纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1800 × 800 × 750 mm
Overall table dimensions	1800 x 800 x 750 mm
Tabletop slab thickness	45 mm
Leg panel wall thickness	50 mm
Embedded tea tray zone dimensions	800 x 400 mm
Sintered stone inlay width	350 mm
Leg circular cutout diameter	180 mm
Chair seat height	450 mm
Under-table knee clearance height	680 mm
Clearance between two support legs	1200 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Table static distributed load capacity	150 kg
Recommended maximum seating capacity	6 users
Sintered stone surface heat resistance	180 °C
Set total net weight	185 kg
Wood frame moisture content	12%
Finish abrasion resistance cycles	2000 cycles
Integrated electric boiler load rating	1500 W
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Table frame and legs	Walnut-toned solid hardwood, matte clear lacquer finish
Tabletop center inlay	Polished light gray sintered stone, 12mm thickness
Integrated tea tray	Polished black natural Wujin stone, slotted drainage design
Chair frames	Matching solid hardwood, mortise and tenon joinery
Chair seat panels	Solid wood veneered engineered wood panel, clear lacquer finish
Table edge trim	Solid wood edge banding, rounded corner profile
Structural connectors	Zinc-plated steel hardware, hex head bolts
Protective foot pads	Non-slip 5mm thick rubber pads, floor-protecting design
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Integrated tea service zone	Recessed fixed black stone tray with dedicated space for boiler, teaware and drainage
Built-in electric boiling station	Embedded induction cooker compatible with standard glass teapots for water heating
Concealed wastewater routing	Hidden drainage channel connecting tea tray to under-table removable wastewater bucket
Four-sided seating access	Open under-table space with no central obstruction to accommodate seating on all sides
Decorative leg cutouts	Circular open cutouts on both end box legs for aesthetic and weight reduction
Scratch-resistant work surface	Sintered stone inlay resists scratches and heat from daily tea preparation use
Stackable chair storage	Chairs designed to tuck fully under the table when not in use to save space
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Home tea room	Suitable for dedicated home tea spaces for daily kung fu tea practice and small family gatherings
Office reception area	Appropriate for executive office reception zones to host visiting clients for tea service
Commercial tea house	Durable enough for light commercial use in private tea house booths and lounge areas
Living room accent set	Functions as a multi-purpose dining and tea table in open-plan new Chinese style living rooms
Recommended matching accessories	Pairs with ceramic tea sets, small potted plants, and fabric floor rugs to complete the zen interior aesthetic

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Furniture - Strength, durability and safety for domestic dining tables, applicable to structural performance
EN 1022:2018	Furniture - Seating - Determination of stability, applicable to included armchairs
EN 16139:2013	Furniture - Strength, durability and safety for non-domestic seating, applicable for public reception use

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to solid wood table and chair frames
GB/T 4893.1-2021	Surface wear resistance test method for furniture finishes, applicable to lacquered wood surfaces
GB 18584-2001	Limit of harmful substances in wooden furniture, applicable for formaldehyde emission control
GB/T 35607-2017	Green product assessment standard for furniture, applicable for environmentally friendly material selection

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to solid wood table and chair frames；
2. GB/T 4893.1-2021：Surface wear resistance test method for furniture finishes, applicable to lacquered wood surfaces；
3. GB 18584-2001：Limit of harmful substances in wooden furniture, applicable for formaldehyde emission control；
4. GB/T 35607-2017：Green product assessment standard for furniture, applicable for environmentally friendly material selection；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · NCS-TT1800-WS-5C

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · NCS-TT1800-WS-5C

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · NCS-TT1800-WS-5C打开导出工具

页面快速操作

发布采购询价

产品描述

This unbranded New Chinese Style Solid Wood Kung Fu Tea Dining Table Set, model NCS-TT1800-WS-5C, blends traditional aesthetic sensibilities with versatile multi-use functionality, designed to support both formal tea service and casual dining. Visually, the set pairs warm walnut-toned solid hardwood framing with a contrasting mixed-material tabletop: the smooth wood surface is accented by a polished light gray sintered stone inlay running across the center, set against a recessed polished black natural Wujin stone integrated tea tray. Rounded solid wood edge trim softens the table perimeter, while circular cutouts on the box-style end legs add subtle decorative detail and reduce overall visual weight. Matching solid wood chairs align with the frame’s matte clear lacquer finish, tucking fully under the table when not in use to maintain a clean, uncluttered layout across dining or reception spaces. The solid wood frame is finished with matte clear lacquer, stabilized with zinc-plated steel hex head bolts, and fitted with 5mm thick non-slip rubber foot pads to protect finished flooring. Chairs use traditional mortise and tenon joinery for long-term structural stability, with seat panels finished in clear lacquer over solid wood veneered engineered wood. The 45mm thick tabletop incorporates a 12mm sintered stone inlay rated to resist 180°C surface heat and daily scratches from tea preparation, supported by 50mm thick leg panels built to hold a 150kg static distributed load, with the wood frame maintained at 12% moisture content to resist warping. The finish withstands 2000 abrasion cycles for durable daily use. Core functional design centers on seamless kung fu tea service: the recessed Wujin stone tea tray features slotted drainage connected via hidden channels to an under-table removable wastewater bucket, with dedicated built-in space for a 1500W electric boiling station compatible with standard glass teapots for water heating. Open, obstruction-free under-table space allows four-sided seating access, supporting a maximum of 6 users at a time, while the chairs’ stackable, tuck-away design reduces footprint when the table is not in use. The set suits a range of spaces, including dedicated home tea rooms for daily practice and small family gatherings, executive office reception areas for hosting clients, light commercial private booths in tea houses, and open-plan living rooms where it serves as both a dining table and decorative new Chinese style accent. It pairs naturally with ceramic tea sets, small potted plants, and fabric floor rugs to complete a calm, zen-focused interior aesthetic. For procurement, note the set ships as 1 unit across 2 cartons, with a 40-minute assembly time per unit, a total net weight of 185kg, and packaged gross weight of 90kg across both cartons. The packaged volume is 0.55 m³ per set, with individual package dimensions of 2100 x 1100 x 300 mm for delivery and storage planning.

New Chinese Style Solid Wood Kung Fu Tea Dining Table Set with Integrated Stone Tea Tray Specifications

供应商与现货