纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	3000 × 3000 × 2700 mm
Overall footprint (fully open)	3000 x 3000 x 2700 mm
Canopy octagonal diameter	3000 mm
Cross base footprint	1000 x 1000 mm
Main support pole diameter	68 mm
Offset support arm diameter	50 mm
Main pole wall thickness	2.0 mm
Support rib profile	14 x 24 mm, 1.0 mm thick
Rib count	8 ribs
Canopy fabric thickness	270 gsm
Open under-canopy clearance	2200 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net product weight	30 kg
Recommended total base ballast weight	150 kg
UV protection rating	UPF 50+
Fabric water repellency	Light rain resistance, 300 mm water column
Wind resistance rating	Gusts up to 38 km/h
Fabric colorfastness lifespan	3 years
Frame rust resistance lifespan	5 years
Mechanism cycle rating	1000 open/close cycles
Standard limited warranty	3 years
Reference Static Load	150 kg depending on category

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Main support pole	Powder-coated aluminum with wood-grain finish
Offset cantilever arm	Powder-coated aluminum with matching wood-grain finish
Canopy outer surface	270 gsm solution-dyed polyester, light orange
Canopy inner surface	270 gsm solution-dyed polyester, bright red-orange
Support ribs	Black powder-coated steel, 8 total
Apex wind vent	Matching two-tone polyester mesh flap
Cross base	Black powder-coated steel four-prong frame
Crank and tilt hardware	Zinc-plated steel with black finish
Storage fastener	Velcro fabric strap
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Canopy operation	Manual crank handle for smooth open and close
Tilt adjustment	Lockable crank tilt with 5 preset positions
Rotation function	360-degree foot-pedal controlled rotation
Base compatibility	Accepts sand/water filled weights or concrete pavers on cross prongs
Canopy venting	Built-in apex wind vent reduces uplift and air pressure
Closed storage	Compact folded profile with velcro strap to secure fabric
Assembly requirement	Two-section pole and arm assembly with bolted hardware
Tilt adjustment range	35 degrees
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential patio use	Suitable for backyard decks, poolside areas and garden seating sets
Light commercial outdoor use	Appropriate for cafe sidewalk seating, hotel terrace lounge areas
Hard surface placement	Designed for concrete, stone or paved patios
4-6 person shading capacity	Covers standard 6-seat patio dining set or 4 lounge chairs
All-season outdoor storage	Compatible with standard umbrella protective covers
Sun-tracking shade adjustment	Tilt and rotation functions adjust shade throughout daylight hours

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Outdoor furniture mechanical safety	EN 581:2015
Textile UV protection testing	EN 13758:2001+A1:2006

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Outdoor furniture fabric UV resistance	GB/T 18830
Metal furniture coating adhesion	GB/T 9286
Outdoor furniture structural safety	GB 28007

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Outdoor furniture fabric UV resistance：GB/T 18830；
2. Metal furniture coating adhesion：GB/T 9286；
3. Outdoor furniture structural safety：GB 28007；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CANT-UMB-3M-WG-OR

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CANT-UMB-3M-WG-OR

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CANT-UMB-3M-WG-OR打开导出工具

页面快速操作

发布采购询价

产品描述

This cantilever offset patio umbrella features a polished two-tone orange color scheme, with a light orange outer canopy and bright red-orange inner canopy paired with wood-grain finished support poles for a warm, modern outdoor aesthetic. Its octagonal canopy sits offset from the vertical support pole, anchored by a four-prong cross base that sits flush to hard surfaces without protruding into central seating areas, and an integrated two-tone mesh vent at the canopy apex adds subtle visual balance while supporting functional performance. The frame is constructed from powder-coated aluminum for the main support pole and offset cantilever arm, finished with a consistent wood-grain texture that mimics natural timber without the maintenance requirements of real wood. The eight support ribs are made of black powder-coated steel, with zinc-plated steel hardware finished in black for the crank and tilt mechanisms, and a durable 270 gsm solution-dyed polyester canopy. The four-prong cross base is built from black powder-coated steel, designed to hold compatible ballast options for stable placement. Operation is designed for straightforward, user-friendly adjustment: a manual crank handle enables smooth opening and closing of the canopy, while a lockable crank tilt mechanism offers five preset positions to adjust shade angle. A foot-pedal control enables 360-degree rotation of the entire canopy assembly, letting users track sun movement across the day without repositioning the base. The apex wind vent reduces air pressure buildup and canopy uplift in windy conditions, and when closed, the canopy secures with an integrated Velcro fabric strap for a neat, compact stored profile. The umbrella provides shade coverage for 4 to 6 people, fitting seamlessly over standard 6-seat patio dining sets or clusters of four lounge chairs. It is well suited for residential outdoor spaces including backyard decks, poolside relaxation zones and garden seating areas, as well as light commercial settings such as cafe sidewalk seating and hotel terrace lounges. It is engineered for placement on concrete, stone or paved hard surfaces, and is compatible with standard umbrella protective covers for off-season storage. For procurement planning, note that the unit ships in two cartons, with an assembly time of 40 minutes per set. The cross base requires separate ballast, which may consist of sand or water filled weights or concrete pavers placed on the base prongs to meet recommended ballast weight requirements. All required bolted hardware for assembly of the two-section pole and arm is included with purchase. The fabric delivers UPF 50+ UV protection and light rain resistance, with documented colorfastness for multi-year outdoor use, while the powder-coated frame provides long-term rust resistance for extended outdoor deployment.

3m Two-Tone Orange Cantilever Offset Patio Umbrella with Wood-Grain Pole Specifications

供应商与现货