纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2800 × 2800 × 1200 mm
Overall footprint	2800 x 2800 x 1200 mm
Single L-shaped work surface per seat	1400 x 1200 mm
Work surface height above floor	750 mm
Total partition height from floor	1200 mm
Solid lower partition height	750 mm
Translucent upper partition height	450 mm
Work surface panel thickness	25 mm
Storage cabinet/drawer panel thickness	17 mm
Knee clearance height under desk	620 mm
Partition panel total thickness	32 mm
Per-seat drawer unit width	400 mm
Aluminum partition frame wall thickness	1.2 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Single work surface static load capacity	150 kg
Overall product net weight	280 kg
Recommended maximum user weight per seat	120 kg
Surface wear resistance rating	2000 cycles
Panel static bending strength	45 MPa
Formaldehyde emission level	0.015 mg/m³
Edge bond strength	1.5 MPa
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles
Recommended Procurement Warranty	Structure 5 years; hardware 3 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Work surface	25mm E1 grade melamine-faced particleboard, scratch/heat/water resistant
Lower partition panels	17mm dark grey melamine-faced particleboard, solid modesty panel
Upper partition inserts	Frosted ribbed translucent acrylic/glass panel, horizontal striped texture
Partition frame	30-series anodized aluminum profile, powder coated dark bronze finish
Edge banding	1.5mm thick PVC edge banding, matching surface color
Storage drawer/cabinet fronts	17mm light grey melamine-faced particleboard, recessed integrated handles
Cabinet carcass and modesty panels	17mm dark grey melamine-faced particleboard, structural support
Drawer slides	Cold-rolled steel full-extension ball bearing slides, zinc plated
Adjustable foot glides	Nylon base with steel threaded stem, 10mm height adjustment
Cable grommets	ABS plastic round cable ports, 60mm diameter, positioned at desk inner corner
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seated privacy screen	1200mm total height cross partition blocks direct line of sight between adjacent users
Per-seat integrated storage	1 pull-out drawer + 1 hinged door cabinet per position for personal/file storage
Cable management access	Recessed cable grommets at inner work corner route power/data wires under desk
Curved knee cutout	Concave rounded front desk edge creates ergonomic seated leg clearance at each position
Floor leveling adjustment	Threaded nylon glides at cabinet base allow 10mm height adjustment for uneven floors
Modular assembly	Knock-down panel connection allows reconfiguration of layout or replacement of individual panels
Surface maintenance	Smooth melamine surface can be wiped clean with standard office cleaning agents, no sealing required
Storage lock compatibility	Drawer and cabinet doors pre-drilled to accept optional cam locks for personal security
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open plan office areas	Creates 4 individual semi-private workstations without full wall construction, suitable for 4 staff members
Small business team work zones	Integrated storage removes need for separate filing cabinets, saves floor space in compact offices
Call center and administrative departments	Partition height balances visual privacy and team communication for daily task work
Startup and co-working spaces	Modular design supports easy reconfiguration as team size or layout needs change
Government and enterprise staff offices	Meets standard commercial furniture durability and emission requirements for long-term daily use
Recruitment and student service offices	Per-seat storage allows staff to keep documents and personal items organized at their workstation

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-1:2011	Office work tables safety and strength requirements for commercial work surfaces
EN 14073-2:2004	Storage furniture safety requirements for office drawers and cabinets
EN 13722:2004	Performance requirements for office workstation partitions and screens

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.5-2021	Desk products standard for load, durability and stability testing of work surfaces
ANSI/BIFMA X5.9-2019	Storage units standard for drawer operation and load capacity testing
ANSI/BIFMA X7.1-2020	Formaldehyde emission standard for low-emitting office furniture components

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applies to panel construction and dimensional tolerances
GB 18580-2017	Formaldehyde emission limits for wood-based panels, requires E1 grade for indoor office use
GB/T 4897.3-2015	Requirements for particleboard used in furniture construction, applicable to desk and cabinet panels

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applies to panel construction and dimensional tolerances；
2. GB 18580-2017：Formaldehyde emission limits for wood-based panels, requires E1 grade for indoor office use；
3. GB/T 4897.3-2015：Requirements for particleboard used in furniture construction, applicable to desk and cabinet panels；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · WS-CUB-4P-X-FROST-STG

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · WS-CUB-4P-X-FROST-STG

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · WS-CUB-4P-X-FROST-STG打开导出工具

页面快速操作

发布采购询价

产品描述

This 4-Person Cross Partition Office Cubicle Workstation with Integrated Storage features a balanced X-shaped cross partition layout that divides a single footprint into four identical individual L-shaped work zones, finished in a coordinated two-tone modern aesthetic. The structure rises to a total partition height that blocks direct seated line of sight between adjacent users, with solid dark grey lower panels paired with frosted ribbed translucent upper panels framed in dark bronze powder-coated anodized aluminum. Each work surface sits at a standard seated working height, with a curved concave front edge that provides comfortable ergonomic leg clearance, and matching color PVC edge banding that delivers a smooth, finished appearance across all panel edges.
Constructed for consistent daily commercial use, the workstation uses 25mm thick E1 grade melamine-faced particleboard for work surfaces, formulated to resist scratches, heat, and moisture, while storage components, lower partition panels, and cabinet carcasses use 17mm thick melamine-faced particleboard for structural rigidity. Storage fronts feature recessed integrated handles in a light grey finish, mounted on cold-rolled steel full-extension ball bearing slides for smooth drawer operation. Nylon adjustable foot glides with steel threaded stems accommodate minor floor unevenness, and all melamine surfaces wipe clean easily with standard office cleaning products without additional sealing.
Each of the four seats includes dedicated integrated storage, with one pull-out drawer and one hinged-door cabinet per position to hold personal items and work files, eliminating the need for separate freestanding storage units in tight layouts. Recessed cable grommets at the inner corner of each work surface route power and data cords neatly below the desk surface, while the knock-down modular assembly design supports straightforward layout reconfiguration or individual panel replacement as needs evolve.
This workstation suits a wide range of commercial spaces, including open plan office areas, small business team zones, call centers, administrative departments, startup offices, co-working spaces, government and enterprise staff areas, as well as recruitment and student service offices. Its partition height balances visual privacy for focused work with ease of casual team communication, and its compact footprint makes efficient use of available floor space.
For procurement planning, note the product ships unbranded in two cartons per set, with a straightforward assembly process. The design meets standard commercial durability and low emission requirements for long-term daily use, with load ratings aligned to regular office work demands, making it a practical choice for teams seeking a semi-private, space-efficient shared work solution.

4-Person Cross Partition Office Cubicle Workstation with Integrated Storage Specifications

供应商与现货