纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	4200 × 4200 × 1200 mm
Overall cluster footprint	4200 x 4200 x 1200 mm
Single L-seat main worktop size	1400 x 600 mm
Single L-seat side return worktop size	1200 x 400 mm
Worktop height from floor	750 mm
Privacy partition total height	1200 mm
Curved knee opening clearance width	700 mm
Under-desk knee clearance height	680 mm
Worktop thickness	25 mm
PVC edge banding thickness	3 mm
Partition panel thickness	50 mm
Under-desk storage pedestal size	400 x 500 x 650 mm
Top storage shelf depth per seat	300 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total set net weight (reference)	420 kg
Single worktop static load capacity	150 kg
Recommended maximum user weight per seat	120 kg
Worktop surface abrasion resistance	2000 cycles
Available finish color count	60
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles
Recommended Procurement Warranty	Structure 5 years; hardware 3 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Worktop panels	E1 grade melamine-faced particleboard, scratch/stain/water resistant
Partition frames	6063-T5 aluminum alloy extrusions with powder-coated bronze finish
Lower partition panels	Fabric-wrapped high-density particleboard, dark grey finish
Upper partition trim	Horizontal slatted frosted acrylic semi-transparent panels
Desk support panels	18mm thick melamine-faced particleboard, dark grey finish
Edge banding	3mm thick high-impact PVC, matching worktop light grey color
Hardware connectors	Zinc-plated steel knockdown (KD) cam lock fittings
Adjustable glides	Nylon base with steel threaded stem, 15mm adjustment range
Pedestal drawer slides	Full-extension cold-rolled steel ball-bearing slides
Pedestal door handle	Matte silver aluminum alloy recessed pull
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seated work position	6 individual L-shaped workstations facing cross cluster center
Privacy separation	1200mm tall partitions block line of sight between adjacent seated users
Cable management	Recessed cable grommets on each main worktop surface for power/data routing
Integrated storage	1 drawer + 1 door cabinet pedestal per selected workstation for files/supplies
Rear shelf storage	Raised side shelf behind each partition for books, files or document trays
Floor leveling	Threaded adjustable glides compensate for uneven floor surfaces up to 15mm
Modular reconfiguration	Knockdown connecting hardware allows layout changes or seat count adjustment
Knee access	Curved concave front worktop edge provides ergonomic leg entry for seated users
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open plan office areas	Provides individual private workspaces in open office floors for staff teams
Call center operations	6-seat cluster layout supports high-density agent seating with individual work surfaces
Startup and small business offices	Compact cross layout maximizes seat count without requiring separate private offices
Administrative and clerical work zones	Integrated storage and cable management support daily paperwork and computer tasks
Training or temporary project teams	Modular construction allows easy reconfiguration for temporary project assignments
Government and corporate back-office areas	Durable commercial construction withstands high daily use in shared work environments

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-1:2011	Office work tables: safety and strength requirements, applies to worktop load and stability
EN 527-2:2016	Office work tables: dimensional requirements for seated office work
EN 1335-1:2020	Office work chair dimensional coordination, applies to knee clearance dimensions
EN 1022:2018	Domestic and contract furniture: seating strength and stability for chair compatibility

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.5-2021	Desk products: safety, durability and structural performance requirements
ANSI/BIFMA X5.9-2019	Storage units: performance requirements for integrated pedestals and shelves
ANSI/BIFMA M7.1-2020	Furniture emissions: VOC and formaldehyde testing for low-emission office furniture

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applies to desk panel and storage components
GB/T 3327-2019	Office furniture: desks and tables, applies to worktop height, load and stability requirements
GB 18580-2017	Formaldehyde emission limits for wood-based panels, applies to MFC/MDF components
GB/T 35607-2017	Green product assessment for furniture, applies to low-emission material selection

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applies to desk panel and storage components；
2. GB/T 3327-2019：Office furniture: desks and tables, applies to worktop height, load and stability requirements；
3. GB 18580-2017：Formaldehyde emission limits for wood-based panels, applies to MFC/MDF components；
4. GB/T 35607-2017：Green product assessment for furniture, applies to low-emission material selection；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · WS-CR6-L1400

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · WS-CR6-L1400

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · WS-CR6-L1400打开导出工具

页面快速操作

发布采购询价

产品描述

This 6-person cross-shaped modular office cubicle workstation features a structured cross-cluster layout that arranges six individual L-shaped workstations to face the cluster center, creating defined personal work zones within a compact footprint. Each workstation includes a main worktop and a shorter side return worktop, paired with partitions that reach a height that blocks direct line of sight between adjacent seated users to support focused work. The upper partition section incorporates horizontal slatted frosted acrylic semi-transparent trim, while lower panels are finished in dark grey fabric wrapping, paired with powder-coated bronze aluminum alloy frames for a polished, professional aesthetic that balances privacy and open visual flow across the space.
Worktops are constructed from E1 grade melamine-faced particleboard, treated to resist scratches, stains, and water exposure, finished with 3mm thick high-impact PVC edge banding matched to the light grey worktop tone. The structure is reinforced with steel support frames, and uses zinc-plated steel knockdown cam lock fittings for secure connections. Each seat includes an integrated under-desk pedestal with one drawer and one door cabinet for storing files and office supplies, plus a raised rear shelf behind the partition for books, document trays, or frequently referenced materials. Recessed cable grommets on each main worktop route power and data cords neatly, while nylon adjustable glides with steel threaded stems compensate for uneven floor surfaces. The modular knockdown design allows users to adjust layouts or seat counts to suit evolving space needs, and full-extension cold-rolled steel ball-bearing slides support smooth operation of storage drawers.
This workstation is well suited for open plan office areas where teams need separated workspaces without full wall enclosures, high-density call center seating, startup and small business offices seeking to maximize usable seat count, administrative and clerical work zones handling daily paperwork and computer tasks, temporary training or project team spaces, and government or corporate back-office environments with consistent high daily use.
For procurement, note the product is unbranded, with 60 available finish colors to align with existing interior design schemes. The knockdown construction ships in cartons per set, with on-site assembly required, and the design supports future reconfiguration to adapt to changing team sizes or space layouts. Buyers should account for required cluster clearance to ensure comfortable user access and movement around the installation, and match finish selections to adjacent office furniture for cohesive visual design across the workspace.

6-Person Cross-Shaped Modular Office Cubicle Workstation with L-Shaped Desks and Under-Desk Storage Specifications

供应商与现货