| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 450 x 450 x 600 mm | |
|---|---|---|
| Round tabletop diameter | 450 mm | |
| Tabletop edge thickness | 18 mm | |
| Under-table vertical clearance from floor | 582 mm | |
| Cantilever support leg angle | 65 degrees from horizontal | |
| Sliding base bar length | 450 mm | |
| Rear stabilizer foot length | 180 mm | |
| Frame tubing wall thickness | 1.2 mm | |
| Foot pad diameter | 20 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Tabletop static load capacity | 15 kg | |
|---|---|---|
| Net product weight | 2.7 kg | |
| Anti-tilt stability load offset | 80 mm | |
| Tabletop surface wear resistance | 3000 abrasion cycles | |
| Finish corrosion resistance | 48 hour neutral salt spray resistance | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | 18mm thick medium density fiberboard | |
|---|---|---|
| Tabletop surface finish | Matte white melamine laminate | |
| Support frame | 1.2mm thick carbon steel tubing | |
| Ground contact foot pads | Non-slip injection-molded rubber | |
| Frame connection hardware | Zinc-plated steel bolts and lock nuts | |
| Frame surface coating | Electrostatic polyester powder coating | |
| Edge banding | 1mm thick PVC edge trim | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Slide-under base design | Low-profile horizontal base slides fully under sofas and beds | |
|---|---|---|
| Fixed height configuration | 600mm fixed table height optimized for sofa armrest alignment | |
| Cantilever load support | Offset single-leg Z-frame supports full rated load without central obstruction | |
| Floor protection design | Rubber foot pads on all ground contact points | |
| Surface utility function | Smooth round tabletop holds drinks, small electronics, books or decor items | |
| Assembly requirement | Knock-down assembly with included hex key | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Living room application | Positioned alongside sofas or armchairs for holding drinks and remote controls | |
|---|---|---|
| Bedroom application | Placed next to beds as a compact nightstand for phones, lamps or reading materials | |
| Small apartment use | Suitable for studio and micro-apartment layouts where full-sized coffee tables are impractical | |
| Home office side use | Positioned next to desk chairs for holding mugs, notebooks or small devices | |
| Hard flooring compatibility | Works on wood, tile and laminate floors without scratching |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
