纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Seating capacity	3 users
Distributed desktop load	80 kg per workstation
Single-point desktop load	30 kg
Pedestal and panel support load	50 kg per end support
Suggested occupant weight allowance	120 kg per seated position
Drawer slide cycle target	40000 cycles
Net weight	180 kg
Floor loading	31 kg per square meter
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Work surface	25 mm wood-grain high-pressure laminate panel with sealed impact-resistant edges
Support and modesty panels	18 mm grey laminate-coated panel with black lower inset panels
Privacy screen core	16 mm composite furniture panel with grey frame trim
Upper louver screen	Horizontal silver-toned slats in a framed divider with vertical support posts
Structural frame	Rectangular steel support rails and connector posts with powder-coated grey finish
Edge and joining hardware	PVC edge banding, steel cam connectors, brackets, and adjustable floor glides

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Workstation configuration	Three in-line corner workstations allow independent seating while sharing connected divider panels
Privacy division	Solid lower panels block desk-level sightlines and slatted upper panels reduce visibility without fully sealing the space
Cable management	60 mm rear-corner grommet routes monitor and power cables below each desktop
Knee-space design	Curved front modesty cutout creates a centered seated opening with side support panels

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open-plan office	Suitable for three-person clerical, administration, or customer-service clusters where privacy and shared footprint efficiency are required
Call center or shared administration area	Recommended for repeatable rows in high-density offices because each seat has an independent L-shaped surface, cable grommet, and knee opening

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Office furniture safety	EN 527:2011 safety requirements for office desks and work tables
Office furniture stability	EN 527:2011 mechanical safety and test methods
Office storage safety	EN 14073:2004 safety requirements for office storage furniture
Formaldehyde panel classification	EN 13986 wood-based panel formaldehyde classification

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

Desk strength and fatigue	ANSI/BIFMA X5.5 desk and table products standard
Storage performance	ANSI/BIFMA X5.9 storage units standard
Seated-use stability	ANSI/BIFMA X5.5 tip-over and stability test protocol

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Structural safety acceptance	GB/T 3324 general technical requirements for wooden furniture
Physical and dimensional inspection	GB/T 3326furniture dimensional inspection basis
Formaldehyde control	GB 18580formaldehyde emission limit for wood-based panels
Surface durability test	GB/T 4893.4adhesion test for film-coated furniture surfaces

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Structural safety acceptance：GB/T 3324 general technical requirements for wooden furniture；
2. Physical and dimensional inspection：GB/T 3326furniture dimensional inspection basis；
3. Formaldehyde control：GB 18580formaldehyde emission limit for wood-based panels；
4. Surface durability test：GB/T 4893.4adhesion test for film-coated furniture surfaces；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · WS-CUB3-L-INLINE

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · WS-CUB3-L-INLINE

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · WS-CUB3-L-INLINE打开导出工具

页面快速操作

发布采购询价

产品描述

The Three-Person In-Line L-Shaped Cubicle Workstation combines three connected corner workstations in a linear layout, giving each occupant an independent L-shaped desk while using shared divider panels to make efficient use of floor space. Its visual character is defined by brown wood-grain laminate work surfaces, grey support and modesty panels, black lower inset accents, and silver-toned horizontal slatted privacy screens. The framed upper dividers are held by vertical support posts, creating an orderly commercial appearance that separates users without enclosing the cluster completely. Construction is based on a rectangular steel support rail and connector-post frame with a powder-coated grey finish. Work surfaces use 25 mm wood-grain high-pressure laminate panels with sealed impact-resistant edges, while support and modesty panels use 18 mm grey laminate-coated panels with black lower inset sections. Privacy screens have a 16 mm composite furniture-panel core with grey frame trim, and upper dividers feature horizontal silver-toned slats. PVC edge banding, steel cam connectors, brackets, and adjustable floor glides complete the joining and leveling hardware. Primary component thickness follows load-bearing role at 40 mm, and moving hardware is allowed 5 mm operating clearance. Each workstation is designed for one user, with three seated positions in total. Solid lower panels block desk-level sightlines, and slatted upper panels reduce visibility while retaining a more open feel than full-height panels. Every position includes a 60 mm rear-corner cable grommet for routing monitor and power cables below the desktop, helping keep shared work surfaces uncluttered. The curved front modesty cutout forms a centered knee opening with side support panels, supporting comfortable seating while maintaining visual separation. The configuration is well suited to open-plan offices, especially clerical, administration, and customer-service teams that require individual work zones within a compact shared footprint. It is also appropriate for call centers and shared administration areas where repeatable rows can create high-density, organized seating clusters with consistent desk access, cable routing, and privacy screening. Rated capacities include an 80 kg distributed desktop load per workstation, a 30 kg single-point desktop load, 50 kg for each pedestal or panel end support, and a 120 kg occupant weight allowance per seated position. The drawer slide cycle target is 40000 cycles. Procurement teams should plan for two cartons per set, 0.8 cubic meters of packaging volume per set, and a packaged gross weight of 120 kg per set; reference assembly time is 40 minutes per set. Buyers should also confirm site access, floor load suitability, cable layout, and the number of sets needed for planned rows or team clusters.

Three-Person In-Line L-Shaped Cubicle Workstation with Privacy Screens Specifications

供应商与现货