纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2800 × 2400 × 1200 mm
Overall unit dimensions (2-person L-layout)	2800 x 2400 x 1200 mm
Work surface height	750 mm
Desktop thickness	25 mm
Primary L-seat work surface span	1400 x 1200 mm
Knee well clearance height	650 mm
Knee well opening width	800 mm
Partition frame profile thickness	83 mm
Lower fabric privacy panel height	900 mm
Upper frosted glass panel height	300 mm
3-drawer pedestal dimensions	400 x 550 x 650 mm
Cable grommet diameter	60 mm
Modesty panel height	450 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Per-seat desktop static load capacity	120 kg
Per-unit user capacity	2 users
Product net weight (per dual station)	180 kg
Frame structural static load	500 kg
Commercial use warranty	10 years
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles
Recommended Procurement Warranty	Structure 5 years; hardware 3 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Work surface	25mm E1-grade melamine-faced MFC with 2mm PVC edge banding
Partition frame	1.5mm thick powder-coated gray aluminum alloy profile
Lower partition panels	Sound-dampening polyester fabric tackable panels over composite core
Upper partition panels	5mm frosted tempered safety glass
Drawer pedestal	0.8mm thick cold-rolled steel with white epoxy powder coating
Modesty panel	18mm thick melamine-faced composite panel with gray finish
Cable management components	ABS plastic grommets and rear raceway covers
Leveling glides	Nylon base with steel threaded adjuster
Drawer hardware	Zinc-plated steel full-extension drawer slides with integrated lock
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Drawer operation	Three lockable drawers with full-extension slides, keyed lock secures all drawers
Cable management	Desktop cable grommet routes cords to rear under-desk raceway with removable access panels
Privacy function	Partial-height panels block seated sightlines while glass upper section allows overhead light penetration
Modular connection	Partition frames connect with bracket hardware to support reconfiguration of workstation layouts
Leveling adjustment	Threaded base glides adjust 15mm to compensate for uneven office flooring
Seating ergonomics	Curved concave desktop edge reduces wrist pressure at primary seating position
Surface durability	Thermally fused melamine finish resists scratches, stains, and heat from standard office equipment
Pedestal storage	Two shallow stationery drawers and one deep hanging file drawer for letter/A4 documents
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open-plan office spaces	Suited for 2-person team work zones in corporate open-plan layouts, balances privacy and collaboration
Call center and administrative offices	Provides dedicated individual work space with integrated storage for daily paperwork and supplies
Small business team areas	Modular design supports easy expansion as team headcount grows without full workspace replacement
Government and public sector offices	Durable commercial construction meets heavy daily use requirements for public-facing work areas
Startup co-working spaces	Neutral white/gray color scheme adapts to flexible short-term and long-term desk rental configurations

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-1:2011	Office worktables safety and strength requirements, applicable to worksurface performance
EN 1335-1:2020	Office furniture seating dimensional guidance, applicable to knee clearance design
EN 1022:2018	Furniture seating stability test method, referenced for workstation adjacent seating layout
EN 13986:2004	Wood-based panels for construction, applicable to MFC panel material specification

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.5-2021	Desk products standard, applicable to worksurface load and durability testing
ANSI/BIFMA X5.9-2019	Storage units standard, applicable to drawer pedestal performance validation
ANSI/BIFMA G1-2013	Ergonomic guidelines for office furniture, applicable to work height and clearance

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to composite desktop and panel components
GB/T 3325-2017	General technical requirements for metal furniture, applicable to steel pedestal and frame components
GB 18580-2017	Formaldehyde emission limits for wood-based panels, required for MFC worksurface materials
GB/T 24821-2009	Office desk performance test methods, applicable to worksurface load and stability validation

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to composite desktop and panel components；
2. GB/T 3325-2017：General technical requirements for metal furniture, applicable to steel pedestal and frame components；
3. GB 18580-2017：Formaldehyde emission limits for wood-based panels, required for MFC worksurface materials；
4. GB/T 24821-2009：Office desk performance test methods, applicable to worksurface load and stability validation；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CUB-L2P-3DRAW-GLSPART

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CUB-L2P-3DRAW-GLSPART

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CUB-L2P-3DRAW-GLSPART打开导出工具

页面快速操作

发布采购询价

产品描述

The Two-Person L-Shaped Office Cubicle Workstation with Integrated 3-Drawer Pedestal (model CUB-L2P-3DRAW-GLSPART) is an unbranded modular open-plan furniture solution designed to balance individual privacy and collaborative access for shared work environments. Its L-shaped layout positions two dedicated workstations at a right-angle configuration, with overall dimensions of 2800 x 2400 x 1200 mm, a 750 mm work surface height, and 25 mm thick desktops. Each primary L-seat work surface spans 1400 x 1200 mm, with 650 mm knee well clearance height and 800 mm knee well opening width to accommodate standard office seating. Partial-height privacy partitions use an 83 mm thick powder-coated gray aluminum frame, pairing 900 mm tall lower sound-dampening polyester fabric tackable panels over a composite core with 5 mm frosted tempered safety glass upper panels; this design blocks seated sightlines between adjacent users while allowing overhead light to filter through the workspace. The frame connects via bracket hardware to support flexible layout reconfiguration, and 18 mm thick gray melamine-faced composite modesty panels shield under-desk areas from view. The work surface is constructed from 25 mm E1-grade melamine-faced MFC with 2 mm PVC edge banding, finished with a thermally fused melamine layer that resists scratches, stains, and heat from standard office equipment; curved concave desktop edges at primary seating positions reduce wrist pressure during extended work sessions. An integrated 3-drawer pedestal is built from 0.8 mm thick cold-rolled steel with a white epoxy powder coating, fitted with zinc-plated steel full-extension drawer slides and a keyed lock that secures all three drawers for private storage of paperwork and office supplies. Additional functional details include ABS plastic desktop cable grommets that route cords to a rear under-desk raceway with removable access panels for tidy wiring, threaded nylon base glides with steel adjusters that adjust 15 mm to compensate for uneven office flooring, and a 10-year commercial use warranty covering durable construction that supports a per-seat desktop static load capacity of 120 kg and 500 kg frame structural static load. The workstation holds a net weight of 180 kg per dual station, ships as one set across two cartons with 0.8 m³ packaging volume and 120 kg packaged gross weight, and requires 40 minutes of assembly time per set. It is suited for 2-person team work zones in corporate open-plan offices, call center and administrative spaces requiring dedicated individual work areas with integrated storage, small business team areas that need easy modular expansion as headcount grows, government and public sector offices with heavy daily use demands, and startup co-working spaces where its neutral white and gray color scheme adapts to both short-term and long-term flexible desk rental configurations. When procuring, teams should account for required assembly time, modular expansion compatibility with additional matching units, and the unit’s fixed two-user capacity to align with space planning and team growth projections.

Two-Person L-Shaped Office Cubicle Workstation with Integrated 3-Drawer Pedestal Specifications

供应商与现货