基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源:工厂资料结构化字段,最终以实测值为准
| 产品外部尺寸(宽 × 深 × 高) | 700 × 700 × 760 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Central support column diameter | 76 mm | |
| Cross base total spread | 680 mm | |
| Base foot width | 80 mm | |
| Undertable knee clearance height | 720 mm | |
| Tabletop edge overhang from column | 312 mm | |
| Base foot height from ground | 30 mm | |
| Tabletop drainage groove width | 8 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源:产品性能数据,采购前请核对具体测试口径
| Net product weight | 15 kg | |
|---|---|---|
| Static tabletop uniform load capacity | 100 kg | |
| Recommended seating capacity | 2 people | |
| Outdoor weather durability rating | 5 years | |
| Surface stain resistance | Grade 5 | |
| Base slip resistance static coefficient | 0.6 | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源:以工厂材质清单与验货报告为准
| Tabletop | Matte white weather-resistant HDPE resin with integrated parallel drainage grooves | |
|---|---|---|
| Central support column | Powder-coated white aluminum alloy tube | |
| 4-prong cross base | Die-cast aluminum with matte white powder coat finish | |
| Base foot pads | Black non-slip rubber pads attached to each foot end | |
| Tabletop edge trim | Smooth rounded integrated resin edge | |
| Hardware fasteners | Stainless steel assembly bolts | |
| Surface coating | UV-stabilized matte polyester powder coat | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源:功能配置参数,以供应商正式规格为准
| Tabletop drainage | Integrated parallel surface grooves direct rainwater off tabletop to eliminate pooling | |
|---|---|---|
| Stable freestanding placement | 4-prong cross base distributes weight evenly to prevent tipping on level paved surfaces | |
| Unobstructed leg room | Single central pedestal eliminates corner legs, allowing full 360-degree leg access for seated users | |
| Tool-enabled assembly | Knock-down design connects tabletop, column and base with included hardware for on-site setup | |
| Surface maintenance | Non-porous smooth surface wipes clean with mild soap and water, no sealing or painting required | |
| Leveling compatibility | Base foot pads accommodate minor surface unevenness without separate adjustment glides | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源:外贸报价与装柜测算参考
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源:依据产品结构与品类整理的推荐应用场景
| Commercial outdoor cafe seating | Pairs with two bistro chairs for sidewalk coffee shop or restaurant patio dining | |
|---|---|---|
| Residential patio/balcony use | Compact footprint fits small residential balconies, terraces or backyard patio spaces | |
| Poolside leisure placement | Weatherproof construction resists water splashes and humidity for poolside seating areas | |
| Temporary event setup | Lightweight knock-down design suits pop-up markets, outdoor events and catering setups | |
| Break area outdoor seating | Appropriate for office outdoor break zones or staff courtyard dining areas |
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
| EN 581-1:2017 | Outdoor furniture seating and table safety requirements for general public use | |
|---|---|---|
| EN 581-3:2017 | Mechanical safety and structural performance test methods for outdoor tables | |
| EN 1022:2018 | Domestic and contract furniture stability test methods for freestanding tables |
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for resin-composite outdoor table structural stability testing | |
|---|---|---|
| GB/T 4893.8-2013 | Surface wear resistance test method for furniture finishes, applicable for tabletop durability validation | |
| GB/T 17657-2013 | Test methods for evaluating physical and chemical properties of wood-based panels, applicable for resin tabletop material performance |
本产品须满足以下技术参数要求: 1. GB/T 3324-2017:General technical requirements for wooden furniture, applicable for resin-composite outdoor table structural stability testing; 2. GB/T 4893.8-2013:Surface wear resistance test method for furniture finishes, applicable for tabletop durability validation; 3. GB/T 17657-2013:Test methods for evaluating physical and chemical properties of wood-based panels, applicable for resin tabletop material performance; 最终交付参数、检测报告和验收标准以双方采购合同为准。
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告,可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块,文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段,可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具