纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	600 × 500 × 630 mm
Side Rail Thickness	40 mm
Slat Spacing	80 mm
Center Support Leg Count	Recommended 6legs

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total product net weight	42 kg
Per-drawer static load capacity	15 kg
Rotation mechanism cycle life	12000 cycles
Drawer slide static load rating	20 kg
Recommended maximum user weight on top surface	50 kg
Total internal storage volume	108 L
Bed Static Load Reference	400 kg
Per-slat Load Reference	60 kg
Recommended Procurement Warranty	Frame 10 years; hardware 5 years; upholstery 2 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Drawer body core material	18mm thick MDF core
Exterior surface finish	Natural walnut wood veneer, matte clear lacquer topcoat
Drawer pulls (top/bottom tiers)	Matte black powder-coated zinc alloy
Drawer pull (middle tier)	Brushed nickel plated zinc alloy
Internal rotation pivot hardware	Carbon steel rotating bearing assembly
Drawer slides	Side-mounted soft-close ball bearing slides
Interior drawer lining	Matte black anti-scratch melamine finish
Base contact pads	Non-slip felt pads
Drawer panel edge banding	0.6mm thick PVC edge banding matched to veneer tone
Slat Thickness	15 mm bent plywood or solid timber
Primary Connector Specification	Reference M8-M10 bolts with at least 2 fixing points per corner
Reference Finish / Color Count	Recommended 6timber/upholstery options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Independent tier rotation	Each drawer unit rotates 360 degrees around central pivot
Soft-close drawer operation	Drawers close silently with self-latching mechanism
Single-tab drawer actuation	Vertical pull tabs require 12N pull force to open
Stacked modular alignment	Locating pins between tiers prevent lateral slippage
Smooth rotation operation	Sealed bearing provides 360 degree swivel with 5N rotational force
Scratch-resistant top surface	UV-cured lacquer resists minor abrasions from daily use
Floor protection design	Felt base pads eliminate scuffs on hardwood or tile floors
Flush-front storage design	Drawer fronts sit flush with enclosure edges when closed
Stack rotation offset per drawer	18 degrees
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2300× 900× 450 mm/carton in 4 cartons
Reference Packaged Gross Weight	130 kg/set
Reference Packaging Volume	0.9 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential bedroom bedside use	Placed adjacent to beds for storage of books, devices and personal items
Modern living room side table use	Positioned next to sofas for remote controls, drinks and decorative objects
Contemporary studio accent storage	Used as standalone sculptural storage in open-plan living spaces
Home office under-desk storage	Placed beside home office desks for stationery and document storage
Luxury hotel guest room furnishing	Installed in boutique hotel rooms for guest amenity and personal item storage
Recommended matching furniture	Pairs with low-profile walnut wood bed frames, minimalist sofas and neutral tone decor

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 14749:2016	Safety and strength requirements for domestic storage furniture, applicable for stability verification
EN 12520:2015	Furniture seating and storage strength, durability and stability requirements
EN 71-3:2019	Migration of certain elements, applicable for surface finish safety in residential use

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for panel strength and finish durability
GB 18584-2001	Limit of harmful substances in wooden furniture, applicable for formaldehyde emission testing
GB/T 4893.4-2013	Surface furniture wear resistance test, applicable for veneer lacquer finish performance
GB/T 10357.5-2011	Furniture mechanical performance test for storage units, applicable for drawer load testing

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable for panel strength and finish durability；
2. GB 18584-2001：Limit of harmful substances in wooden furniture, applicable for formaldehyde emission testing；
3. GB/T 4893.4-2013：Surface furniture wear resistance test, applicable for veneer lacquer finish performance；
4. GB/T 10357.5-2011：Furniture mechanical performance test for storage units, applicable for drawer load testing；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · NS-ROT-3DW-600

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · NS-ROT-3DW-600

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · NS-ROT-3DW-600打开导出工具

页面快速操作

发布采购询价

产品描述

The Rotating Stacked 3-Drawer Walnut Veneer Nightstand (model NS-ROT-3DW-600) is a contemporary unbranded bedside storage piece defined by its distinct stacked, modular visual structure. Its streamlined rectangular form arranges three aligned drawer tiers around a central vertical pivot, with a matte natural walnut veneer exterior accented by mixed metal hardware—matte black powder-coated zinc alloy pulls on the top and bottom tiers, and a brushed nickel plated zinc alloy pull on the middle tier—creating subtle tonal contrast that complements modern design schemes. A matte clear lacquer topcoat protects the exterior, while 0.6mm PVC edge banding matched to the veneer tone delivers clean, seamless panel edges. The piece is built on an engineered wood core, with each drawer body constructed from 18mm thick MDF lined with scratch-resistant matte black melamine. Internal hardware includes a carbon steel rotating bearing assembly for the pivot mechanism, side-mounted soft-close ball bearing drawer slides, and non-slip felt pads at the base to prevent floor damage. Each individual drawer tier rotates a full 360 degrees around the central pivot, guided by a sealed bearing that enables smooth swivel operation with light applied force. Locating pins between tiers prevent lateral slippage during rotation or regular use. Drawers operate with a silent soft-close, self-latching action, and open via vertical pull tabs with light actuation force. The UV-cured top surface resists minor daily abrasions, and supports a maximum recommended user weight; each drawer holds a rated static load, with total internal storage volume accommodating everyday personal items. The felt base pads eliminate scuffs on hardwood and tile flooring. This versatile piece fits both residential and commercial spaces. It serves as a traditional bedside nightstand in residential bedrooms for storing books, devices and personal items, works as a side table next to sofas in modern living rooms for remotes, drinks and decor, acts as sculptural standalone accent storage in contemporary open-plan studios, and provides convenient under-desk or beside-desk storage for stationery and documents in home offices. It is also suitable for installation in luxury boutique hotel guest rooms to hold guest amenities and personal belongings, pairing seamlessly with low-profile walnut wood bed frames, minimalist sofas, and neutral tone decor. For procurement, note the product ships across multiple cartons per set, with a reference assembly time of 40 minutes per unit. Buyers should account for the total packaged weight and volume when planning shipping and on-site handling, and confirm weight capacity aligns with intended use cases prior to specification.

Rotating Stacked 3-Drawer Walnut Veneer Nightstand Specifications

供应商与现货