纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2820 × 1420 × 1100 mm
Standard worksurface height	750 mm
Worksurface thickness	25 mm
Privacy partition thickness	60 mm
Per-workstation main work surface width	1400 mm
Per-workstation return surface depth	700 mm
Knee clearance height under worksurface	680 mm
Knee clearance opening width per station	700 mm
Mobile pedestal dimensions	400 x 500 x 650 mm
Upper slatted vented partition height	320 mm
Lower solid partition panel height	780 mm
Cable grommet diameter	60 mm
Caster wheel diameter	50 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Uniform worksurface static load capacity	120 kg
Mobile pedestal drawer static load per drawer	30 kg
Recommended maximum user weight per workstation	110 kg
Total workstation net weight	160 kg
Worksurface abrasion resistance rating	2000 cycles
Surface scratch resistance rating	2H pencil hardness
Partition frame static load for hanging accessories	10 kg
Structural warranty period	5 years
Available color finish options	6
Reference Static Load	150 kg depending on category

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Worksurface core and finish	E1-grade melamine-faced particleboard, 25 mm thick, vertical light wood grain
Worksurface edge treatment	2 mm thick PVC edge banding, impact and water resistant
Lower privacy partition panel	Fabric-wrapped MDF core, muted sage green matte finish
Upper partition section	Slatted vented plastic/acoustic panel with aluminum retaining trim
Partition support framing	Powder-coated aluminum extrusion, dark neutral finish, modular connection brackets
Mobile pedestal body	18 mm thick melamine-faced particleboard, matching light wood grain with sage green drawer front
Mobile pedestal hardware	Black epoxy-coated steel drawer slides, recessed plastic/steel pull handle, 360-degree swivel casters
Modesty panel under worksurface	18 mm thick melamine-faced particleboard, matching light wood grain, fixed to desk frame
Cable management components	ABS plastic cable grommet, concealed under-desk PVC cable raceway
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Per-station storage layout	One integrated rolling mobile pedestal per workstation, fits fully under desk top
Mobile pedestal mobility	Four 360-degree swivel nylon casters, two with lock function, drawer holds A4 files
Cable management system	Corner desk grommet routes power/data cables to under-desk raceway, hides wiring
Privacy partition function	1100 mm tall screens block seated line of sight, upper slats allow air circulation
Modular reconfiguration	Aluminum frame connectors allow repositioning or expansion of the cubicle layout
Foot adjustment	Threaded adjustable leveling feet on desk legs compensate for uneven office floors
Partition accessory compatibility	Integrated aluminum slots support hanging file pockets, monitor arms and task lighting
Assembly configuration	Flat-pack knock-down assembly with cam-lock and bolt fasteners for on-site build
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open-plan office space	Designed for 2 adjacent staff positions with seated privacy between users
Small team work zones	Suitable for administrative, finance or customer service teams needing focused work space
Startup and flexible office environments	Modular design supports later expansion to larger cubicle clusters
Corporate staff work areas	Neutral sage and light wood finish coordinates with modern commercial office interiors
Branch office deployments	Flat-pack packaging reduces freight cost for multi-site office furnishing projects
Recommended pairing	Use with mid-back ergonomic office chairs, desktop monitor arms and under-desk CPU holders

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-1:2011	Office worktables safety and strength requirements, applies to worksurface and frame design
EN 527-2:2016	Office worktables dimensional and mechanical performance requirements
EN 1335-1:2020	Office furniture seating dimensional coordination, applies to knee clearance sizing
EN 1022:2018	Furniture stability test methods for seating and storage units

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.5-2021	Desk products performance standard, applies to static load and durability testing
ANSI/BIFMA X5.9-2019	Storage units performance standard, applies to mobile pedestal testing
ANSI/BIFMA X7.1-2020	Formaldehyde emission standard for low-emitting office furniture

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden office furniture, applies to desk surfaces and storage components
GB/T 3327-2016	Performance test methods for office desks, applies to structural load and stability verification
GB 18580-2017	Formaldehyde emission limits for wood-based panels, applies to E1-grade particleboard components
GB/T 4897.3-2015	Performance requirements for particleboard used in furniture, applies to desk core materials

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden office furniture, applies to desk surfaces and storage components；
2. GB/T 3327-2016：Performance test methods for office desks, applies to structural load and stability verification；
3. GB 18580-2017：Formaldehyde emission limits for wood-based panels, applies to E1-grade particleboard components；
4. GB/T 4897.3-2015：Performance requirements for particleboard used in furniture, applies to desk core materials；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CUB-L2-CURV-SAGE2820

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CUB-L2-CURV-SAGE2820

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CUB-L2-CURV-SAGE2820打开导出工具

页面快速操作

发布采购询价

产品描述

This 2-person L-shaped cubicle workstation is designed to deliver functional, privacy-focused workspace for two adjacent users, with a curved L-corner layout optimized for underutilized corner floor space. The unit features integrated partitions that rise to a height that blocks seated line of sight between users, with a muted sage green fabric-wrapped lower panel and slatted, vented upper panel trimmed in aluminum to maintain air flow while reducing visual distraction. Worksufaces carry a vertical light wood grain finish, paired with matching modesty panels and mobile pedestal bodies that coordinate with sage green drawer fronts for a cohesive, modern look suited to contemporary interior schemes.
The workstation is built with durable, commercial-grade materials: desk surfaces use 25mm thick E1-grade melamine-faced particleboard, finished with 2mm impact and water-resistant PVC edge banding. Partition structures use powder-coated aluminum extrusion framing with modular connection brackets, supporting upper slatted acoustic panels and lower fabric-wrapped MDF privacy screens. Each station includes a dedicated mobile pedestal constructed with matching melamine-faced particleboard, fitted with black epoxy-coated steel drawer slides, recessed pulls, and four 360-degree swivel nylon casters, two of which lock to hold the unit in place. Threaded adjustable leveling feet on desk legs compensate for uneven flooring, while integrated aluminum slots along partition frames support hanging accessories like file pockets, monitor arms, and task lighting.
Practical functions are built for daily office use: each mobile pedestal fits fully under its corresponding worksurface, with drawers sized to hold A4 files. An integrated cable management system includes corner-positioned ABS grommets that route power and data cables to a concealed under-desk PVC raceway, eliminating visible wiring clutter. The modular aluminum frame connectors allow users to reposition or expand the cubicle layout over time to adapt to changing team needs.
This workstation is well suited for open-plan corporate staff areas, small team work zones for administrative, finance or customer service teams, flexible startup offices, and multi-site branch office deployments. Its flat-pack packaging, which ships across two cartons per set, supports lower freight costs for bulk, multi-location furnishing projects, and the neutral sage and light wood finish pairs seamlessly with mid-back ergonomic office chairs, desktop monitor arms, and under-desk CPU holders. For procurement planning, note that assembly takes 40 minutes per set, and each worksurface supports a static load of 120kg, with individual pedestal drawers holding 30kg of stored materials. The aluminum partition framing supports up to 10kg of hung accessories, and worksurfaces carry a 2H pencil hardness scratch resistance rating for long-term durability in high-traffic work environments.

2-Person L-Shaped Cubicle Workstation with Partitions and Mobile Pedestals Specifications

供应商与现货