| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Carcass Panel Thickness | 25 mm | |
|---|---|---|
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| TV console total static load capacity | 120 kg | |
|---|---|---|
| Sintered stone surface impact resistance | 6 mm steel ball drop from 300 mm no damage | |
| Set total net weight | 95 kg | |
| Recommended maximum TV size for console | 85 inches | |
| Recommended service life | 8 years | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop (both units) | 12mm polished gray sintered stone | |
|---|---|---|
| Frame and cabinet body | E0 grade engineered wood with walnut veneer finish | |
| Support legs | Solid rubber wood with walnut finish | |
| Drawer pulls | Brushed brass-finish zinc alloy | |
| Drawer slides | 3-section full extension ball bearing slides | |
| Back panel | 3mm thick hardboard | |
| Shelf dividers | 15mm thick engineered wood matching frame finish | |
| Surface finish on wood components | Matte PU lacquer | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| TV console storage configuration | 2 soft-close drawers + 3 divided open storage bays | |
|---|---|---|
| Coffee table storage configuration | 2 soft-close drawers + 1 divided open lower shelf | |
| Cable management for TV console | Rear pre-cut cable pass-through holes | |
| Sintered stone surface maintenance | Non-porous, wipe-clean with damp cloth | |
| Floor protection | Felt pads pre-installed on all leg bases | |
| Assembly requirement | Knock-down leg attachment, pre-assembled cabinet bodies | |
| Drawer operation | Full extension with 300mm travel | |
| Open shelf access | Front-facing open design without doors | |
| Cable / Vent Opening Reference | 80 mm diameter; recommend 4rear cable/vent openings |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Primary application | Residential living rooms paired with 85inch wall-mounted TVs | |
|---|---|---|
| Secondary application | Open-plan apartment lounge areas | |
| Prohibited use case | Commercial high-traffic public spaces | |
| Flooring compatibility | Hardwood, tile, polished concrete and low-pile carpet | |
| Styling compatibility | Mid-century modern, contemporary and wabi-sabi interior schemes |
EU Market Access Requirements* EN Standards
| EN 312:2010 | Particleboard specifications for furniture use | |
|---|---|---|
| EN 14749:2016 | Safety requirements for domestic storage furniture |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels | |
| GB/T 4897.3-2003 | Performance requirements for particleboard in furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture; 2. GB 18580-2017: Formaldehyde emission limits for wood-based panels; 3. GB/T 4897.3-2003: Performance requirements for particleboard in furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
