| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 420 x 420 x 620 mm | |
|---|---|---|
| Top panel size | 420 x 420 mm | |
| Base panel size | 420 x 420 mm | |
| Vertical support panel thickness | 20 mm | |
| Under-top vertical clearance | 370 mm | |
| Under-top horizontal depth clearance | 380 mm | |
| Edge chamfer width | 8 mm | |
| Top surface height above floor | 620 mm | |
| Base panel thickness | 20 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Table top static load capacity | 25 kg | |
|---|---|---|
| Net product weight | 12 kg | |
| Floor contact static pressure | 0.02 MPa | |
| Surface scratch resistance | 3H pencil hardness | |
| Surface heat resistance (short contact) | 80 °C | |
| Standard limited warranty | 3 years | |
| Available color count | 4 | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat |
Core acceptance fields · Panels / hardware / frame / upholstery
| Top panel | Solid hardwood panel with matte black stain | |
|---|---|---|
| Vertical support panel | Solid hardwood panel, grain matched to top and base | |
| Base panel | Solid hardwood panel with matching matte black finish | |
| Panel joint construction | Mitered reinforced corner joinery with wood dowels | |
| Surface finish | Low-VOC matte black wood stain with clear topcoat | |
| Edge treatment | Hand-sanded 8mm chamfer on all exposed edges | |
| Floor contact pads | 3mm thick non-slip felt pads attached to base corners | |
| Adhesive for assembly | Water-resistant PVA wood glue | |
| Wood moisture content | 10% | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg |
Adjustment / rotation / tilt / mobility / storage features
| Slide-under design | Fully open front clearance allows base to slide under sofa/bed frames | |
|---|---|---|
| Stability design | Wide matching square base lowers center of gravity to prevent tipping | |
| Edge safety feature | Chamfered edges eliminate sharp corners to reduce impact injury risk | |
| Floor protection | Felt base pads prevent scuffing and scratching on hard floor surfaces | |
| Placement flexibility | Compact footprint fits narrow gaps between sofa and wall | |
| Surface function | Flat level top supports drinks, laptops, books, and table lamps | |
| Assembly requirement | Fully assembled upon delivery for monolithic solid wood construction | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Living room sofa side use | Placed beside upholstered sofas to hold drinks, remotes, and reading lamps | |
|---|---|---|
| Bedroom bedside use | Slides partially under bed frames to create a narrow-profile nightstand | |
| Small apartment flexible accent use | Compact footprint works for studio and small-space layouts where full end tables do not fit | |
| Work from home laptop side stand | Slides under seating to hold laptops or tablets for couch-based work | |
| Commercial lounge space use | Suitable for hotel lobbies, co-working lounges, and reception waiting areas | |
| Hallway accent placement | Positioned in narrow entry hallways to hold keys, small decor, and table lamps |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety requirements for domestic tables | |
|---|---|---|
| EN 71-3:2019 | Safety of toys - Migration of certain elements, applicable for edge and coating safety |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural acceptance | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances in wooden furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structural acceptance; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances in wooden furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
