纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	900 × 900 × 450 mm
Overall set footprint (nested)	900 x 900 x 450 mm
Large table diameter	900 mm
Large table overall height	450 mm
Large table top thickness	12 mm
Large table base bottom footprint diameter	600 mm
Large table underside floor clearance	388 mm
Small table diameter	600 mm
Small table overall height	420 mm
Small table top thickness	12 mm
Small table base bottom footprint diameter	400 mm
Minimum offset for full nesting	250 mm
Base metal wall thickness	1.5 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total set gross weight	45 kg
Large table distributed static load capacity	50 kg
Surface scratch resistance rating	6H
Base static stability load	100 kg
Surface water absorption rate	0.02%
Recommended maximum user weight for seating edge	100 kg
Structural warranty period	3 years
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Large table tabletop	Polished white sintered stone slab, sealed smooth edges
Small table tabletop	Polished white sintered stone slab, sealed smooth edges
Large table pedestal base	Black titanium polished mirror-finish stainless steel, welded petal flared structure
Small table pedestal base	Black titanium polished mirror-finish stainless steel, welded petal flared structure
Top to base connection hardware	Stainless steel M8 mounting bolts, reinforced steel connecting plate
Base bottom floor protection pads	5mm thick felt non-slip pads, bonded to each base contact point
Base surface finish	Electroplated black mirror coating, fingerprint-resistant top coat
Tabletop underside substrate	12mm thick reinforced MDF backing layer
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Nesting space-saving function	Small table slides 250mm under large table to reduce footprint when not in use
Surface maintenance function	Non-porous polished top allows wipe-clean removal of spills and stains without sealing
Floor protection function	Felt base pads prevent scratches to hard flooring and low-pile rugs during repositioning
Multi-position configuration	Tables can be arranged side-by-side, offset, or separated for use as standalone side tables
Structural stability feature	Flared multi-facet pedestal base widens at floor contact to prevent tipping under normal use
Assembly requirement	Knock-down assembly requires attaching top to base with provided hardware, no special tools needed
Heat resistance function	Sintered stone top supports placement of warm serving dishes up to 180°C without surface damage
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Primary placement	Positioned in front of 3seater sofas in modern residential living rooms
Alternative use case	Small table used separately as a side table next to armchairs or reading nooks
Style compatibility	Suits light luxury, modern minimalist, and contemporary interior design schemes
Recommended surface use	Display of decorative items, serving drinks, snacks, and reading materials for daily home use
Space suitability	Suitable for small to medium-sized living rooms and open-plan apartment spaces
Commercial use case	Used in hotel lounge areas, boutique reception zones, and showroom display settings
Floor type compatibility	Safe for use on low-pile carpet, hardwood, tile, and luxury vinyl flooring

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Furniture – Strength, durability and safety for domestic tables, applicable for structural performance
EN 13722:2004	Furniture – Test methods for surface resistance to cold liquids, applicable for top finish

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to tabletop substrate quality
GB/T 4897.3-2015	Particleboard/MDF requirements for furniture use, applicable to backing substrate
GB 28007-2011	Formaldehyde emission limits for interior furniture materials, applicable to substrate panels

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to tabletop substrate quality；
2. GB/T 4897.3-2015：Particleboard/MDF requirements for furniture use, applicable to backing substrate；
3. GB 28007-2011：Formaldehyde emission limits for interior furniture materials, applicable to substrate panels；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · NCT-WT9060-BMF

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · NCT-WT9060-BMF

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · NCT-WT9060-BMF打开导出工具

页面快速操作

发布采购询价

产品描述

The 2-Piece Round Nesting Coffee Table Set, model NCT-WT9060-BMF, presents a sleek light luxury modern silhouette defined by clean circular lines and a refined high-contrast finish. Both tables feature smooth white polished round tops paired with polished black mirror-finish flared pedestal bases, with the smaller unit designed to slide neatly beneath the larger table to minimize footprint when not in use, or arranged in offset, side-by-side, or fully separated configurations to suit changing layout needs. Each pedestal uses a welded petal flared structure that widens at the floor contact point to deliver steady support, with a fingerprint-resistant electroplated black mirror coating that retains a polished look through regular handling. Tabletops are crafted from polished white sintered stone with sealed smooth edges, backed by a reinforced MDF layer for structural rigidity, and mounted to bases via stainless steel M8 bolts and reinforced steel connecting plates. Felt non-slip pads bonded to every base contact point prevent scuffs to hard flooring and low-pile rugs during repositioning. Built for functional daily use, the non-porous sintered stone tops support wipe-clean spill and stain removal without additional sealing, resist surface scratches, hold up to placement of warm serving dishes up to 180°C, and carry a 6H scratch resistance rating with 0.02% water absorption. The large table supports 50 kg of distributed static load, while the base delivers 100 kg static stability load, with a recommended maximum edge seating weight of 100 kg, backed by a 3-year structural warranty. The set ships in two cartons for knock-down assembly using included hardware, requiring no special tools and a 40-minute assembly time per set, with a nested overall footprint that fits small to medium residential living rooms, open-plan apartments, hotel lounge areas, boutique reception zones, and showroom displays. It pairs seamlessly with light luxury, modern minimalist, and contemporary interiors, serving as a central surface in front of three-seater sofas for displaying decor, serving drinks and snacks, or holding reading materials, while the smaller table works independently as a side table beside armchairs or reading nooks. Procurement teams should note the packaged gross weight of 90 kg per set across two cartons, with total package volume of 0.55 m³ per set, and account for assembly labor time when planning rollout for residential or commercial projects.

2-Piece Round Nesting Coffee Table Set Specifications

供应商与现货