纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	420 × 420 × 620 mm
Top panel size	420 x 420 mm
Base panel size	420 x 420 mm
Vertical support panel thickness	20 mm
Under-top vertical clearance	370 mm
Under-top horizontal depth clearance	380 mm
Edge chamfer width	8 mm
Top surface height above floor	620 mm
Base panel thickness	20 mm
Seat Cushion Thickness	180 mm
Back Cushion Thickness	160 mm
Leg Height / Floor Clearance	160 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Table top static load capacity	25 kg
Net product weight	12 kg
Floor contact static pressure	0.02 MPa
Surface scratch resistance	3H pencil hardness
Surface heat resistance (short contact)	80 °C
Standard limited warranty	3 years
Available color count	4
Seat Foam Density / Rebound	40 kg/m³ / 60%
Upholstery Abrasion Reference	Fabric 60000 cycles; leather-class cover 1.4 mm
Per-seat Load Reference	130 kg/seat

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Top panel	Solid hardwood panel with matte black stain
Vertical support panel	Solid hardwood panel, grain matched to top and base
Base panel	Solid hardwood panel with matching matte black finish
Panel joint construction	Mitered reinforced corner joinery with wood dowels
Surface finish	Low-VOC matte black wood stain with clear topcoat
Edge treatment	Hand-sanded 8mm chamfer on all exposed edges
Floor contact pads	3mm thick non-slip felt pads attached to base corners
Adhesive for assembly	Water-resistant PVA wood glue
Wood moisture content	10%
Timber Frame Section / Moisture	Primary section ≥30 × 50 mm; recommended moisture 12%
Spring / Webbing Specification	Sinuous spring wire 4 mm; elastic webbing 70 mm wide
Leg Connector Specification	Reference M8-M10 with at least 1 mechanical fixing per leg

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Slide-under design	Fully open front clearance allows base to slide under sofa/bed frames
Stability design	Wide matching square base lowers center of gravity to prevent tipping
Edge safety feature	Chamfered edges eliminate sharp corners to reduce impact injury risk
Floor protection	Felt base pads prevent scuffing and scratching on hard floor surfaces
Placement flexibility	Compact footprint fits narrow gaps between sofa and wall
Surface function	Flat level top supports drinks, laptops, books, and table lamps
Assembly requirement	Fully assembled upon delivery for monolithic solid wood construction
Cushion Service Configuration	Recommended 2removable/replaceable cushion methods

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Module Carton Dimensions	2200× 1050× 850 mm
Reference Packaging Volume	1.8 m³/item
Reference Packaged Gross Weight	110 kg/item

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Living room sofa side use	Placed beside upholstered sofas to hold drinks, remotes, and reading lamps
Bedroom bedside use	Slides partially under bed frames to create a narrow-profile nightstand
Small apartment flexible accent use	Compact footprint works for studio and small-space layouts where full end tables do not fit
Work from home laptop side stand	Slides under seating to hold laptops or tablets for couch-based work
Commercial lounge space use	Suitable for hotel lobbies, co-working lounges, and reception waiting areas
Hallway accent placement	Positioned in narrow entry hallways to hold keys, small decor, and table lamps

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Furniture - Strength, durability and safety requirements for domestic tables
EN 71-3:2019	Safety of toys - Migration of certain elements, applicable for edge and coating safety

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for dimensional and structural acceptance
GB 18584-2001	Indoor decorating and refurbishing materials - limit of harmful substances in wooden furniture

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable for dimensional and structural acceptance；
2. GB 18584-2001：Indoor decorating and refurbishing materials - limit of harmful substances in wooden furniture；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CST-BLK-420W-620H

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CST-BLK-420W-620H

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CST-BLK-420W-620H打开导出工具

页面快速操作

发布采购询价

产品描述

The Matte Black Solid Wood Monolithic C-Shaped Sofa Side End Table delivers a streamlined, contemporary silhouette defined by its fixed cantilever C-structure, formed by matching square top and base panels connected by a continuous vertical support. All exposed edges feature softly hand-sanded chamfers that eliminate sharp corners, lending a refined, finished look to its uniform matte black wood finish. Grain matching across all three solid wood panels creates a cohesive, seamless visual presence that complements minimalist and modern interior schemes, while the compact footprint fits easily in narrow gaps without overwhelming surrounding furnishings. Crafted from solid hardwood, the table uses monolithic panel construction with mitered reinforced corner joinery secured by wood dowels and water-resistant PVA wood glue, with wood moisture content calibrated for long-term shape retention. Every panel is finished with a low-VOC matte black stain topped with a clear protective coat, offering a surface hardness that resists routine scratches, and tolerance for short-term contact with moderately hot items. Non-slip felt pads affixed to the base corners prevent scuffing and scratching on hard flooring surfaces, while the wide, weighted base lowers the unit’s center of gravity to reduce tipping risk. The table arrives fully assembled, with no additional on-site construction required for end users. Its open-front slide-under design allows the base to tuck fully under sofa or bed frames, bringing the flat, level top surface within easy reach to hold drinks, laptops, books, table lamps, remotes, or small personal items. The form works seamlessly for residential use, including placement beside living room sofas, as a narrow-profile nightstand in bedrooms, as a flexible accent piece in studio apartments and small-space layouts, as a couch-side stand for work-from-home setups, or as a slim entryway surface for keys and small decor. It also suits commercial environments including hotel lobbies, co-working lounges, and reception waiting areas. Procurement teams and buyers should note the unit is sold unbranded, is available in 4 total color options, and is backed by a 3-year standard limited warranty. The tabletop supports a maximum static load of 25 kg, and shipping is packaged across 2 cartons per unit. The top surface sits 620 mm above floor level, with ample open clearance under the top to accommodate standard sofa and bed frame overhangs.

Matte Black Solid Wood Monolithic C-Shaped Sofa Side End Table Specifications

供应商与现货