纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	3200 × 1200 × 750 mm
Tabletop thickness	38 mm
Perimeter edge trim width	20 mm
Under-table knee clearance height	690 mm
Under-table knee clearance depth	1100 mm
Leg assembly splay width at floor	800 mm
Leg tube cross-section	80 x 40 mm
Corner radius of tabletop edges	50 mm
Foot contact pad length	120 mm
Per-seat linear width allocation	750 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Static distributed tabletop load capacity	600 kg
Net product weight (reference)	145 kg
Standard seating capacity	8 people
Edge impact resistance	200 N
Surface abrasion resistance	2000 cycles
Adjustable foot height adjustment range	10 mm
Finish formaldehyde emission grade	E0
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop core	E0-grade high-density particleboard
Tabletop surface finish	Matte walnut woodgrain high-pressure laminate
Perimeter edge trim	Brushed silver aluminum alloy bevel
Leg support structure	1.5 mm thick brushed silver finished steel tube
Leg connection brackets	2.5 mm thick powder-coated steel plates
Foot pads	Non-slip nylon glide pads
Fastener hardware	Grade 8.8 zinc-plated steel bolts
Inner support frame	1.2 mm thick steel cross beams
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Open under-table layout	No central modesty panel obstruction
Floor leveling function	Threaded adjustable feet on each leg
Modular cable management compatibility	Pre-drilled port positions accept optional cable grommets
Knock-down assembly design	Two leg assemblies attach to pre-drilled tabletop
Seating configuration flexibility	Supports equal spacing of office chairs around all sides
Edge protection design	Continuous beveled metal/ABS edge
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Corporate boardrooms	8-person capacity for executive meetings, formal professional appearance for client engagements
Open-plan office meeting zones	Sleek modern design complements contemporary open office interiors
Training and seminar spaces	Large work surface holds laptops, notepads and presentation materials for group sessions
Hotel conference facilities	Durable commercial construction for high-traffic guest meeting use
Client reception meeting areas	Walnut and silver finish conveys professional brand image for visitor meetings
Project team collaboration spaces	Unobstructed legroom and wide surface supports team brainstorming and document review

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-1:2011	Office work tables and desks, applicable to structural stability and safety requirements
EN 15372:2016	Furniture - Strength, durability and safety for non-domestic tables, commercial use standard
EN 13722:2004	Furniture - Test methods for table stability, applicable to splayed leg structure verification

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.5-2021	Standard for desk products, applicable to table load, stability and durability testing for office use
ANSI/BIFMA X7.1-2022	Standard for formaldehyde and TVOC emissions, applicable to low-emission office furniture acceptance

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to tabletop panel performance
GB/T 3327-2016	Test methods for furniture tables, applicable to structural stability and load testing
GB 18584-2001	Limit of formaldehyde emission for wooden furniture, applicable to panel material acceptance
GB/T 4893.8-2013	Surface wear resistance test for furniture finishes, applicable to laminate durability verification

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to tabletop panel performance；
2. GB/T 3327-2016：Test methods for furniture tables, applicable to structural stability and load testing；
3. GB 18584-2001：Limit of formaldehyde emission for wooden furniture, applicable to panel material acceptance；
4. GB/T 4893.8-2013：Surface wear resistance test for furniture finishes, applicable to laminate durability verification；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CT-WN3200-SL

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CT-WN3200-SL

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CT-WN3200-SL打开导出工具

页面快速操作

发布采购询价

产品描述

The Modern Rectangular Walnut-Grain Conference Table with Brushed Silver Splayed Legs, model CT-WN3200-SL, delivers a polished, professional presence tailored to commercial work environments, with a streamlined rectangular form defined by softly rounded 50mm radius corners, continuous brushed silver beveled edge trim, and outward-splayed silver metal legs that create an open, visually balanced silhouette. The 3200 x 1200 x 750 mm table features a 38mm thick tabletop built on an E0-grade high-density particleboard core, topped with a matte walnut woodgrain high-pressure laminate surface for a warm, refined wood look without the maintenance demands of solid hardwood. Structural components include 1.5mm thick brushed silver steel tube legs with 80 x 40mm cross-sections, connected to the tabletop via 2.5mm thick powder-coated steel brackets and reinforced by 1.2mm thick internal steel cross beams for lasting stability. Perimeter trim uses brushed silver aluminum alloy, while non-slip nylon glide pads with 10mm of threaded height adjustment sit at each leg base, secured with Grade 8.8 zinc-plated steel bolts. The open under-table layout eliminates central modesty panel obstructions, offering 690mm of knee clearance height and 1100mm of clearance depth to support comfortable seating for 8 people, with equal spacing possible around all table sides. Pre-drilled port positions accommodate optional cable grommets, with internal capacity to route 10 power or data cables and support a 10kg cable tray. The tabletop supports 600kg of static distributed load, resists 200N of edge impact, and withstands 2000 abrasion cycles for durable daily use. It fits equally well in corporate boardrooms for executive meetings and client engagements, open-plan office meeting zones, training and seminar spaces holding laptops and presentation materials, high-traffic hotel conference facilities, client reception areas, and project team collaboration spaces for brainstorming and document review. For procurement, note the knock-down design ships in 2 cartons per set, requires 40 minutes of assembly time, and has no attached brand marking, making it adaptable to diverse commercial interior design schemes.

Modern Rectangular Walnut-Grain Conference Table with Brushed Silver Splayed Legs Specifications

供应商与现货