This Two-Tone Modular Office Public Lounge Seating Set, model MLS-10PC-GYGR-MTL, is an unbranded 10-person modular seating solution designed for high-traffic public and semi-public spaces. Its visually distinct design pairs light grey woven polyester seat upholstery with lime green woven polyester backrest upholstery, creating a modern, approachable two-tone aesthetic. The set combines a linear bench module with a 6-seat circular cluster, offering a total footprint of 3200 x 2400 x 740 mm; individual units measure 600 mm wide for linear seats and 580 mm at the outer edge for circular wedge seats, with a 470 mm seat height, 270 mm backrest height above the seat surface, and 127 mm thick seat and back cushions. The circular cluster measures 2200 mm in diameter, while the linear bench module spans 2400 x 700 x 740 mm. Constructed for long-term commercial use, the set features contract-grade woven fabric upholstery with reinforced polyester stitching at 8mm stitch pitch, rated for 50000 Martindale abrasion cycles, and a tight weave that resists staining to support easy upkeep in busy areas. Inner frames combine kiln-dried solid wood with 15mm plywood, supporting 45 kg/m³ high-density polyurethane seat foam and 35 kg/m³ medium-density polyurethane back foam that delivers a 45% rebound rate, with low-profile backrests shaped to provide upright lumbar support for short-term waiting. 18mm diameter tapered black powder-coated steel legs are fitted with non-slip thermoplastic rubber foot pads to prevent lateral wobble on hard flooring, and zinc-plated steel bracket connectors link individual units securely. The set supports flexible configurations: linkable units can be arranged into linear, island, or curved layouts, with the circular cluster configured for inward-facing collaborative seating, and the linear bench usable as either a free-standing unit or wall-mounted installation. Units separate via hidden connectors for flat-packed shipping, arriving in 2 cartons per set with a 40-minute assembly time per unit. Each seat supports a 136 kg static load, and the full set weighs 185 kg net. This seating set is suited for office lobbies and waiting areas, open office collaborative zones, libraries, hospital waiting zones, government service halls, co-working common areas, campus common rooms, and reception breakout areas, with durable construction that withstands heavy daily traffic. Procurement teams can note the 135-set loading capacity for 20GP containers at 85% space utilization to support bulk order planning, and account for the set’s modular flexibility to adapt layouts to evolving space needs over time.