商品供应商Modern Z-Shaped Cantilever Round Side Table，18mm thick medium density fiberboard
可联系供应商获取生产周期与报价。
PRODUCT MODULE 01 / 06
基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源：工厂资料结构化字段，最终以实测值为准
| 产品外部尺寸（宽 × 深 × 高） | 450 × 450 × 600 mm | |
|---|---|---|
| Round tabletop diameter | 450 mm | |
| Tabletop edge thickness | 18 mm | |
| Under-table vertical clearance from floor | 582 mm | |
| Cantilever support leg angle | 65 degrees from horizontal | |
| Sliding base bar length | 450 mm | |
| Rear stabilizer foot length | 180 mm | |
| Frame tubing wall thickness | 1.2 mm | |
| Foot pad diameter | 20 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源：产品性能数据，采购前请核对具体测试口径
| Tabletop static load capacity | 15 kg | |
|---|---|---|
| Net product weight | 2.7 kg | |
| Anti-tilt stability load offset | 80 mm | |
| Tabletop surface wear resistance | 3000 abrasion cycles | |
| Finish corrosion resistance | 48 hour neutral salt spray resistance | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
PRODUCT MODULE 03 / 06
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源：以工厂材质清单与验货报告为准
| Tabletop substrate | 18mm thick medium density fiberboard | |
|---|---|---|
| Tabletop surface finish | Matte white melamine laminate | |
| Support frame | 1.2mm thick carbon steel tubing | |
| Ground contact foot pads | Non-slip injection-molded rubber | |
| Frame connection hardware | Zinc-plated steel bolts and lock nuts | |
| Frame surface coating | Electrostatic polyester powder coating | |
| Edge banding | 1mm thick PVC edge trim | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源：功能配置参数，以供应商正式规格为准
| Slide-under base design | Low-profile horizontal base slides fully under sofas and beds | |
|---|---|---|
| Fixed height configuration | 600mm fixed table height optimized for sofa armrest alignment | |
| Cantilever load support | Offset single-leg Z-frame supports full rated load without central obstruction | |
| Floor protection design | Rubber foot pads on all ground contact points | |
| Surface utility function | Smooth round tabletop holds drinks, small electronics, books or decor items | |
| Assembly requirement | Knock-down assembly with included hex key | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源：外贸报价与装柜测算参考
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
PRODUCT MODULE 06 / 06
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源：依据产品结构与品类整理的推荐应用场景
| Living room application | Positioned alongside sofas or armchairs for holding drinks and remote controls | |
|---|---|---|
| Bedroom application | Placed next to beds as a compact nightstand for phones, lamps or reading materials | |
| Small apartment use | Suitable for studio and micro-apartment layouts where full-sized coffee tables are impractical | |
| Home office side use | Positioned next to desk chairs for holding mugs, notebooks or small devices | |
| Hard flooring compatibility | Works on wood, tile and laminate floors without scratching |
STANDARD S1
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
该市场暂无标准数据。
STANDARD S3
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
该市场暂无标准数据。
招标文件标准化描述文本
本产品须满足以下技术参数要求： 1. 技术标准与检测报告由供应商在投标或采购确认阶段提供； 最终交付参数、检测报告和验收标准以双方采购合同为准。
GENERATED EXPORTS
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告，可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块，文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具