Primary source
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1800 × 900 × 750 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Under-table knee clearance height | 710 mm | |
| Leg support section width | 50 mm | |
| Leg frame wall thickness | 1.5 mm | |
| Dual base spacing along length | 1100 mm | |
| Base footprint depth per U-frame | 650 mm | |
| Rounded corner radius | 10 mm | |
| Minimum clearance between leg and table edge | 150 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Static distributed tabletop load capacity | 250 kg | |
|---|---|---|
| Tabletop surface Mohs hardness | 6 | |
| Tabletop heat resistance | 1200 °C | |
| Tabletop water absorption rate | 0.2% | |
| Recommended seated diner capacity | 6 | |
| Net product weight | 68 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop surface layer | Matte white sintered stone | |
|---|---|---|
| Tabletop reinforcement substrate | 18mm thick high-density MDF | |
| Support frame and legs | Powder-coated matte black carbon steel | |
| Foot pads | Non-slip adjustable TPE floor glides | |
| Frame to top connectors | M8 carbon steel hex bolts with lock washers | |
| Edge finish | Hand-polished seamless sintered stone edge | |
| Surface finish coating on metal | 60 micron thick epoxy powder coat | |
| Tabletop stain resistance class | Class 5 | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Tabletop configuration | Fixed non-extendable rectangular surface | |
|---|---|---|
| Base leveling | Adjustable floor glides on each leg end | |
| Under-table access | Open unobstructed leg space across full center span | |
| Surface performance | Heat, scratch, and stain resistant tabletop | |
| Assembly structure | Knock-down flat pack assembly | |
| Floor protection | Non-marking glides prevent scuffing on hard floors and rugs | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential dining room | Primary use for 6-person family meals and casual gatherings | |
|---|---|---|
| Open-plan kitchen dining zone | Sleek minimalist design complements modern open-plan interiors | |
| Small restaurant or cafe seating | Durable surface and stable base suitable for light commercial dining use | |
| Apartment dining nooks | 1800mm length fits compact urban dining spaces without overcrowding | |
| Show home or model unit staging | Contemporary black and white finish fits modern interior design schemes |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| Domestic furniture tables safety requirements | EN 12521:2015 | |
|---|---|---|
| Furniture surface resistance to cold liquids | EN 12720:2013 | |
| Furniture surface resistance to dry heat | EN 12722:2013 |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| Dining table dimensional stability | GB/T 3324 | |
|---|---|---|
| Furniture mechanical safety for tables | GB 28007 | |
| Furniture surface paint film performance | GB/T 4893.1 |
Standardized tender description text
This product must meet the following technical requirements: 1. Dining table dimensional stability: GB/T 3324; 2. Furniture mechanical safety for tables: GB 28007; 3. Furniture surface paint film performance: GB/T 4893.1; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool