纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2400 × 1200 × 1100 mm
Overall footprint	2400 x 1200 x 1100 mm
Work surface height	750 mm
Single user main worktop size	1200 x 600 mm
Single user return worktop size	1000 x 450 mm
Privacy divider height above worktop	350 mm
Partition panel thickness	32 mm
Under-desk seated knee clearance height	670 mm
Knee clearance width per user	600 mm
Cable grommet diameter	60 mm
Mobile 3-drawer pedestal size	400 x 500 x 600 mm
Worktop panel thickness	25 mm
PVC edge banding thickness	2 mm
Modesty panel height	450 mm
Support leg square section size	45 x 45 mm
Finished Top Thickness	50 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total unit net weight	140 kg
Work surface static load capacity	100 kg
Drawer slide operational cycle life	50000 cycles
Hinge operational cycle life	80000 cycles
Work surface abrasion resistance	2000 cycles
Recommended maximum user weight per station	120 kg
Warranty period	5 years
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Worktop core	E1 grade particleboard (MFC)
Worktop finish	Thermally fused light off-white melamine
Edge treatment	2mm thick PVC edge banding
Structural framing	1.2mm thick powder-coated black steel
Upper privacy divider	Perforated off-white acrylic/polycarbonate panel
Lower modesty panel	Dark blue fabric-covered particleboard
Drawer pedestal body	18mm thick melamine-faced MDF
Drawer slides	Full-extension cold-rolled steel ball-bearing slides
Pedestal casters	50mm diameter twin-wheel nylon casters
Desk leveling feet	15mm diameter adjustable nylon glides
Cable grommets	ABS plastic round desk grommets
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Workstation layout	Two opposite-facing L-shaped work zones separated by central dividers
Privacy separation	350mm high perforated dividers block direct line of sight between users
Storage configuration	One 3-drawer mobile pedestal per user, located under return worktop
Pedestal mobility	Four twin-wheel casters per pedestal, two with brake locks
Cable management	Round 60mm grommets on each main worktop connect to under-desk raceway
Floor leveling	Adjustable glides on all desk support legs compensate for uneven floor surfaces
Modular assembly	Knock-down panelized design allows reconfiguration of workstation layout
Drawer operation	Full-extension ball-bearing slides allow full access to drawer contents
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	Main top 2500× 1050× 350 mm; return/pedestal packed separately
Reference Packaged Gross Weight	180 kg/set in 4 cartons
Reference Packaging Volume	1 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open plan office spaces	Provides individual work zones for two staff in low-divider open office layouts
Small business admin areas	Compact footprint fits small offices needing two dedicated work positions
Start-up collaborative offices	Balances individual work space with low dividers that support easy communication
Call center or back-office work areas	Standard ergonomic height supports long-duration seated computer work
Temporary or project office setups	Modular knock-down design allows fast deployment and reconfiguration
Recommended paired seating	Standard mid-back swivel task chairs with 5-star base and adjustable height

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-1:2011	Office work tables: dimensional safety and strength requirements
EN 527-2:2019	Office work tables: mechanical safety and structural durability requirements
EN 1335-1:2020	Office work seating (for paired task chairs): dimensional ergonomic requirements
EN 15372:2008	Office furniture: storage units, strength and durability requirements for pedestals

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.5-2021	Office products: desks, performance and safety testing standard
ANSI/BIFMA X5.9-2019	Office products: storage units, performance and safety testing for pedestals
ANSI/BIFMA X5.1-2017	Office chairs (for paired task chairs): general purpose office chair safety standard

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to worktop and panel construction
GB/T 3327-2019	Office furniture: desks, applicable to dimensional and performance requirements for work surfaces
GB 18584-2001	Indoor decorating and refurbishing materials: limit of harmful substances in wood furniture
GB/T 10357.1-2013	Furniture mechanical performance test for tables: strength and durability assessment

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to worktop and panel construction；
2. GB/T 3327-2019：Office furniture: desks, applicable to dimensional and performance requirements for work surfaces；
3. GB 18584-2001：Indoor decorating and refurbishing materials: limit of harmful substances in wood furniture；
4. GB/T 10357.1-2013：Furniture mechanical performance test for tables: strength and durability assessment；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · WS-2P-L1200-BW

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · WS-2P-L1200-BW

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · WS-2P-L1200-BW打开导出工具

页面快速操作

发布采购询价

产品描述

This 2-person opposite-facing L-shaped modular office workstation, model WS-2P-L1200-BW, is an unbranded public office furniture solution designed to balance individual privacy and collaborative access in shared work environments. It features a clean blue-and-white finish, with two mirrored L-shaped work zones positioned opposite one another across a central low divider, creating a compact, cohesive layout that accommodates two users without wasting floor space. The overall unit measures 2400 x 1200 x 1100 mm, with a standard ergonomic work surface height of 750 mm; privacy dividers sit 350 mm above the worktop, high enough to block direct line of sight between seated users while remaining low enough to support easy, natural conversation across the station. Each user has access to a 1200 x 600 mm main worktop and a 1000 x 450 mm return worktop, with 670 mm of under-desk knee clearance height and 600 mm of knee clearance width per position for comfortable seated use. The unit is constructed for durable daily use, with thermally fused light off-white melamine worktops built on an E1 grade particleboard core, sealed with 2mm thick PVC edge banding to resist impact damage. Structural support comes from 1.2mm thick powder-coated black steel framing, with a perforated off-white acrylic/polycarbonate upper privacy divider and dark blue fabric-covered lower modesty panel. Each user is allocated one 3-drawer mobile pedestal, constructed from 18mm thick melamine-faced MDF, fitted with full-extension cold-rolled steel ball-bearing slides rated for 50,000 operational cycles, and mounted on 50mm diameter twin-wheel nylon casters, two of which include brake locks to hold the pedestal in place under the return worktop. Each main worktop includes a 60mm round cable grommet that routes wiring to an under-desk raceway to keep work surfaces uncluttered, and all support legs are fitted with adjustable glides to compensate for uneven floor surfaces. The knock-down panelized modular design supports layout reconfiguration as team needs shift, with a rated work surface static load capacity of 100 kg, 2000 cycles of abrasion resistance for work surfaces, hinges rated for 80,000 operational cycles, and a recommended maximum user weight of 120 kg per station. The workstation is suitable for open plan office spaces, small business admin areas, start-up collaborative offices, call center and back-office work areas, and temporary or project office setups, pairing optimally with standard mid-back swivel task chairs with 5-star bases and adjustable height. For procurement, note that each set ships with a packaged gross weight of 180 kg across multiple cartons with a total packaging volume of 1 cubic meter, requires 40 minutes of assembly time per set, and is covered by a 5-year warranty.

2-Person Opposite-Facing L-Shaped Modular Office Workstation with Low Dividers and 3-Drawer Pedestals Specifications

供应商与现货