| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 1800 x 800 x 750 mm | |
|---|---|---|
| Tabletop slab thickness | 45 mm | |
| Leg panel wall thickness | 50 mm | |
| Embedded tea tray zone dimensions | 800 x 400 mm | |
| Sintered stone inlay width | 350 mm | |
| Leg circular cutout diameter | 180 mm | |
| Chair seat height | 450 mm | |
| Chair overall dimensions | 550 x 500 x 820 mm | |
| Under-table knee clearance height | 680 mm | |
| Clearance between two support legs | 1200 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Table static distributed load capacity | 150 kg | |
|---|---|---|
| Recommended maximum seating capacity | 6 users | |
| Sintered stone surface heat resistance | 180 °C | |
| Set total net weight | 185 kg | |
| Wood frame moisture content | 12% | |
| Finish abrasion resistance cycles | 2000 cycles | |
| Integrated electric boiler load rating | 1500 W | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table frame and legs | Walnut-toned solid hardwood, matte clear lacquer finish | |
|---|---|---|
| Tabletop center inlay | Polished light gray sintered stone, 12mm thickness | |
| Integrated tea tray | Polished black natural Wujin stone, slotted drainage design | |
| Chair frames | Matching solid hardwood, mortise and tenon joinery | |
| Chair seat panels | Solid wood veneered engineered wood panel, clear lacquer finish | |
| Table edge trim | Solid wood edge banding, rounded corner profile | |
| Structural connectors | Zinc-plated steel hardware, hex head bolts | |
| Protective foot pads | Non-slip 5mm thick rubber pads, floor-protecting design | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Integrated tea service zone | Recessed fixed black stone tray with dedicated space for boiler, teaware and drainage | |
|---|---|---|
| Built-in electric boiling station | Embedded induction cooker compatible with standard glass teapots for water heating | |
| Concealed wastewater routing | Hidden drainage channel connecting tea tray to under-table removable wastewater bucket | |
| Four-sided seating access | Open under-table space with no central obstruction to accommodate seating on all sides | |
| Decorative leg cutouts | Circular open cutouts on both end box legs for aesthetic and weight reduction | |
| Scratch-resistant work surface | Sintered stone inlay resists scratches and heat from daily tea preparation use | |
| Stackable chair storage | Chairs designed to tuck fully under the table when not in use to save space | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Home tea room | Suitable for dedicated home tea spaces for daily kung fu tea practice and small family gatherings | |
|---|---|---|
| Office reception area | Appropriate for executive office reception zones to host visiting clients for tea service | |
| Commercial tea house | Durable enough for light commercial use in private tea house booths and lounge areas | |
| Living room accent set | Functions as a multi-purpose dining and tea table in open-plan new Chinese style living rooms | |
| Recommended matching accessories | Pairs with ceramic tea sets, small potted plants, and fabric floor rugs to complete the zen interior aesthetic |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic dining tables, applicable to structural performance | |
|---|---|---|
| EN 1022:2018 | Furniture - Seating - Determination of stability, applicable to included armchairs | |
| EN 16139:2013 | Furniture - Strength, durability and safety for non-domestic seating, applicable for public reception use |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to solid wood table and chair frames | |
|---|---|---|
| GB/T 4893.1-2021 | Surface wear resistance test method for furniture finishes, applicable to lacquered wood surfaces | |
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable for formaldehyde emission control | |
| GB/T 35607-2017 | Green product assessment standard for furniture, applicable for environmentally friendly material selection |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to solid wood table and chair frames; 2. GB/T 4893.1-2021: Surface wear resistance test method for furniture finishes, applicable to lacquered wood surfaces; 3. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable for formaldehyde emission control; 4. GB/T 35607-2017: Green product assessment standard for furniture, applicable for environmentally friendly material selection; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
