The Two-Tone Wraparound Upholstered Lounge Armchair, model LC-WT-820, is an unbranded modern seating piece defined by its cohesive, streamlined silhouette. Its two-tone design pairs light grey woven upholstery across all inner seating surfaces with a dark, smooth matte hard outer back shell, creating understated visual contrast. The chair sits on dark stained, tapered splayed solid wood legs, with integrated wraparound back and armrests that form a gently enclosed, inviting profile. Overall assembled dimensions measure 820 x 840 x 890 mm, with a seat positioned 460 mm from the floor, 180 mm tall integrated armrests above the seat, and a 430 mm tall backrest above the seat surface. Construction balances durability and comfort: an internal frame built from 18mm thick plywood and solid wood joinery supports a 14 mm bent plywood internal seat support board. Seating surfaces are padded with high-density polyurethane foam wrapped in 20g polyester wadding, topped with a 0.8mm thick woven polyester-linen blend fabric held in place with 8 stitches per inch reinforced stitching. The fabric delivers 30000 Martindale cycles of abrasion resistance, while legs are finished with scratch-resistant matte dark lacquer and fitted with plastic glides to prevent floor damage. The fixed static design features a 105 degree relaxed back angle, with no swivel, tilt, lift or height adjustment mechanisms, and supports a recommended static load capacity of 150 kg, with a frame static load rating of 300 kg. This armchair suits a range of spaces: it works as standalone accent seating beside sofas in residential living rooms, as a reading chair in master or guest bedrooms, and as seating for hotel lobbies, office reception zones, and breakout areas. It can be deployed in pairs flanking a coffee table for conversation setups, and pairs well with 600 mm tall round or oval side tables for convenient drink placement. Procurement teams should note the chair ships knock-down in two cartons per set, with legs attaching to the pre-installed seat frame using included hardware; assembly time is 40 minutes per set, with a packaged gross weight of 23 kg per set. Upholstery requires spot cleaning with mild detergent, while the outer shell wipes clean with a damp cloth. At 85% space utilization, 135 sets fit in a 20GP shipping container for large-scale orders.