Product supplierBlack Faux Leather Three-Seat Manual Reclining Sofa, 1.0 mm thick black polyurethane faux leather
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2600 × 1080 × 1016 mm | |
|---|---|---|
| seat height | 457 mm | |
| seat depth per position | 572 mm | |
| seat width per position | 673 mm | |
| backrest height above seat | 559 mm | |
| armrest width | 290 mm | |
| armrest height above floor | 610 mm | |
| minimum entry door clearance | 635 mm | |
| footrest extension length | 495 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| net weight | 227 kg | |
|---|---|---|
| static weight capacity per seat | 159 kg | |
| total static weight capacity | 476 kg | |
| backrest recline angle range | 160 degrees | |
| foam density (seat cushions) | 35 kg/m³ | |
| foam density (backrest cushions) | 28 kg/m³ | |
| upholstery abrasion resistance | 50000 Martindale cycles | |
| seat spring coil count | 27 coils per seat | |
| limited warranty period | 6 months | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| external upholstery | 1.0 mm thick black polyurethane faux leather | |
|---|---|---|
| seat cushion filling | High-resiliency polyurethane foam wrapped in 200g polyester fiber | |
| seat support core | Individually wrapped 1.8 mm steel pocket coil springs | |
| internal load frame | Kiln-dried 40 mm hardwood with 1.5 mm steel reinforcement brackets | |
| recline mechanism | Powder-coated cold-rolled steel manual latch assembly | |
| backrest cushion filling | 28 kg/m³ polyurethane foam wrapped in non-woven fabric | |
| armrest construction | Fully padded, curved rolled design with foam core over rigid wood frame | |
| base feet | 50 mm tall black polymer hidden low-profile feet | |
| upholstery stitching | Reinforced bonded polyester thread at 8 stitches per inch | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| independent seat recline | Two outer seats recline via side pull lever, middle seat remains fixed | |
|---|---|---|
| footrest operation | Pull lever releases integrated footrest, which locks in extended position | |
| backrest adjustment | Lean back against backrest after lever release to adjust to preferred angle | |
| upright seating position | Fixed 105° back angle for formal seating when footrest is fully retracted | |
| tool-free final assembly | Back sections slide and lock onto pre-assembled base unit | |
| non-marring floor protection | Hidden polymer feet prevent scuffing on low-pile carpet and hard flooring | |
| split back support design | Three separate segmented back cushions provide independent lumbar support | |
| seat contouring | Dual recessed seat cushion design promotes neutral seated posture | |
| fully reclined overall depth | 1575 mm | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| executive office lounge | Formal black finish provides professional appearance for informal client meetings | |
|---|---|---|
| modern residential living room | Low-profile curved arm design complements minimalist contemporary interior decor | |
| home theater media room | Reclining function supports extended viewing comfort with extended footrest support | |
| corporate reception waiting area | Three-seat capacity accommodates multiple visitors with easy-clean upholstery | |
| breakout collaboration space | Seating supports 3 users for casual team discussions or short rest breaks | |
| private executive office | Placed against a wall to provide additional guest seating opposite an executive desk |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 1335:2000 | Office furniture seating strength and stability standards, applicable for office lounge use | |
|---|---|---|
| EN 1022:2018 | Domestic furniture seating stability requirements for upright and reclined positions |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to internal hardwood frame structure | |
|---|---|---|
| GB 20400-2006 | Leather and fur safety limits for harmful substances, applicable to faux leather upholstery | |
| GB/T 1952.1-2012 | Strength and durability test methods for sofas, applicable to static load and recline mechanism testing |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal hardwood frame structure; 2. GB 20400-2006: Leather and fur safety limits for harmful substances, applicable to faux leather upholstery; 3. GB/T 1952.1-2012: Strength and durability test methods for sofas, applicable to static load and recline mechanism testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool