| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1400 x 350 x 850 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Black support leg cross-section width | 150 mm | |
| Gold support leg cross-section width | 200 mm | |
| Leg vertical height | 820 mm | |
| Under-table ground clearance | 820 mm | |
| Leg rounded corner radius | 75 mm | |
| Wall clearance for placement | 50 mm | |
| Tabletop edge overhang past legs | 125 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Product net weight | 50 kg | |
|---|---|---|
| Evenly distributed tabletop static load | 80 kg | |
| Tabletop scratch resistance rating | 6 Mohs | |
| Single leg vertical static load capacity | 45 kg | |
| Recommended decorative item weight per placement zone | 20 kg | |
| Surface stain resistance performance | Grade 5 | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop panel | 12mm sintered stone core with 18mm reinforced backing, polished light stone finish | |
|---|---|---|
| Black support leg | 1.5mm thick cold-rolled steel, matte black powder-coated finish, rounded vertical panel form | |
| Gold support leg | 1.5mm thick stainless steel, brushed champagne gold PVD finish, rounded vertical panel form | |
| Tabletop to leg connection | Heavy-duty steel mounting plates with M8 hex bolts, anti-loosening lock washers | |
| Leg base pads | 8mm thick non-slip TPE rubber feet, floor-scratch resistant | |
| Surface edge treatment | 45-degree chamfered polished edge on sintered stone top, no sharp corners | |
| Leg weld points | Full penetration welded steel construction, ground smooth before finishing | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Freestanding wall-aligned placement | No wall mounting required, stable on level hard flooring via two vertical support legs | |
|---|---|---|
| Level adjustment | 10mm adjustable height range via TPE foot pads to compensate for uneven floors | |
| Decorative display surface | Flat continuous top for vases, books, art objects and small entry accessories | |
| Open under-table storage | Unobstructed floor space below top for baskets, footwear or decorative objects | |
| Easy surface maintenance | Non-porous sintered stone top wipes clean with damp cloth, resistant to water rings | |
| Asymmetrical visual design | Contrasting black and gold leg finish creates statement focal point for entry spaces | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential entryway/foyer | Slim 350mm depth fits narrow wall spaces behind entry doors for display | |
|---|---|---|
| Living room sofa back table | 1400mm length fits behind standard 3-seat sofas for decor and lighting placement | |
| Luxury hotel corridor accent table | Two-tone gold and black finish matches high-end hospitality interior design schemes | |
| Modern open-plan dining room side table | Provides display surface for tableware, art and serving pieces against dining room walls | |
| Boutique retail display fixture | Stable stone top holds product displays and merchandising decor in retail settings | |
| Hallway end accent table | Compact footprint fits at the end of long corridors to create decorative focal points |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Applicable for strength, durability and stability requirements for domestic tables | |
|---|---|---|
| EN 13722:2004 | Applicable for surface resistance to cold liquids for furniture finishes | |
| EN 1022:2018 | Applicable for stability testing of domestic seating and tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applicable for general technical requirements of wooden and composite furniture tables | |
|---|---|---|
| GB 18584-2001 | Applicable for limit of harmful substances in wood furniture for indoor use | |
| GB/T 4897.3-2015 | Applicable for performance requirements of particleboard backing for table tops |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applicable for general technical requirements of wooden and composite furniture tables; 2. GB 18584-2001: Applicable for limit of harmful substances in wood furniture for indoor use; 3. GB/T 4897.3-2015: Applicable for performance requirements of particleboard backing for table tops; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
