纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2300 × 1200 × 720 mm
Tabletop tile thickness	12 mm
Cast aluminum frame wall thickness	4 mm
Central recessed cavity dimensions	800 x 400 x 120 mm
Cabriole leg foot spread	680 mm
Apron clearance under tabletop edge	650 mm
Decorative lattice apron height	150 mm
Removable metal cover thickness	3 mm
Circular insert ring diameter	280 mm
Tabletop outer border width	120 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Distributed tabletop static load capacity	136 kg
Gas fire pit maximum heat output	55000 BTU
Product net weight	90 kg
Seating capacity	8 people
Powder coat finish UV durability	5 years outdoor exposure
Frame static load per leg	120 kg
Ice bucket insert liquid capacity	30 L
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Structural frame and legs	Sand-cast aluminum with dark bronze powder-coated finish
Tabletop surface	Glazed ceramic tile with terracotta/beige/dark brown geometric lattice pattern
Tabletop edge trim	Extruded aluminum with bronze brushed finish
Lower decorative apron	Cast aluminum openwork scroll/heart lattice pattern
Central recessed cavity liner	Black powder-coated stamped steel
Removable cavity cover	Black stamped steel with geometric embossed pattern, two round bronze pull knobs
Leg foot pads	Non-slip molded rubber glides
Fastener hardware	Stainless steel assembly bolts and brackets
Central circular insert ring	Black steel ring for burner/ice bucket alignment
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Dual-function central cavity	Accepts gas fire burner, charcoal grill, or insulated ice bucket insert
Removable flush-fit cover	Lifts via two integrated knobs to create flat dining surface when not using fire/ice
Four-point curved leg support	Cabriole-style splayed legs provide stable lateral support on uneven outdoor surfaces
Openwork lattice apron	Decorative structural support that allows air circulation for fire feature and reduces wind resistance
Convertible utility cavity	Hidden compartment can store propane tank connector, grill grates, or ice liner when not in use
All-weather operation	Rust-proof frame and frost-resistant tile withstand rain, sun, and freezing temperatures
Leveling foot adjustment	Small adjustable glides at each leg foot compensate for uneven concrete or stone patios
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential patio dining	Suitable for backyard, villa terrace, or garden outdoor dining for up to 8 guests
Commercial outdoor hospitality	Ideal for restaurant sidewalk patios, resort poolside dining areas, or rooftop bars
Seasonal multi-function use	Converts between standard dining table, outdoor heating fire pit, and beverage cooling ice bucket for parties
Hard surface placement	Designed for concrete, stone paver, tile, or wood deck patio surfaces
Coordinate with cast aluminum patio chairs	Pairs with matching bronze-finish cast aluminum sling or cushioned outdoor dining chairs

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 581-1:2017	Applicable for safety requirements for outdoor seating and tables for domestic use
EN 581-2:2019	Applicable for mechanical safety and strength test methods for outdoor tables
EN 1022:2019	Applicable for stability testing of domestic and contract outdoor dining tables

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X7.1-2021	Applicable for durability and safety of outdoor contract furniture
ANSI/BIFMA X5.5-2021	Applicable for desk/table strength and load testing requirements

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB 28481-2012	Applicable for restricted hazardous substances in plastic and metal outdoor furniture
GB/T 3324-2017	Applicable for general technical requirements for metal furniture
GB/T 17657-2013	Applicable for surface finish wear and weather resistance testing of furniture surfaces

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB 28481-2012：Applicable for restricted hazardous substances in plastic and metal outdoor furniture；
2. GB/T 3324-2017：Applicable for general technical requirements for metal furniture；
3. GB/T 17657-2013：Applicable for surface finish wear and weather resistance testing of furniture surfaces；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OD-FDT-CAB-TILE-2300

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OD-FDT-CAB-TILE-2300

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OD-FDT-CAB-TILE-2300打开导出工具

页面快速操作

发布采购询价

产品描述

This rectangular outdoor dining table with integrated recessed fire pit and ice bucket cavity blends ornate decorative styling with versatile multi-season outdoor utility, built in a standard dining height suited to relaxed gathering spaces. Visually, the design features elegant cabriole-style splayed legs, a 150mm tall decorative openwork apron cast with scroll and heart lattice motifs, and a glazed ceramic tile tabletop finished in a terracotta, beige, and dark brown geometric lattice pattern, framed by bronze brushed extruded aluminum edge trim. The central cavity is fitted with a flush removable steel cover embossed to match the tabletop pattern, fitted with two round bronze pull knobs that sit flush with the tile surface when the cavity is not in use. The 2300 x 1200 x 720 mm table is constructed with a 4mm thick sand-cast aluminum frame finished in dark bronze powder coating that delivers 5 years of UV durability under outdoor exposure, supporting a 12mm thick ceramic tiled top and a black powder-coated stamped steel central cavity insert. Stainless steel assembly bolts and brackets secure all structural joints, while non-slip molded rubber glides with built-in leveling adjustment cap each leg, compensating for uneven hard patio surfaces. The open lattice apron provides structural rigidity while enabling air circulation for fire features and reducing wind resistance, and the splayed 680mm foot spread delivers stable lateral support. The central 800 x 400 x 120 mm dual-function cavity accepts a gas fire burner with maximum 55000 BTU heat output, charcoal grill insert, or 30L insulated ice bucket, and the hidden compartment stores connectors, grill grates, or the ice liner when not in active use. When the cavity is covered, the table provides a flat dining surface supporting 136kg of distributed static load, with 650mm of apron clearance to seat 8 guests comfortably. The rust-proof frame and frost-resistant tile withstand rain, sun, and freezing temperatures for year-round use, suitable for residential backyards, villa terraces, and garden spaces, as well as commercial restaurant sidewalk patios, resort poolside dining areas, and rooftop bars placed on concrete, stone paver, tile, or wood deck surfaces, paired with matching bronze-finish cast aluminum outdoor chairs. Procurement teams should note the product ships unbranded in two cartons per set, with 40 minutes of required assembly time per unit, and no specialized tools included for installation. There are no matching accessories sold alongside the base table, so compatible fire burners, charcoal grates, and ice bucket inserts must be sourced separately to utilize the cavity’s full functionality.

Rectangular Cast Aluminum Tile-Top Outdoor Dining Table with Recessed Fire Pit/Ice Bucket Cavity Specifications

供应商与现货