数据来源
可联系供应商获取生产周期与报价。
PRODUCT MODULE 01 / 06
基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源：工厂资料结构化字段，最终以实测值为准
| 产品外部尺寸（宽 × 深 × 高） | 1800 × 900 × 750 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Under-table knee clearance height | 710 mm | |
| Leg support section width | 50 mm | |
| Leg frame wall thickness | 1.5 mm | |
| Dual base spacing along length | 1100 mm | |
| Base footprint depth per U-frame | 650 mm | |
| Rounded corner radius | 10 mm | |
| Minimum clearance between leg and table edge | 150 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源：产品性能数据，采购前请核对具体测试口径
| Static distributed tabletop load capacity | 250 kg | |
|---|---|---|
| Tabletop surface Mohs hardness | 6 | |
| Tabletop heat resistance | 1200 °C | |
| Tabletop water absorption rate | 0.2% | |
| Recommended seated diner capacity | 6 | |
| Net product weight | 68 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
PRODUCT MODULE 03 / 06
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源：以工厂材质清单与验货报告为准
| Tabletop surface layer | Matte white sintered stone | |
|---|---|---|
| Tabletop reinforcement substrate | 18mm thick high-density MDF | |
| Support frame and legs | Powder-coated matte black carbon steel | |
| Foot pads | Non-slip adjustable TPE floor glides | |
| Frame to top connectors | M8 carbon steel hex bolts with lock washers | |
| Edge finish | Hand-polished seamless sintered stone edge | |
| Surface finish coating on metal | 60 micron thick epoxy powder coat | |
| Tabletop stain resistance class | Class 5 | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
PRODUCT MODULE 04 / 06
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源：功能配置参数，以供应商正式规格为准
| Tabletop configuration | Fixed non-extendable rectangular surface | |
|---|---|---|
| Base leveling | Adjustable floor glides on each leg end | |
| Under-table access | Open unobstructed leg space across full center span | |
| Surface performance | Heat, scratch, and stain resistant tabletop | |
| Assembly structure | Knock-down flat pack assembly | |
| Floor protection | Non-marking glides prevent scuffing on hard floors and rugs | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源：外贸报价与装柜测算参考
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源：依据产品结构与品类整理的推荐应用场景
| Residential dining room | Primary use for 6-person family meals and casual gatherings | |
|---|---|---|
| Open-plan kitchen dining zone | Sleek minimalist design complements modern open-plan interiors | |
| Small restaurant or cafe seating | Durable surface and stable base suitable for light commercial dining use | |
| Apartment dining nooks | 1800mm length fits compact urban dining spaces without overcrowding | |
| Show home or model unit staging | Contemporary black and white finish fits modern interior design schemes |
STANDARD S1
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
| Domestic furniture tables safety requirements | EN 12521:2015 | |
|---|---|---|
| Furniture surface resistance to cold liquids | EN 12720:2013 | |
| Furniture surface resistance to dry heat | EN 12722:2013 |
STANDARD S3
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| Dining table dimensional stability | GB/T 3324 | |
|---|---|---|
| Furniture mechanical safety for tables | GB 28007 | |
| Furniture surface paint film performance | GB/T 4893.1 |
招标文件标准化描述文本
本产品须满足以下技术参数要求： 1. Dining table dimensional stability：GB/T 3324； 2. Furniture mechanical safety for tables：GB 28007； 3. Furniture surface paint film performance：GB/T 4893.1； 最终交付参数、检测报告和验收标准以双方采购合同为准。
GENERATED EXPORTS
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告，可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块，文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具