纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1400 × 350 × 850 mm
Tabletop thickness	30 mm
Black support leg cross-section width	150 mm
Gold support leg cross-section width	200 mm
Leg vertical height	820 mm
Under-table ground clearance	820 mm
Leg rounded corner radius	75 mm
Wall clearance for placement	50 mm
Tabletop edge overhang past legs	125 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Product net weight	50 kg
Evenly distributed tabletop static load	80 kg
Tabletop scratch resistance rating	6 Mohs
Single leg vertical static load capacity	45 kg
Recommended decorative item weight per placement zone	20 kg
Surface stain resistance performance	Grade 5
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles
Recommended Procurement Warranty	Structure 5 years; hardware 3 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop panel	12mm sintered stone core with 18mm reinforced backing, polished light stone finish
Black support leg	1.5mm thick cold-rolled steel, matte black powder-coated finish, rounded vertical panel form
Gold support leg	1.5mm thick stainless steel, brushed champagne gold PVD finish, rounded vertical panel form
Tabletop to leg connection	Heavy-duty steel mounting plates with M8 hex bolts, anti-loosening lock washers
Leg base pads	8mm thick non-slip TPE rubber feet, floor-scratch resistant
Surface edge treatment	45-degree chamfered polished edge on sintered stone top, no sharp corners
Leg weld points	Full penetration welded steel construction, ground smooth before finishing
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Freestanding wall-aligned placement	No wall mounting required, stable on level hard flooring via two vertical support legs
Level adjustment	10mm adjustable height range via TPE foot pads to compensate for uneven floors
Decorative display surface	Flat continuous top for vases, books, art objects and small entry accessories
Open under-table storage	Unobstructed floor space below top for baskets, footwear or decorative objects
Easy surface maintenance	Non-porous sintered stone top wipes clean with damp cloth, resistant to water rings
Asymmetrical visual design	Contrasting black and gold leg finish creates statement focal point for entry spaces
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential entryway/foyer	Slim 350mm depth fits narrow wall spaces behind entry doors for display
Living room sofa back table	1400mm length fits behind standard 3-seat sofas for decor and lighting placement
Luxury hotel corridor accent table	Two-tone gold and black finish matches high-end hospitality interior design schemes
Modern open-plan dining room side table	Provides display surface for tableware, art and serving pieces against dining room walls
Boutique retail display fixture	Stable stone top holds product displays and merchandising decor in retail settings
Hallway end accent table	Compact footprint fits at the end of long corridors to create decorative focal points

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Applicable for strength, durability and stability requirements for domestic tables
EN 13722:2004	Applicable for surface resistance to cold liquids for furniture finishes
EN 1022:2018	Applicable for stability testing of domestic seating and tables

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	Applicable for general technical requirements of wooden and composite furniture tables
GB 18584-2001	Applicable for limit of harmful substances in wood furniture for indoor use
GB/T 4897.3-2015	Applicable for performance requirements of particleboard backing for table tops

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：Applicable for general technical requirements of wooden and composite furniture tables；
2. GB 18584-2001：Applicable for limit of harmful substances in wood furniture for indoor use；
3. GB/T 4897.3-2015：Applicable for performance requirements of particleboard backing for table tops；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CONS-ASYM-BG-1400

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CONS-ASYM-BG-1400

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CONS-ASYM-BG-1400打开导出工具

页面快速操作

发布采购询价

产品描述

The Modern Luxury Sintered Stone Console Table with Asymmetrical Black Gold Rounded Legs, model CONS-ASYM-BG-1400, is an unbranded freestanding console table defined by its bold open-frame asymmetrical silhouette. The design pairs a smooth, continuous polished light stone tabletop with two vertical rounded panel legs in contrasting finishes: one matte black leg and one brushed champagne gold leg, each sized to create deliberate visual imbalance while retaining structural stability. The tabletop features a 45-degree chamfered polished edge with no sharp corners, and sits with consistent under-table clearance to maintain a light, uncluttered profile. The form requires only 50mm of wall clearance for flush aligned placement, and includes TPE rubber foot pads that adjust up to 10mm in height to compensate for uneven hard flooring surfaces. For construction, the tabletop uses a 12mm sintered stone core bonded to an 18mm reinforced backing, with a 30mm total thickness that delivers a 6 Mohs scratch resistance rating and Grade 5 stain resistance. The black leg is formed from 1.5mm thick cold-rolled steel with a matte black powder-coated finish, while the gold leg uses 1.5mm thick stainless steel with a brushed champagne gold PVD finish; both legs feature rounded vertical edges with a 75mm corner radius, built with full penetration welded joints ground smooth before finishing. The tabletop attaches to legs via heavy-duty steel mounting plates secured with M8 hex bolts and anti-loosening lock washers, and each leg is capped with 8mm thick non-slip, floor-scratch resistant TPE feet. The product supports an evenly distributed tabletop static load of 80kg, with each leg rated for 45kg of vertical static load, and recommended 20kg weight limits per individual decorative placement zone. Practically, the table functions as both a display and storage piece: its flat continuous top holds vases, books, art objects, and small entry accessories, while the unobstructed open space underneath accommodates baskets, footwear, or decorative items. The non-porous sintered stone surface wipes clean easily with a damp cloth and resists water rings, simplifying routine upkeep. The piece suits a wide range of settings: its slim depth fits narrow residential entryways and foyers behind entry doors, its length works as a sofa back table for standard three-seat sofas in living rooms, its two-tone finish aligns with high-end hospitality schemes as a luxury hotel corridor accent table, it serves as a side table in modern open-plan dining rooms for tableware and serving piece display, it acts as a stable boutique retail fixture for product merchandising, and it fits compactly at the end of long hallways as a decorative focal point. Six finish options are available to coordinate with varied interior palettes. For procurement, note that the unit ships in two cartons per set, with an 40-minute assembly time per unit; the table is designed for freestanding use only with no wall mounting required, and should be placed on level hard flooring to ensure full stability. For regular use, avoid exceeding recommended per-zone weight limits on the tabletop to preserve long-term structural integrity.

Modern Luxury Sintered Stone Console Table with Asymmetrical Black Gold Rounded Legs Specifications

供应商与现货