纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	900 × 1800 × 750 mm
Tabletop thickness	40 mm
Leg cross-section	80 x 80 mm square
Floor to apron clearance	700 mm
Leg height	710 mm
Tabletop corner radius	30 mm
Apron height	120 mm
Per-seat width allocation	600 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Static distributed tabletop load	150 kg
Static vertical load per leg	75 kg
Seating capacity	6 persons
Net product weight	45 kg
Surface horizontal impact resistance	14 J
Wood moisture content	12%
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop	Solid rubberwood edge-glued planks, natural matte clear finish
Legs	Solid square-section rubberwood, matching natural finish
Apron frame	Solid rubberwood horizontal support frame, dowel and bolt connected
Surface finish	Clear water-based polyurethane matte coating, 0.15 mm dry film thickness
Joint hardware	Zinc-plated steel 8 mm bolt connectors and wood dowels
Foot pads	4 mm thick non-slip PE pads at each leg base
Connector reinforcement	Steel corner brackets at apron-leg joints, 2 mm thick
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support
Reference Finish / Color Count	Recommended 6top finishes and 3frame colors

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Structure type	Fixed non-extendable rectangular dining table
Assembly method	Knockdown assembly, legs attach to apron frame with included hardware
Floor protection	Included non-slip foot pads prevent hardwood and tile floor scratches
Clearance design	Unobstructed under-table space with no center crossbar
Edge treatment	Rounded eased edge profile on all tabletop perimeters
Leveling adjustment	5 mm height adjustment range via adjustable foot pads
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential dining room	Primary use for family daily meals, seats 6 people comfortably
Small open-plan kitchen	Fits compact apartment dining areas without obstructive crossbars
Rental and furnished apartments	Durable solid wood construction suits high-turnover residential use
Casual home office space	Doubles as a large work surface for home projects or group work
Small event and break room use	Suitable for light commercial office break rooms seating 6staff

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Furniture - Strength, durability and safety for domestic dining tables, applicable for procurement testing
EN 1022:2018	Domestic furniture - seating and tables, stability test method applicable

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to residential dining table acceptance
GB 18584-2001	Indoor decorating and refurbishing materials - limit of harmful substances in wood furniture

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to residential dining table acceptance；
2. GB 18584-2001：Indoor decorating and refurbishing materials - limit of harmful substances in wood furniture；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · DT-SW-RECT-1800

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · DT-SW-RECT-1800

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · DT-SW-RECT-1800打开导出工具

页面快速操作

发布采购询价

产品描述

This fixed non-extendable rectangular dining table features a clean minimalist form defined by its straight, linear silhouette and four matching square legs, built for unobtrusive integration across a range of spaces. The tabletop carries softly rounded eased edges around its full perimeter, with no central crossbar under the surface to preserve open, unobstructed legroom for seated users. The consistent natural matte wood finish unifies the tabletop, apron frame, and legs for a cohesive, understated visual profile that aligns with casual, natural interior design schemes. The table is constructed from solid rubberwood across its core structural components: the tabletop uses edge-glued rubberwood planks, supported by a solid rubberwood horizontal apron frame connected to square-section solid rubberwood legs. Joints are secured with zinc-plated steel bolt connectors, wood dowels, and steel corner brackets at apron-leg intersections for stable, rigid structure. The surface is protected by a clear water-based polyurethane matte coating, with non-slip PE pads fitted to each leg base. Assembly is completed via knockdown attachment of legs to the pre-built apron frame using all included hardware, with adjustable foot pads offering minor height leveling to accommodate uneven floor surfaces. The foot pads also prevent scratches on hardwood and tile flooring, while integrated cable management capacity supports organized routing of power and data cables when the table is used for work purposes. The table seats six people comfortably for regular dining use, and delivers stable static load performance for everyday items placed across its surface. It is well suited for primary residential dining rooms, compact open-plan kitchen dining zones in small apartments, and furnished rental properties where durable solid wood construction holds up to regular, high-turnover use. It also functions as a spacious work surface for casual home office projects or group collaborative work, and works appropriately for light commercial applications such as small office break rooms or low-capacity casual event spaces. Procurement teams and buyers should note the product ships across two cartons per set, with a straightforward assembly process suitable for on-site setup without specialized tools. The fixed non-extendable structure means buyers should confirm the fixed footprint matches available floor space prior to purchase, as the table does not expand to accommodate extra seating. The unbranded design allows for flexible pairing with a wide range of dining chair styles without brand-driven aesthetic constraints.

Natural Solid Wood Rectangular Dining Table with Four Square Legs Specifications

供应商与现货