New Chinese Style Mixed Pedestal Tea Ceremony Meeting Table with Integrated Drainage Tea Tray (model TC-NC-2400STW) is listed under Tea station table. Dimensions: 2400 × 900 × 750 mm. Materials: North American black walnut solid wood with clear water-based polyurethane finish. Load capacity: 200 kg. Product Features: new,Chinese,style,fixed,pedestal,base,integrated,tea,system,mixed,material,construction. This page consolidates 6 groups of specifications and GB / EN standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | JUESHANGDA | Model | TC-NC-2400STW |
| Overall dimensions (W × D × H) | 2400 × 900 × 750 mm | tabletop thickness | 80 mm |
| embedded tea tray size | 900 x 450 mm | knee clearance under table | 670 mm |
| edge radius on tabletop | 5 mm | left sintered stone pedestal size | 600 x 450 x 700 mm |
| right solid wood pedestal size | 400 x 350 x 700 mm | boiler station indent size | 400 x 300 mm |
| floor clearance under pedestal | 0 mm | Finished Top Thickness | 45 mm |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | Leg / Support Section | 80 mm main section with 2 mm metal wall |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm | table net weight | 150 kg |
| tabletop uniform static load | 200 kg | tea tray drainage flow rate | 2 L/min |
| seating capacity | 6 people | design service life | 10 years |
| surface water resistance rating | Level 4 | surface abrasion resistance | 2000 cycles |
| seating capacity per side | 2 chairs on long sides, 1 chair on each short end | Top Static Load Reference | 150 kg uniformly distributed |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | tabletop slab | North American black walnut solid wood with clear water-based polyurethane finish |
| left support pedestal | Polished natural marble/sintered stone slab with sealed textured surface | right support pedestal | Solid laminated wood block with matching walnut veneer and matte finish |
| embedded tea tray | Black polished natural stone with sloped drainage channel and brass drain fitting | kettle station platform | Textured sintered stone inset with heat-resistant surface |
| edge treatment | Hand-sanded rounded edges with sealed finish, no sharp corners | pedestal connection hardware | Zinc-plated steel corner brackets with M10 mounting bolts |
| floor protection pads | 8 mm thick non-slip rubber pads under each pedestal base | Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up |
| Edge Band Thickness | 2 mm | Metal Frame Wall Thickness | 2 mm cold-rolled steel |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | integrated tea drainage system | Sloped tea tray connects to hidden waste water pipe routed to under-table bucket |
| integrated boiler mounting | Recessed left station accommodates embedded electric glass kettle with concealed power cord routing | pedestal structural design | Dual asymmetric pedestal bases eliminate crossbars, 360-degree unobstructed legroom for seated users |
| fixed height design | 750 mm working height optimized for standard 450 mm seat height dining/tea chairs | surface maintenance design | Smooth sealed non-porous surfaces allow wipe-clean of tea stains and spills without waxing |
| multi-use adaptability | Table supports formal tea ceremony, small business meetings, and casual dining for six users | concealed cable routing | Hidden channel under tabletop routes power cord for electric kettle without surface clutter |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
| Reference Package Count | 1 set / 2 cartons | Reference Assembly Time | 40 minutes per set |
| Reference Package Dimensions | 2100× 1100× 300 mm | Reference Packaged Gross Weight | 90 kg/set in 2 cartons |
| Reference Packaging Volume | 0.55 m³/set | private residential tea room | Designed for home tea ceremony, guest reception and family casual dining |
| office executive reception area | Suitable for small business meetings and client reception in corporate settings | tea house private booth | Meets commercial durability requirements for frequent daily tea service use |
| clubhouse lounge space | Fits senior living and private club social activity spaces | recommended matching seating | 1 host armchair plus 5 guest armchairs with linen upholstery |
| floor type compatibility | Suitable for tile, polished concrete, solid wood and engineered wood flooring | — | — |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2400 × 900 × 750 mm | |
|---|---|---|
| tabletop thickness | 80 mm | |
| embedded tea tray size | 900 x 450 mm | |
| knee clearance under table | 670 mm | |
| edge radius on tabletop | 5 mm | |
| left sintered stone pedestal size | 600 x 450 x 700 mm | |
| right solid wood pedestal size | 400 x 350 x 700 mm | |
| boiler station indent size | 400 x 300 mm | |
| floor clearance under pedestal | 0 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| table net weight | 150 kg | |
|---|---|---|
| tabletop uniform static load | 200 kg | |
| tea tray drainage flow rate | 2 L/min | |
| seating capacity | 6 people | |
| design service life | 10 years | |
| surface water resistance rating | Level 4 | |
| surface abrasion resistance | 2000 cycles | |
| seating capacity per side | 2 chairs on long sides, 1 chair on each short end | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| tabletop slab | North American black walnut solid wood with clear water-based polyurethane finish | |
|---|---|---|
| left support pedestal | Polished natural marble/sintered stone slab with sealed textured surface | |
| right support pedestal | Solid laminated wood block with matching walnut veneer and matte finish | |
| embedded tea tray | Black polished natural stone with sloped drainage channel and brass drain fitting | |
| kettle station platform | Textured sintered stone inset with heat-resistant surface | |
| edge treatment | Hand-sanded rounded edges with sealed finish, no sharp corners | |
| pedestal connection hardware | Zinc-plated steel corner brackets with M10 mounting bolts | |
| floor protection pads | 8 mm thick non-slip rubber pads under each pedestal base | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| integrated tea drainage system | Sloped tea tray connects to hidden waste water pipe routed to under-table bucket | |
|---|---|---|
| integrated boiler mounting | Recessed left station accommodates embedded electric glass kettle with concealed power cord routing | |
| pedestal structural design | Dual asymmetric pedestal bases eliminate crossbars, 360-degree unobstructed legroom for seated users | |
| fixed height design | 750 mm working height optimized for standard 450 mm seat height dining/tea chairs | |
| surface maintenance design | Smooth sealed non-porous surfaces allow wipe-clean of tea stains and spills without waxing | |
| multi-use adaptability | Table supports formal tea ceremony, small business meetings, and casual dining for six users | |
| concealed cable routing | Hidden channel under tabletop routes power cord for electric kettle without surface clutter | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| private residential tea room | Designed for home tea ceremony, guest reception and family casual dining | |
|---|---|---|
| office executive reception area | Suitable for small business meetings and client reception in corporate settings | |
| tea house private booth | Meets commercial durability requirements for frequent daily tea service use | |
| clubhouse lounge space | Fits senior living and private club social activity spaces | |
| recommended matching seating | 1 host armchair plus 5 guest armchairs with linen upholstery | |
| floor type compatibility | Suitable for tile, polished concrete, solid wood and engineered wood flooring |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Strength, durability and stability requirements for domestic dining tables | |
|---|---|---|
| EN 13722:2004 | Test methods for surface resistance to cold liquids for furniture finishes |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements applicable to wooden general furniture strength and stability | |
|---|---|---|
| GB 18584-2001 | Formaldehyde emission limit requirement for indoor wooden furniture finishes | |
| GB/T 4893.4-2013 | Surface abrasion resistance test method applicable to painted wood tabletops | |
| GB/T 4893.9-2013 | Surface cigarette burn resistance test applicable to heat-resistant tea service surfaces |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements applicable to wooden general furniture strength and stability; 2. GB 18584-2001: Formaldehyde emission limit requirement for indoor wooden furniture finishes; 3. GB/T 4893.4-2013: Surface abrasion resistance test method applicable to painted wood tabletops; 4. GB/T 4893.9-2013: Surface cigarette burn resistance test applicable to heat-resistant tea service surfaces; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp