| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 500 x 400 x 600 mm | |
|---|---|---|
| Round tabletop diameter | 500 mm | |
| Tabletop thickness | 40 mm | |
| Total product height from floor to tabletop | 600 mm | |
| Horizontal base foot length | 400 mm | |
| Horizontal base foot width | 50 mm | |
| Vertical support member width | 45 mm | |
| Tabletop edge radius | 3 mm | |
| Under-table open vertical clearance above base foot | 150 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Net product weight | 15 kg | |
|---|---|---|
| Static distributed tabletop load capacity | 23 kg | |
| Recommended maximum item diameter placed on top | 450 mm | |
| Recommended warranty period for commercial use | 24 months | |
| Available finish color options | 3 | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | Solid rubberwood/pine panel with natural light oak clear matte finish | |
|---|---|---|
| Z-shaped cantilever frame | Bent solid hardwood matching tabletop wood species | |
| Horizontal sled base foot | Solid hardwood open rectangular frame with flat floor contact | |
| Surface finish | Low-VOC clear matte wood lacquer, 80g/m² coating thickness | |
| Frame-to-tabletop joints | Reinforced mortise-and-tenon or screwed metal insert connections | |
| Floor contact pads | 2mm thick non-slip felt pads on base bottom | |
| Wood moisture content | 10% | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Tabletop use | Flat round surface supports drinks, books, remote controls or table lamps beside seating | |
|---|---|---|
| Assembly requirement | Two-part (tabletop + base) knockdown assembly with included hex hardware, no specialized tools needed | |
| Floor protection | Pre-applied felt pads on base feet prevent scratching of hardwood, tile or laminate flooring | |
| No adjustment features | Fixed height, fixed position with no casters, swivel or height adjustment mechanisms | |
| No integrated storage | Solid open frame design with no shelves, drawers or enclosed storage compartments | |
| Stability performance | Wide low center of gravity from long horizontal base prevents tipping during normal side table use | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential living room | Place beside sofas or armchairs to hold drinks, reading materials and electronic devices | |
|---|---|---|
| Bedroom bedside use | Slide partially under bed frames as a compact alternative to large nightstands for small bedrooms | |
| Commercial lounge spaces | Use in office break areas, hotel lobbies or coworking waiting zones next to lounge seating | |
| Small-space urban apartments | Compact footprint is suited for studio units with limited floor space around seating | |
| Hard-floor environments | Recommended for hardwood, tile or laminate floors with felt pad protection to avoid surface damage | |
| Match with Nordic/Japandi interiors | Light natural wood finish and clean geometric lines coordinate with minimalist, wabi-sabi or Scandinavian decor styles |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
