商品供应商2-Piece Walnut-Finish Stone Top Living Room Set: TV Console and Coffee Table,Walnut
可联系供应商获取生产周期与报价。
| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
暂无参数纠错记录,发现错误可点击行末旗标提交 | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| Carcass Panel Thickness | 25 mm | |
|---|---|---|
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
| TV console total static load capacity | 120 kg | |
|---|---|---|
| Sintered stone surface impact resistance | 6 mm steel ball drop from 300 mm no damage | |
| Set total net weight | 95 kg | |
| Recommended maximum TV size for console | 85 inches | |
| Recommended service life | 8 years | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| Tabletop (both units) | 12mm polished gray sintered stone | |
|---|---|---|
| Frame and cabinet body | E0 grade engineered wood with walnut veneer finish | |
| Support legs | Solid rubber wood with walnut finish | |
| Drawer pulls | Brushed brass-finish zinc alloy | |
| Drawer slides | 3-section full extension ball bearing slides | |
| Back panel | 3mm thick hardboard | |
| Shelf dividers | 15mm thick engineered wood matching frame finish | |
| Surface finish on wood components | Matte PU lacquer | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| TV console storage configuration | 2 soft-close drawers + 3 divided open storage bays | |
|---|---|---|
| Coffee table storage configuration | 2 soft-close drawers + 1 divided open lower shelf | |
| Cable management for TV console | Rear pre-cut cable pass-through holes | |
| Sintered stone surface maintenance | Non-porous, wipe-clean with damp cloth | |
| Floor protection | Felt pads pre-installed on all leg bases | |
| Assembly requirement | Knock-down leg attachment, pre-assembled cabinet bodies | |
| Drawer operation | Full extension with 300mm travel | |
| Open shelf access | Front-facing open design without doors | |
| Cable / Vent Opening Reference | 80 mm diameter; recommend 4rear cable/vent openings |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
推荐空间 / 目标用户 / 使用方式
| Primary application | Residential living rooms paired with 85inch wall-mounted TVs | |
|---|---|---|
| Secondary application | Open-plan apartment lounge areas | |
| Prohibited use case | Commercial high-traffic public spaces | |
| Flooring compatibility | Hardwood, tile, polished concrete and low-pile carpet | |
| Styling compatibility | Mid-century modern, contemporary and wabi-sabi interior schemes |
欧洲市场准入与化学品要求
| EN 312:2010 | Particleboard specifications for furniture use | |
|---|---|---|
| EN 14749:2016 | Safety requirements for domestic storage furniture |
适用于中国市场项目的标准
| GB/T 3324-2017 | General technical requirements for wooden furniture | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels | |
| GB/T 4897.3-2003 | Performance requirements for particleboard in furniture |
本产品须满足以下技术参数要求: 1. GB/T 3324-2017:General technical requirements for wooden furniture; 2. GB 18580-2017:Formaldehyde emission limits for wood-based panels; 3. GB/T 4897.3-2003:Performance requirements for particleboard in furniture; 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告,可选择公制或英制单位。
导出全部商品信息与参数模块,文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段,可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具