纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2400 × 900 × 750 mm
tabletop thickness	80 mm
embedded tea tray size	900 x 450 mm
knee clearance under table	670 mm
edge radius on tabletop	5 mm
left sintered stone pedestal size	600 x 450 x 700 mm
right solid wood pedestal size	400 x 350 x 700 mm
boiler station indent size	400 x 300 mm
floor clearance under pedestal	0 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

table net weight	150 kg
tabletop uniform static load	200 kg
tea tray drainage flow rate	2 L/min
seating capacity	6 people
design service life	10 years
surface water resistance rating	Level 4
surface abrasion resistance	2000 cycles
seating capacity per side	2 chairs on long sides, 1 chair on each short end
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

tabletop slab	North American black walnut solid wood with clear water-based polyurethane finish
left support pedestal	Polished natural marble/sintered stone slab with sealed textured surface
right support pedestal	Solid laminated wood block with matching walnut veneer and matte finish
embedded tea tray	Black polished natural stone with sloped drainage channel and brass drain fitting
kettle station platform	Textured sintered stone inset with heat-resistant surface
edge treatment	Hand-sanded rounded edges with sealed finish, no sharp corners
pedestal connection hardware	Zinc-plated steel corner brackets with M10 mounting bolts
floor protection pads	8 mm thick non-slip rubber pads under each pedestal base
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

integrated tea drainage system	Sloped tea tray connects to hidden waste water pipe routed to under-table bucket
integrated boiler mounting	Recessed left station accommodates embedded electric glass kettle with concealed power cord routing
pedestal structural design	Dual asymmetric pedestal bases eliminate crossbars, 360-degree unobstructed legroom for seated users
fixed height design	750 mm working height optimized for standard 450 mm seat height dining/tea chairs
surface maintenance design	Smooth sealed non-porous surfaces allow wipe-clean of tea stains and spills without waxing
multi-use adaptability	Table supports formal tea ceremony, small business meetings, and casual dining for six users
concealed cable routing	Hidden channel under tabletop routes power cord for electric kettle without surface clutter
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

private residential tea room	Designed for home tea ceremony, guest reception and family casual dining
office executive reception area	Suitable for small business meetings and client reception in corporate settings
tea house private booth	Meets commercial durability requirements for frequent daily tea service use
clubhouse lounge space	Fits senior living and private club social activity spaces
recommended matching seating	1 host armchair plus 5 guest armchairs with linen upholstery
floor type compatibility	Suitable for tile, polished concrete, solid wood and engineered wood flooring

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Strength, durability and stability requirements for domestic dining tables
EN 13722:2004	Test methods for surface resistance to cold liquids for furniture finishes

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements applicable to wooden general furniture strength and stability
GB 18584-2001	Formaldehyde emission limit requirement for indoor wooden furniture finishes
GB/T 4893.4-2013	Surface abrasion resistance test method applicable to painted wood tabletops
GB/T 4893.9-2013	Surface cigarette burn resistance test applicable to heat-resistant tea service surfaces

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements applicable to wooden general furniture strength and stability；
2. GB 18584-2001：Formaldehyde emission limit requirement for indoor wooden furniture finishes；
3. GB/T 4893.4-2013：Surface abrasion resistance test method applicable to painted wood tabletops；
4. GB/T 4893.9-2013：Surface cigarette burn resistance test applicable to heat-resistant tea service surfaces；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · TC-NC-2400STW

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · TC-NC-2400STW

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · TC-NC-2400STW打开导出工具

页面快速操作

发布采购询价

产品描述

The New Chinese Style Mixed Pedestal Tea Ceremony Meeting Table, model TC-NC-2400STW, is an unbranded dual-purpose tea ceremony and dining table built to balance cultural aesthetic, functional utility, and durable construction. Its visual design anchors to an asymmetric mixed-material pedestal layout: a substantial solid wood tabletop sits atop a wider polished sintered stone left pedestal and a narrower solid wood right pedestal, with no obstructive crossbars to break the clean, streamlined silhouette. The tabletop features hand-sanded, soft rounded edges with no sharp corners, finished in a clear water-based polyurethane that highlights the natural North American black walnut grain, while the matte walnut veneer on the right pedestal creates cohesive visual continuity with the top. An embedded black polished natural stone tea tray sits flush with the table surface, paired with a recessed textured sintered stone boiler station to the left, creating a purpose-built but uncluttered tea service zone.
Construction blends premium, wear-resistant materials with robust hardware: the 80mm thick solid wood tabletop is supported by zinc-plated steel corner brackets and M10 mounting bolts securing the two pedestals, each fitted with thick non-slip rubber floor protection pads to prevent surface damage. The embedded tea tray includes an integrated sloped drainage channel and brass drain fitting, routed through a hidden waste pipe to an under-table collection bucket, with a 2L per minute drainage flow rate to handle regular tea service. The recessed left boiler station accommodates an embedded electric glass kettle, with concealed under-table cable routing to eliminate surface cord clutter. The dual asymmetric pedestal design delivers 360-degree unobstructed legroom, with a fixed 750mm working height optimized for standard seat height chairs, and 670mm of knee clearance for comfortable seating for six people. Smooth, sealed non-porous surfaces resist water and abrasion, allowing simple wipe-clean maintenance for tea stains and spills without regular waxing, with a rated design service life suited to frequent use.
This table fits a range of residential and commercial spaces: private home tea rooms for guest reception and family casual dining, office executive reception areas for small client meetings, private tea house booths for daily service, and clubhouse lounge spaces for social gatherings. It is compatible with tile, polished concrete, solid wood, and engineered wood flooring, and pairs best with a set of one host armchair and five linen-upholstered guest armchairs for a cohesive setup. Procurement teams and buyers should note the product ships in two cartons per set, with a 40-minute assembly time per unit, and plan for appropriate handling support given the unit’s net weight. No additional surface treatment is required post-assembly for regular use.

New Chinese Style Mixed Pedestal Tea Ceremony Meeting Table with Integrated Drainage Tea Tray Specifications

供应商与现货