Name: Single-Person L-Shaped Office Cubicle Workstation Desk with Dividers and Storage
Brand: Fanshidun
SKU: MWCDWP

纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1400 × 1200 × 1200 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total product net weight	40 kg
Static worktop uniform load capacity	100 kg
Surface abrasion resistance	2000 cycles
Surface stain and water resistance	Level 5
Recommended maximum seated user weight	110 kg
Commercial product warranty	5 years
Available finish color options	60
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles
Recommended Procurement Warranty	Structure 5 years; hardware 3 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Worktop surface	25mm thick melamine-faced MFC board, PVC edge banding
Storage cabinet panels	18mm thick melamine-faced engineered wood, white and light oak finish
Privacy divider frame	White powder-coated rectangular steel tubing
Privacy divider infill panels	Beige fabric over fiberboard core, sound-dampening
Support legs	Black powder-coated tapered steel legs, floor protection glides
Drawer slides	Cold-rolled steel 3-section silent ball-bearing slides
Drawer lock	Zinc alloy cam lock with 2 keys
Cable grommets	ABS plastic round desk grommets with brush insert
Frame finish coating	Epoxy polyester powder coat, scratch-resistant
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Privacy partition design	3-sided low dividers separating adjacent workstations, seated eye-level screening
Storage configuration	Under-main-top pedestal with 1 lockable upper drawer and 1 lower door cabinet, plus side return full-height cabinet
Cable management	2 worktop cable grommets routing power/data cords from surface to under-desk area
Modular assembly	Knock-down flat-pack construction allowing connection to adjacent workstations for cluster layouts
Drawer operation	Full-extension ball-bearing slides allowing 100% drawer access, soft-close damping
Storage compartment access	Hinged lower cabinet door with magnetic catch, open access without protruding handles
Floor leveling	Adjustable glides on support legs compensating for 10mm of uneven floor height
Customization compatibility	Pre-drilled mounting points for optional keyboard trays, CPU holders, and monitor arms
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open-plan office work areas	Individual seated work zone for general administrative and clerical staff, with visual privacy from dividers
Small business and startup offices	Modular design allowing cluster arrangement to fit compact open floor plans without major construction
Shared coworking spaces	Defined individual workstations separated by dividers to reduce cross-user distraction
Call center and customer service floors	High-density cubicle layouts with integrated storage for personal work materials
Government and corporate back-office areas	Durable commercial-grade construction suited for 8-hour daily long-term use
Home office dedicated work zones	Compact L-shaped layout providing separate work and storage surfaces for telecommuting use

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-1:2011	Office worktables - Part 1: Dimensions, applicable to work surface height and clearance verification
EN 527-2:2016	Office worktables - Part 2: Mechanical safety requirements, applicable to stability and load testing
EN 1335-1:2020	Office furniture - Office work chairs, applicable to compatibility with seated workstation dimensions

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.5 办公桌及桌类产品

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to worktop and cabinet panel quality
GB/T 3327-2016	Office desk performance test methods, applicable to load and stability verification
GB 18584-2001	Indoor decorating and refurbishing materials - limit of harmful substances in wood furniture, applicable to formaldehyde emission checks
GB/T 10357.1-2013	Furniture mechanical performance test for tables, applicable to strength and durability validation

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to worktop and cabinet panel quality；
2. GB/T 3327-2016：Office desk performance test methods, applicable to load and stability verification；
3. GB 18584-2001：Indoor decorating and refurbishing materials - limit of harmful substances in wood furniture, applicable to formaldehyde emission checks；
4. GB/T 10357.1-2013：Furniture mechanical performance test for tables, applicable to strength and durability validation；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CUB-L1412-OAKWHT

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CUB-L1412-OAKWHT

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CUB-L1412-OAKWHT打开导出工具

页面快速操作

发布采购询价

产品描述

The Fanshidun model CUB-L1412-OAKWHT is a single-person L-shaped office cubicle workstation desk with integrated dividers and storage, designed to deliver balanced privacy, utility, and flexible layout compatibility for commercial and home work environments. Visually, the unit pairs a clean white and light oak finish with warm beige fabric divider infills and tapered black support legs, creating a professional, understated aesthetic that complements a wide range of office interiors. Its 3-sided low privacy dividers deliver seated eye-level screening to separate adjacent work zones, while the L-shaped layout splits usable surface area into a main worktop and side return to clearly delineate task and storage spaces. The desk is constructed for consistent heavy-use performance. Primary load-bearing components are built with 40mm thick particleboard core, with a 25mm melamine-faced MFC worktop finished with PVC edge banding. Storage cabinet panels use 18mm melamine-faced engineered wood; divider frames are made from white powder-coated rectangular steel tubing, paired with beige fabric-over-fiberboard infill panels that provide sound dampening. Support legs feature a black scratch-resistant epoxy polyester powder coat, fitted with floor protection glides. Drawers operate on cold-rolled steel 3-section silent ball-bearing slides with 100% full extension and soft-close damping, secured by a zinc alloy cam lock with two included keys. Round ABS plastic cable grommets with brush inserts sit on the worktop for neat cord routing, and all hardware is engineered with a 5mm operating clearance for smooth function. The worktop supports a 100kg uniform static load, with a surface rated for Level 5 stain and water resistance and 2000 cycles of abrasion resistance. Practical features include an under-main-top pedestal with one lockable upper drawer and one lower door cabinet with magnetic catch, plus a side return full-height cabinet for generous integrated storage. Adjustable leg glides compensate for uneven floor height, and the knock-down flat-pack design supports connection to matching units for clustered cubicle layouts. The unit is suited for open-plan office administrative zones, compact startup and small business floors, shared coworking spaces, high-density call center floors, long-term government and corporate back-office use, and dedicated home office work zones for telecommuters. It supports a maximum seated user weight of 110kg, comes with a 5-year commercial warranty, and offers 60 available finish options. For procurement, note each unit ships in 2 cartons, requires 40 minutes of assembly per set, has a packaged volume of 0.8 cubic meters and packaged gross weight of 120kg, and the modular design allows seamless scaling of workstation clusters as operational needs evolve.

Single-Person L-Shaped Office Cubicle Workstation Desk with Dividers and Storage Specifications

供应商与现货