商品供应商Light Oak Z-Cantilever Round Solid Wood Side End Table，Imported Ash Solid Wood
可联系供应商获取生产周期与报价。
2026-09-13 15:26人气: 7
参数纠错历史记录（所有访客可见）
| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
暂无参数纠错记录，发现错误可点击行末旗标提交 | ||||
| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
暂无参数纠错记录，发现错误可点击行末旗标提交 | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| Overall dimensions | 500 x 400 x 600 mm | |
|---|---|---|
| Round tabletop diameter | 500 mm | |
| Tabletop thickness | 40 mm | |
| Total product height from floor to tabletop | 600 mm | |
| Horizontal base foot length | 400 mm | |
| Horizontal base foot width | 50 mm | |
| Vertical support member width | 45 mm | |
| Tabletop edge radius | 3 mm | |
| Under-table open vertical clearance above base foot | 150 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
净重 / 最大承重 / 适用人数 / 耐久性能
| Net product weight | 15 kg | |
|---|---|---|
| Static distributed tabletop load capacity | 23 kg | |
| Recommended maximum item diameter placed on top | 450 mm | |
| Recommended warranty period for commercial use | 24 months | |
| Available finish color options | 3 | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| Tabletop | Solid rubberwood/pine panel with natural light oak clear matte finish | |
|---|---|---|
| Z-shaped cantilever frame | Bent solid hardwood matching tabletop wood species | |
| Horizontal sled base foot | Solid hardwood open rectangular frame with flat floor contact | |
| Surface finish | Low-VOC clear matte wood lacquer, 80g/m² coating thickness | |
| Frame-to-tabletop joints | Reinforced mortise-and-tenon or screwed metal insert connections | |
| Floor contact pads | 2mm thick non-slip felt pads on base bottom | |
| Wood moisture content | 10% | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| Tabletop use | Flat round surface supports drinks, books, remote controls or table lamps beside seating | |
|---|---|---|
| Assembly requirement | Two-part (tabletop + base) knockdown assembly with included hex hardware, no specialized tools needed | |
| Floor protection | Pre-applied felt pads on base feet prevent scratching of hardwood, tile or laminate flooring | |
| No adjustment features | Fixed height, fixed position with no casters, swivel or height adjustment mechanisms | |
| No integrated storage | Solid open frame design with no shelves, drawers or enclosed storage compartments | |
| Stability performance | Wide low center of gravity from long horizontal base prevents tipping during normal side table use | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
推荐空间 / 目标用户 / 使用方式
| Residential living room | Place beside sofas or armchairs to hold drinks, reading materials and electronic devices | |
|---|---|---|
| Bedroom bedside use | Slide partially under bed frames as a compact alternative to large nightstands for small bedrooms | |
| Commercial lounge spaces | Use in office break areas, hotel lobbies or coworking waiting zones next to lounge seating | |
| Small-space urban apartments | Compact footprint is suited for studio units with limited floor space around seating | |
| Hard-floor environments | Recommended for hardwood, tile or laminate floors with felt pad protection to avoid surface damage | |
| Match with Nordic/Japandi interiors | Light natural wood finish and clean geometric lines coordinate with minimalist, wabi-sabi or Scandinavian decor styles |
欧洲市场准入与化学品要求
适用于中国市场项目的标准
本产品须满足以下技术参数要求： 1. 技术标准与检测报告由供应商在投标或采购确认阶段提供； 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告，可选择公制或英制单位。
导出全部商品信息与参数模块，文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具
