Name: Single-Seat L-Shaped Office Cubicle Workstation with Frosted Glass Fabric Dividers and 2-Drawer Pedestal
Brand: aibi furniture
SKU: R08X5P

纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1550 × 1550 × 1200 mm
Overall footprint	1550 x 1550 x 1200 mm
Work surface height	750 mm
Worktop thickness	25 mm
Partition frame wall thickness	1.2 mm
Upper frosted glass panel thickness	5 mm
Lower fabric partition panel thickness	40 mm
Fixed storage pedestal dimensions	400 x 550 x 725 mm
Knee clearance height under worktop	700 mm
Cable grommet diameter	80 mm
Drawer front height (upper pencil drawer)	150 mm
Drawer front height (lower file drawer)	300 mm
Edge banding thickness	2 mm
Adjustable foot height adjustment range	15 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Worktop uniform static load capacity	80 kg
Drawer slide open/close cycle rating	50000 cycles
Frosted glass panel light transmittance	50%
Surface scratch resistance rating	2000 cycles
Maximum recommended seated user weight	136 kg
Formaldehyde emission limit	0.124 mg/m³
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles
Recommended Procurement Warranty	Structure 5 years; hardware 3 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Work surface	25mm melamine-faced MFC panel, light oak finish, 2mm PVC edge banding
Partition frame	1.2mm thick extruded aluminum alloy, white powder-coated finish
Upper partition panel	5mm frosted tempered safety glass, anti-glare finish
Lower partition panel	40mm thick fabric-wrapped acoustic panel, neutral grey finish
Pedestal cabinet body	18mm melamine-faced particleboard, matte white finish
Drawer slides	3-section full-extension silent steel ball-bearing slides
Drawer handles	Brushed aluminum alloy pull handles, 128mm hole spacing
Cable management grommet	ABS plastic round cable port with brush seal
Leveling feet	Nylon base adjustable glides, steel threaded stem
Rear modesty panel	18mm grey melamine panel with integrated cable pass-through cutouts
Drawer lock	Zinc alloy centralized cylinder lock, keyed alike
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Storage configuration	Right-side fixed pedestal with 1 shallow pencil drawer and 1 deep hanging file drawer
Drawer lock function	Single key lock secures both drawers for personal storage security
Cable management	Corner desktop grommet plus rear modesty panel cutouts route power/data cables off work surface
Privacy partition function	430mm tall lower fabric panel blocks direct sightline to seated workspace, upper frosted glass allows ambient light transmission
Floor leveling	Adjustable nylon feet compensate for ±15mm uneven floor elevation to keep worktop stable
Modular expansion	Aluminum partition frame connects to adjacent matching workstations to form multi-seat cubicle clusters
Knee space access	Curved front worktop cutout provides 700mm clear legroom for ergonomic seated posture
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open-plan office staff zones	Suited for daily administrative, clerical, and data entry work with medium privacy separation
Call center and shared workspace environments	Fabric lower panel reduces cross-staff visual distraction while glass maintains open office feel
Educational and institutional office spaces	Durable commercial-grade construction meets frequent use requirements for school and government offices
Startup and small business open offices	Compact L-shape fits 900mm minimum aisle width requirements for space-efficient layouts
Adjacent multi-seat cluster configuration	Partition frame connects to matching units to build 2-person, 4-person, or larger cubicle banks

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-1:2011	Applicable for safety, strength, and durability requirements for office worktables and desks
EN 1023-2:2000	Applicable for stability testing of office storage pedestals integrated into workstations
EN 13501-1:2007	Applicable for fire reaction classification of fabric and panel components for commercial office use

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.5-2021	Applicable for performance and durability testing of desk products including load and cycle requirements
ANSI/BIFMA X5.9-2019	Applicable for performance testing of storage pedestals and drawer units integrated into workstations

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB 18580-2017	Applicable for formaldehyde emission limits of wood-based panel components used in indoor office furniture
GB/T 3324-2017	Applicable for general technical requirements, dimensional tolerances, and strength testing of wooden office desks
GB/T 35607-2017	Applicable for green product evaluation criteria for office furniture, including material and emission requirements

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB 18580-2017：Applicable for formaldehyde emission limits of wood-based panel components used in indoor office furniture；
2. GB/T 3324-2017：Applicable for general technical requirements, dimensional tolerances, and strength testing of wooden office desks；
3. GB/T 35607-2017：Applicable for green product evaluation criteria for office furniture, including material and emission requirements；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · WS-L1500-CURV-2DR-FG

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · WS-L1500-CURV-2DR-FG

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · WS-L1500-CURV-2DR-FG打开导出工具

页面快速操作

发布采购询价

产品描述

The aibi furniture Single-Seat L-Shaped Office Cubicle Workstation (model WS-L1500-CURV-2DR-FG) delivers a balanced blend of personal workspace privacy, functional storage, and open-plan layout flexibility for commercial and select residential office settings.
Visually, the workstation features a compact L-shaped layout with a curved front worktop cutout for ergonomic leg access. Dividers combine a neutral grey fabric-wrapped lower acoustic panel with an anti-glare frosted tempered safety glass upper panel, paired with a white powder-coated extruded aluminum partition frame. The light oak finish melamine-faced worktop contrasts with the matte white fixed storage pedestal, creating a polished, professional aesthetic that balances enclosure and openness.
Construction uses commercial-grade materials tailored for frequent daily use: the 25mm thick worktop is finished with light oak melamine and edged with 2mm PVC banding, supported by a 1.2mm thick aluminum partition frame. The 40mm thick lower fabric panel supports acoustic softening and sightline blocking, while the 5mm frosted glass upper panel allows diffused light transmission. The fixed pedestal is built from 18mm melamine-faced particleboard, fitted with 3-section full-extension silent steel ball-bearing drawer slides, brushed aluminum pull handles, an ABS round cable grommet with a brush seal, and adjustable nylon leveling feet with steel threaded stems to compensate for uneven flooring.
Core functional features address core office workflow needs: a right-side fixed pedestal holds one shallow pencil drawer and one deep hanging file drawer, secured by a single key lock for personal storage security. Integrated cable management routes power and data cords through the corner desktop grommet and rear modesty panel cutouts to eliminate surface clutter. The lower partition panel blocks direct sightlines to seated work areas to reduce distraction, while the frosted glass upper panel maintains ambient light flow. The modular aluminum frame connects seamlessly to matching units to scale into multi-seat cubicle clusters, and the curved front cutout provides clear knee clearance to support comfortable seated posture.
This workstation is suited for open-plan office staff zones for daily administrative, clerical, and data entry work, as well as call centers and shared workspaces where reduced visual distraction and an open collaborative feel are both required. It also fits educational and institutional office spaces, and startup or small business open offices where its compact footprint supports space-efficient layouts. It can be deployed as a standalone unit or connected to matching workstations to build larger cubicle banks.
For procurement planning, note that each unit ships in 2 cartons, requires 40 minutes of assembly time per set, and includes adjustable leveling feet to accommodate minor floor unevenness. Buyers planning multi-seat configurations should confirm alignment with matching model units to leverage the modular connection system, and account for the required clearance to support accessible aisle navigation around installed workstations.

Single-Seat L-Shaped Office Cubicle Workstation with Frosted Glass Fabric Dividers and 2-Drawer Pedestal Specifications

供应商与现货