This unbranded high-back winged 3-seat booth sofa, model HBW-BOOTH-3S-2250-DG, features a streamlined dark charcoal grey horizontal channel-tufted form balanced by polished chrome metal cantilever sled legs, designed to deliver semi-enclosed seating in open shared spaces. The sofa sits at an overall dimension of 2250mm wide, 750mm deep, and 1400mm tall, with evenly spaced 750mm per-seat width to comfortably accommodate three adults. Matching full-height end wings extend 920mm from the seat surface, aligned perfectly with the tall backrest to create a cohesive enclosed seating profile, while the 150mm under-seat clearance lends a light, uncluttered visual presence despite the booth’s substantial height. Built for consistent high-traffic commercial use, the sofa’s inner structure combines a kiln-dried solid wood and 15mm plywood frame, supported by zig-zag metal springs topped with 45kg/m³ high-resilience polyurethane foam that delivers a 45% rebound rate for lasting seated comfort. The upholstery uses dark charcoal grey woven polyester fabric rated for 50000 Martindale abrasion cycles, secured with reinforced polyester thread stitched at a 30mm seam pitch for long-term durability. Legs are constructed from polished chrome-plated steel, fitted with non-marking plastic glides to prevent scratching hard floor surfaces. Cushioning uses high-density foam to maintain shape over extended use, and thick upholstered panels deliver an NRC 0.35 acoustic damping rating to reduce peripheral ambient noise, while the full-height wings and tall back block external visual distractions to support quiet, focused conversations. The sofa arrives in knock-down configuration, with polished metal legs attaching simply to the pre-upholstered body for a 40-minute per-set assembly time, packaged across two cartons with a total packaged gross weight of 110kg. It is ideally suited for open plan office quiet zones, where it provides semi-enclosed private seating for quick informal meetings without the cost and construction required for full enclosed privacy pods, as well as co-working space lounge areas where it creates defined, welcoming small meeting nooks in flexible shared work environments. When planning procurement, note the 300kg total static load capacity, 85kg net product weight, and required clearances to ensure the unit fits allocated space without obstructing walkways, and account for the 1.8m³ packaging volume when coordinating delivery and on-site storage prior to installation.