纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	4200 × 2800 × 1200 mm
Overall cluster dimensions	4200 x 2800 x 1200 mm
Single L-station worktop dimensions	1400 x 1200 x 750 mm
Desktop thickness	25 mm
Partition panel total height	1200 mm
Partition panel thickness	32 mm
Opaque lower partition height	700 mm
Translucent slatted upper partition height	500 mm
Under-desk knee clearance height	620 mm
Knee clearance minimum width per station	600 mm
Worktop depth (main work surface)	600 mm
Mobile storage pedestal dimensions	400 x 500 x 600 mm
Cable grommet diameter per station	60 mm
Support panel thickness	18 mm
Caster wheel diameter on pedestals	50 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Per-station desktop static load capacity	300 kg
Mobile pedestal drawer static load per drawer	30 kg
Recommended user count per cluster	3
Partition sound transmission class (STC) reference	22 dB
Surface scratch resistance rating	Class 2
Net weight per complete 3-station cluster	280 kg
Design service life	10 years
Desktop heat resistance (short-term)	120 °C
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Worktop panels	25mm E1 grade MFC with melamine laminate, PVC edge banding
Partition lower panels	18mm charcoal MFC with matte melamine finish
Partition upper sections	Translucent frosted acrylic horizontal slats with aluminum trim
Partition support frames	Anodized aluminum alloy profile connectors, 1.2mm wall thickness
Desk support panels/legs	18mm matching MFC panels with powder-coated steel internal brackets
Mobile pedestal cabinets	18mm beige MFC carcass, lockable drawer and door, PVC edging
Pedestal casters	50mm nylon swivel casters, 2 lockable brakes per unit
Drawer slides	Ball-bearing full-extension steel slides, 350mm travel length
Cabinet door hinges	Soft-close concealed steel hinges, 110° opening angle
Cable grommets	ABS plastic round grommets with brush seal, located per station
Surface finish performance	Stain-resistant, water-resistant, easy-to-clean melamine coating
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Privacy divider configuration	1200mm half-height partitions separate each station, reducing visual distraction
Cable management system	Grommet access per worktop, hidden internal routing channels along partition frames
Mobile pedestal mobility	Swivel casters allow pedestals to be repositioned under desks or beside stations
Storage security	Pedestal drawers include integrated key locks to secure personal documents and belongings
Modular reconfiguration capability	Aluminum frame connectors allow layout adjustment or additional stations to be added
Work surface orientation	Each L-station provides dual work zones for computer work and document writing
Pedestal storage layout	Each mobile unit includes one lockable drawer, one open shelf, and one enclosed cabinet for storage
Assembly structure	Knock-down flat-pack construction with cam-lock connectors for on-site assembly
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open-plan corporate offices	Provides individual semi-private workstations in collaborative open office layouts
Small to medium business work areas	Supports 3 staff in a compact linear footprint for startup or branch offices
Call center and admin departments	Balances personal workspace definition with easy team accessibility
Modular office fit-out projects	Compatible with standard commercial cubicle layout planning and expansion
Workstation clusters with built-in storage	Eliminates need for separate under-desk filing units for personal storage
Long-term commercial office installation	Durable panel construction suitable for high-traffic daily office use

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-1:2011	Office worktables, safety and strength requirements for commercial use
EN 527-2:2016	Office worktables, dimensional and mechanical strength requirements
EN 13986:2004+A1:2015	Wood-based panels for construction and furniture, E1 formaldehyde class
EN 14073-2:2004	Office storage furniture, safety and strength requirements for pedestals

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.5 办公桌及桌类产品

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to panel office desk systems
GB/T 3327-2016	Performance requirements for office desks and workstations
GB 18580-2017	Formaldehyde emission limits for wood-based panels, E1 grade ≤0.124mg/m³ requirement
GB/T 4893.4-2013	Surface wear resistance test for furniture coatings and laminates
GB/T 4893.7-2013	Surface heat resistance test for furniture finishes

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to panel office desk systems；
2. GB/T 3327-2016：Performance requirements for office desks and workstations；
3. GB 18580-2017：Formaldehyde emission limits for wood-based panels, E1 grade ≤0.124mg/m³ requirement；
4. GB/T 4893.4-2013：Surface wear resistance test for furniture coatings and laminates；
5. GB/T 4893.7-2013：Surface heat resistance test for furniture finishes；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CWS-3L-1400-MP

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CWS-3L-1400-MP

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CWS-3L-1400-MP打开导出工具

页面快速操作

发布采购询价

产品描述

The 3-Person Linear L-Shaped Office Cubicle Workstation Cluster with Privacy Partitions and Mobile Storage Pedestals (model CWS-3L-1400-MP, unbranded) is a commercial-grade modular office cubicle cluster designed for balanced semi-private productivity and collaborative access. The cluster features a clean two-tone neutral finish, with three connected L-shaped workstations arranged in a linear footprint measuring 4200 x 2800 x 1200 mm overall. Half-height privacy partitions divide each station: 700mm tall opaque charcoal matte melamine lower panels reduce direct visual distraction at seated eye level, while 500mm tall frosted translucent horizontal acrylic slats trimmed in anodized aluminum preserve open sightlines across the broader workspace without compromising individual focus. Each 1400 x 1200 x 750 mm L-shaped worktop is 25mm thick, constructed from E1 grade melamine-faced MFC with durable PVC edge banding, paired with matching MFC desk support panels reinforced by powder-coated steel internal brackets for structural stability. Under-desk knee clearance of 620mm supports comfortable seated use, and each worktop supports a 300 kg static load. Partitions are framed with 1.2mm wall thickness anodized aluminum alloy profiles, enabling simple modular reconfiguration to adjust layouts or add matching stations as team needs change. Each station is paired with a mobile storage pedestal built from 18mm beige MFC with PVC edging, rolling on 50mm nylon swivel casters with two lockable brakes per unit to allow flexible repositioning under desks or adjacent to work areas. Each pedestal includes a lockable drawer with 30 kg static load capacity running on full-extension ball-bearing steel slides, an open shelf, and an enclosed cabinet with 110° opening soft-close concealed steel hinges, with integrated key locks to secure personal documents and belongings and eliminate the need for separate under-desk filing units. Integrated cable management features desk grommets per worktop and hidden internal routing channels along partition frames to organize power and data cords, while the partition system delivers a 22 dB STC reference rating to soften cross-station ambient noise. Work surfaces hold a Class 2 scratch resistance rating, and the complete cluster carries a 10-year design service life for high-traffic daily use. This cluster is suited for open-plan corporate offices, small to medium business work areas including startup and branch locations, call center and administrative departments, and phased modular office fit-out projects, supporting three users in a space-efficient footprint. For procurement, note the set ships in two cartons, requires 40 minutes of reference assembly time, has a 0.8 m³ packaging volume, and a 120 kg packaged gross weight, with a complete assembled net weight of 280 kg; the system is compatible with standard commercial cubicle layout planning for seamless future expansion.

3-Person Linear L-Shaped Office Cubicle Workstation Cluster with Privacy Partitions and Mobile Storage Pedestals Specifications

供应商与现货