纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2600 × 1080 × 1016 mm
seat height	457 mm
seat depth per position	572 mm
seat width per position	673 mm
backrest height above seat	559 mm
armrest width	290 mm
armrest height above floor	610 mm
minimum entry door clearance	635 mm
footrest extension length	495 mm
Seat Cushion Thickness	180 mm
Back Cushion Thickness	160 mm
Leg Height / Floor Clearance	160 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

net weight	227 kg
static weight capacity per seat	159 kg
total static weight capacity	476 kg
backrest recline angle range	160 degrees
foam density (seat cushions)	35 kg/m³
foam density (backrest cushions)	28 kg/m³
upholstery abrasion resistance	50000 Martindale cycles
seat spring coil count	27 coils per seat
limited warranty period	6 months
Seat Foam Density / Rebound	40 kg/m³ / 60%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

external upholstery	1.0 mm thick black polyurethane faux leather
seat cushion filling	High-resiliency polyurethane foam wrapped in 200g polyester fiber
seat support core	Individually wrapped 1.8 mm steel pocket coil springs
internal load frame	Kiln-dried 40 mm hardwood with 1.5 mm steel reinforcement brackets
recline mechanism	Powder-coated cold-rolled steel manual latch assembly
backrest cushion filling	28 kg/m³ polyurethane foam wrapped in non-woven fabric
armrest construction	Fully padded, curved rolled design with foam core over rigid wood frame
base feet	50 mm tall black polymer hidden low-profile feet
upholstery stitching	Reinforced bonded polyester thread at 8 stitches per inch
Timber Frame Section / Moisture	Primary section ≥30 × 50 mm; recommended moisture 12%
Spring / Webbing Specification	Sinuous spring wire 4 mm; elastic webbing 70 mm wide
Leg Connector Specification	Reference M8-M10 with at least 1 mechanical fixing per leg

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

independent seat recline	Two outer seats recline via side pull lever, middle seat remains fixed
footrest operation	Pull lever releases integrated footrest, which locks in extended position
backrest adjustment	Lean back against backrest after lever release to adjust to preferred angle
upright seating position	Fixed 105° back angle for formal seating when footrest is fully retracted
tool-free final assembly	Back sections slide and lock onto pre-assembled base unit
non-marring floor protection	Hidden polymer feet prevent scuffing on low-pile carpet and hard flooring
split back support design	Three separate segmented back cushions provide independent lumbar support
seat contouring	Dual recessed seat cushion design promotes neutral seated posture
fully reclined overall depth	1575 mm
Cushion Service Configuration	Recommended 2removable/replaceable cushion methods

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Module Carton Dimensions	2200× 1050× 850 mm
Reference Packaging Volume	1.8 m³/item
Reference Packaged Gross Weight	110 kg/item

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

executive office lounge	Formal black finish provides professional appearance for informal client meetings
modern residential living room	Low-profile curved arm design complements minimalist contemporary interior decor
home theater media room	Reclining function supports extended viewing comfort with extended footrest support
corporate reception waiting area	Three-seat capacity accommodates multiple visitors with easy-clean upholstery
breakout collaboration space	Seating supports 3 users for casual team discussions or short rest breaks
private executive office	Placed against a wall to provide additional guest seating opposite an executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335:2000	Office furniture seating strength and stability standards, applicable for office lounge use
EN 1022:2018	Domestic furniture seating stability requirements for upright and reclined positions

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to internal hardwood frame structure
GB 20400-2006	Leather and fur safety limits for harmful substances, applicable to faux leather upholstery
GB/T 1952.1-2012	Strength and durability test methods for sofas, applicable to static load and recline mechanism testing

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to internal hardwood frame structure；
2. GB 20400-2006：Leather and fur safety limits for harmful substances, applicable to faux leather upholstery；
3. GB/T 1952.1-2012：Strength and durability test methods for sofas, applicable to static load and recline mechanism testing；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · RS-3S-BK-2600

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · RS-3S-BK-2600

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · RS-3S-BK-2600打开导出工具

页面快速操作

发布采购询价

产品描述

The Black Faux Leather Three-Seat Manual Reclining Sofa (model RS-3S-BK-2600) features a streamlined three-seat inline layout, with split, segmented backrests and fully padded, curved rolled armrests that lend a polished, tailored silhouette. Its low-profile hidden black feet keep visual focus on smooth, uniform black upholstery, creating a clean, uncluttered profile suited to both professional and residential interiors.
Built for long-term regular use, the sofa combines a kiln-dried hardwood frame reinforced with steel brackets, paired with a powder-coated cold-rolled steel manual recline mechanism. Seat support comes from individually wrapped steel pocket coil springs, topped with high-resiliency polyurethane seat cushions wrapped in soft polyester fiber, and softer polyurethane back cushions wrapped in non-woven fabric. The 1.0mm thick black polyurethane faux leather upholstery is stitched with reinforced bonded polyester thread for durable seam integrity, while 50mm tall black polymer feet sit flush to the floor to avoid scuffing on hard flooring and low-pile carpet.
Practical function is centered on user comfort and ease of setup: the two outer seats recline independently via discreet side pull levers, which release integrated footrests that lock securely in the extended position. After activating the lever, users can lean back to adjust the backrest to a maximum 160-degree recline, while the middle seat remains fixed for stable upright seating. When footrests are fully retracted, the backrest holds a formal 105-degree angle for structured, upright use. Final assembly requires no tools, as back sections slide and lock onto the pre-assembled base for quick installation.
This sofa fits a wide range of spaces: its formal black finish works for executive office lounges, corporate reception waiting areas, private executive offices, and casual breakout collaboration spaces, while its low-profile curved arm design complements minimalist modern residential living rooms, and its recline function supports extended comfort for home theater media rooms. Its easy-clean upholstery and three-seat capacity accommodate multiple users for both short visits and longer seated sessions.
For procurement planning, note the sofa requires a minimum entry door clearance for delivery, ships in two cartons per set, and has a listed per-seat static weight capacity to support a range of users. Reference assembly time runs 40 minutes per set, making it suitable for quick turnarounds on furnishing projects.

Black Faux Leather Three-Seat Manual Reclining Sofa Specifications

供应商与现货