mm rounded softened edge
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Nesting space-saving function	Small table tucks fully under large table to reduce footprint by 40% when not in use
Fixed height configuration	No height adjustment, non-tilting tops designed for stable beverage and item placement
Surface maintenance	Matte finish supports wipe-clean care with damp cloth, no special sealant required
Leveling adjustment	Fixed-height legs without adjustable glides, intended for installation on level hard or carpeted floors
Knock-down assembly	Legs attach to pre-drilled underside mounting points with included hex key, no on-site drilling required
Independent use capability	Both tables function as separate side or accent tables when fully pulled apart
Weight distribution design	Four-leg per table layout eliminates wobble on standard low-pile carpet and hard flooring
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential living room placement	Positioned in front of sofas or lounge chairs for beverage, book and decor display
Small apartment use	Nesting design minimizes footprint when extra surface space is not required
Office lounge and reception areas	Suitable for casual waiting areas to hold reading materials and guest refreshments
Flexible event configuration	Separable tables can be distributed across seating groups for small gatherings
Recommended pairing furniture	Low-profile fabric or leather lounge chairs with seat height 450 mm
Surface use limitation	Not intended for hot items over 80 degrees Celsius or heavy equipment over rated load
Flooring compatibility	Suitable for hardwood, tile, laminate, and low-pile carpeted floors

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Furniture strength, durability and safety for domestic tables, applicable to structural performance
EN 16121:2013	Storage and non-domestic seating area table safety requirements, applicable to contract use
EN 13722:2004	Furniture table leg static load test method, applicable to leg stability verification

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to tabletop dimensional and finish acceptance
GB/T 4893.8-2013	Surface wear resistance test for furniture coatings, applicable to matte paint durability verification
GB/T 10357.1-2013	Furniture table mechanical strength test for static load, applicable to load capacity validation

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to tabletop dimensional and finish acceptance；
2. GB/T 4893.8-2013：Surface wear resistance test for furniture coatings, applicable to matte paint durability verification；
3. GB/T 10357.1-2013：Furniture table mechanical strength test for static load, applicable to load capacity validation；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · NCT-PEB-2T-BW-ML

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · NCT-PEB-2T-BW-ML

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · NCT-PEB-2T-BW-ML打开导出工具

页面快速操作

发布采购询价

产品描述

The Two-Tone Irregular Pebble Nesting Coffee Table Set delivers a streamlined contemporary aesthetic defined by its soft, pebble-shaped tabletops and high-contrast two-tone finish. The set includes two scaled tables: the taller, larger table features a matte white tabletop, while the shorter, smaller piece carries a matte charcoal black top, both fitted with slender, uniform black metal legs. When nested, the smaller table tucks fully beneath the larger to create a compact, unified footprint, while pulling the pieces apart creates two distinct surface areas that can be arranged to suit changing layout needs.
Each tabletop is constructed from engineered wood with a UV-cured matte finish, fitted with 1.5mm rounded softened edges to reduce sharp contact points. The slender support legs are made from solid steel rod finished with black epoxy powder coating, mounted to pre-drilled points on the underside of each top with zinc-plated steel screws, and capped with self-adhesive felt floor protection pads to prevent surface scuffing. Each table uses a four-leg layout to deliver stable placement on standard low-pile carpet and hard level flooring, with no wobble under normal use.
The set prioritizes flexible, low-fuss functionality. Its nestable design cuts the overall footprint by 40% when extra surface space is not required, ideal for compact environments. Both tables operate as independent accent or side tables when separated, suitable for spreading across seating zones during small gatherings. The matte, non-porous tabletop finish supports simple wipe-clean maintenance with a damp cloth, with no special sealant required for regular upkeep. Fixed, non-tilting tops provide a stable surface for placing beverages, reading materials and decorative items, though surfaces are not intended for use with hot items exceeding 80 degrees Celsius or loads exceeding rated weight limits.
This set suits a range of both residential and commercial spaces. In residential settings, it works positioned in front of sofas or lounge chairs in living rooms, and is particularly well-suited to small apartments where space efficiency is a priority. For commercial applications, it fits naturally in office lounge and reception waiting areas to hold guest refreshments and reading materials, and can be reconfigured for casual small events by separating the two tables across separate seating groups. It pairs ideally with low-profile fabric or leather lounge chairs. For procurement planning, note that the set ships knock-down for on-site assembly, with all required hardware and a hex key included so no on-site drilling is needed. The product is delivered across two cartons per set, with assembly taking roughly 40 minutes to complete. Fixed-height legs do not include adjustable glides, so placement requires level flooring for optimal stability. The set comes with a 365-day standard product warranty, with a recommended service life of 5 years for regular use.

Two-Tone Irregular Pebble Nesting Coffee Table Set Specifications

供应商与现货