纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	3050 × 3050 × 2650 mm
Canopy shade area	9.3 m²
Vertical main pole diameter	48 mm
Cross base footprint	1000 x 1000 mm
Cantilever arm length	2750 mm
Canopy rib length	1525 mm
Bottom canopy edge height from ground	2100 mm
Upper vent canopy diameter	1200 mm
Cross base arm width	80 mm
Pole wall thickness	1.5 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Product net weight	23 kg
Recommended base ballast weight	100 kg
Maximum static wind resistance	48 km/h
Canopy UV protection rating	UPF 50+
Fabric water repellency grade	Grade 4 per AATCC 22
Canopy fabric weight	281 gsm
Recommended user capacity	6 people
Tilt angle adjustment range	45 degrees
Mechanism crank open/close cycles	1000 cycles
Reference Static Load	150 kg depending on category

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Main vertical pole	Powder-coated dark bronze aluminum, 1.5mm wall thickness
Cantilever support arm	Powder-coated dark bronze aluminum, triangular reinforced bracing
Canopy support ribs	8 pieces powder-coated carbon steel, 1.2mm wall thickness
Main canopy fabric	281 gsm solution-dyed polyester, PA water-repellent coating
Upper vent canopy	Matching off-white solution-dyed polyester, stitched perimeter reinforcement
Cross base frame	Powder-coated black steel, accepts concrete/sand weight plates
Tilt/rotation mechanism housing	Die-cast aluminum with corrosion-resistant coating
Canopy edge binding	Polyester webbing, double-stitched with UV-resistant thread
Hardware fasteners	Stainless steel 304 grade, rust-resistant for outdoor use
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

360-degree rotation	Foot-pedal actuated full rotation with positive lock positions
Canopy tilt adjustment	6-position locking tilt, adjustable up to 45 degrees via crank/lever
Canopy open/close operation	Hand crank lift system with auto-lock when fully opened
Double-vent wind ventilation	Upper independent vent allows airflow to reduce canopy wind lift
Cantilever offset shade design	No central pole under canopy, creates unobstructed shade area below
Cross base compatibility	Accepts sand/concrete weight plates or sandbags for ballast
Canopy angle lock	Positive lock at each tilt position prevents unintended movement
Quick disassembly	Tool-free removal of canopy and arm for off-season storage
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential patio use	Suitable for backyard patio seating, dining sets and lounge areas
Poolside application	Corrosion-resistant frame works for high-humidity pool perimeter shading
Commercial outdoor seating	Suitable for cafe and restaurant patio seating areas
Garden leisure areas	Ideal for garden lounge sets and outdoor relaxation spaces
Balcony use	Offset design fits large balconies without central pole obstruction
Event temporary shading	Can be repositioned for small outdoor events and gatherings

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 13763-1:2009	Applies to outdoor furniture umbrella mechanical safety and stability requirements
EN 13561:2015	Applies to external sun shading performance and wind resistance requirements

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 23173-2008	Applies to parylene/coated metal corrosion resistance for outdoor metal frames
GB 18401-2010	Applies to textile safety requirements for canopy fabric direct contact use

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 23173-2008：Applies to parylene/coated metal corrosion resistance for outdoor metal frames；
2. GB 18401-2010：Applies to textile safety requirements for canopy fabric direct contact use；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CU-10FT-DV-OFFW-BRZ

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CU-10FT-DV-OFFW-BRZ

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CU-10FT-DV-OFFW-BRZ打开导出工具

页面快速操作

发布采购询价

产品描述

This unbranded double-tier vented cantilever offset patio umbrella, model CU-10FT-DV-OFFW-BRZ, features a powder-coated dark bronze metal frame paired with an off-white solution-dyed polyester canopy, supported by a steel cross base. Its offset cantilever structure eliminates central pole obstruction beneath the canopy, creating an open, unbroken shaded footprint anchored by a 1000mm cross base, with a 1200mm upper vent centered above the main canopy for a layered, balanced visual profile. A total of eight powder-coated carbon steel ribs support the canopy, while the vertical main pole and cantilever support arm use powder-coated dark bronze aluminum; the cantilever arm incorporates triangular reinforced bracing for structural rigidity, with a die-cast aluminum tilt and rotation mechanism housing finished with corrosion-resistant coating. The 281 gsm main canopy fabric carries a PA water-repellent coating, with matching solution-dyed polyester used for the upper vent, which includes stitched perimeter reinforcement. All canopy edges are finished with polyester webbing, double-stitched with UV-resistant thread, and all hardware fasteners are 304-grade stainless steel for rust resistance in outdoor settings. The cross base is designed to accept concrete plates, sand plates, or sandbags for ballast. The umbrella delivers intuitive, user-focused functionality for outdoor use. A foot-pedal actuator controls full 360-degree rotation with positive lock positions to hold the desired orientation, while a crank and lever system enables six-position locking tilt adjustment up to 45 degrees, with secure angle locks to prevent unintended movement. A hand crank system operates canopy opening and closing, with an auto-lock feature that engages when the canopy is fully extended. The independent upper vent allows consistent airflow through the canopy structure to reduce wind lift, and the canopy provides UPF 50+ UV protection with Grade 4 water repellency. The unobstructed shaded area accommodates up to six users comfortably. This umbrella fits a wide range of residential and commercial outdoor spaces. It works seamlessly for residential backyard patio seating, dining sets, lounge areas, and large balconies, where its offset design avoids blocking seating or sightlines. Its corrosion-resistant frame makes it well-suited for high-humidity poolside placement, and it delivers reliable shading for commercial cafe and restaurant patio seating, garden leisure areas, and small outdoor events or gatherings where temporary repositionable shade is needed. For procurement, note that each unit ships in two cartons, requires 40 minutes of assembly per set, and has a packaged gross weight of 120kg. Plan for appropriate ballast to match site conditions, and select placement that aligns with the product’s static wind resistance rating for long-term use.

10ft Double-Tier Vented Cantilever Offset Patio Umbrella with Cross Base Specifications

供应商与现货