商品供应商Two-Tone Rectangular 6-Person Office Conference Table with Splayed Steel Legs，Light wood-grain melamine laminate over E1 grade MDF core
可联系供应商获取生产周期与报价。
PRODUCT MODULE 01 / 06
基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源：工厂资料结构化字段，最终以实测值为准
| 产品外部尺寸（宽 × 深 × 高） | 2400 × 1200 × 750 mm | |
|---|---|---|
| Tabletop thickness | 38 mm | |
| Leg splay angle from vertical | 18 degrees | |
| End dark panel length (each end) | 300 mm | |
| Long-side under-table knee clearance height | 690 mm | |
| Adjustable leveling foot height adjustment range | 15 mm | |
| Leg spacing along long sides | 800 mm | |
| Corner radius (rounded tabletop edges) | 30 mm | |
| Leg tube diameter | 60 mm | |
| Cross-side seated knee clearance width | 1100 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源：产品性能数据，采购前请核对具体测试口径
| Total tabletop static load capacity | 300 kg | |
|---|---|---|
| Seating capacity | 6 persons | |
| Surface scratch resistance rating | 2000 cycles | |
| Net product weight | 75 kg | |
| Surface heat resistance (short contact) | 120 °C | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
PRODUCT MODULE 03 / 06
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源：以工厂材质清单与验货报告为准
| Tabletop central section | Light wood-grain melamine laminate over E1 grade MDF core | |
|---|---|---|
| Tabletop end panels | Matte black melamine laminate over matching composite core | |
| Table edge banding | 2 mm thick black PVC edge trim with rounded profile | |
| Support legs | Powder-coated matte black steel tube with textured finish | |
| Leveling feet | Chrome-plated steel threaded stem with non-slip rubber pad | |
| Core panel density | 720 kg/m³ | |
| Surface coating (legs) | Epoxy polyester powder coat, 60 micron thickness | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
PRODUCT MODULE 04 / 06
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源：功能配置参数，以供应商正式规格为准
| Leveling adjustment | Threaded steel feet adjust 15 mm vertically to stabilize on uneven floors | |
|---|---|---|
| Seating access | Open understructure without modesty panels allows seating on all four sides | |
| Surface function | Smooth non-porous laminate surface supports writing, laptop use and document layout | |
| Leg stability design | Splayed leg geometry distributes load outward to reduce wobble during meetings | |
| Floor protection | Rubber pads on leveling feet prevent hard floor scratching and skidding | |
| Assembly configuration | Knock-down leg attachment to pre-finished tabletop for on-site assembly | |
| Cable management compatibility | Pre-drilled leg mounts support optional under-table cable clips | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源：外贸报价与装柜测算参考
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源：依据产品结构与品类整理的推荐应用场景
| Small corporate meeting rooms | Fits 6 attendees for team meetings and project reviews | |
|---|---|---|
| Open office collaborative zones | Low-profile open design supports informal group work and huddles | |
| Training and seminar spaces | Durable scratch-resistant surface withstands frequent daily use | |
| Small startup workspaces | Modern two-tone finish matches contemporary open-plan office aesthetics | |
| Home office multi-use spaces | Standard 750mm height pairs with standard office task chairs |
STANDARD S1
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
| Office furniture strength and stability | EN 15372:2016 level 2 for contract office use | |
|---|---|---|
| Laminate surface wear resistance | EN 438:2016 abrasion resistance ≥350 revolutions |
STANDARD S2
北美市场采购验货参考 * ANSI/BIFMA 标准
美国及加拿大家具标准
| Conference table static load test | ANSI/BIFMA X2021desk/table vertical load test 136 kg per 760mm | |
|---|---|---|
| Table leg stability test | ANSI/BIFMA X2021horizontal stability 156 N force at table edge |
STANDARD S3
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| Tabletop formaldehyde emission | GB/T 17657E1 limit ≤0.124 mg/m³ | |
|---|---|---|
| Furniture stability | GB/T 10357.1vertical and horizontal load stability test | |
| Surface coating adhesion | GB/T 4893.4cross-cut adhesion grade 1 minimum |
招标文件标准化描述文本
本产品须满足以下技术参数要求： 1. Tabletop formaldehyde emission：GB/T 17657E1 limit ≤0.124 mg/m³； 2. Furniture stability：GB/T 10357.1vertical and horizontal load stability test； 3. Surface coating adhesion：GB/T 4893.4cross-cut adhesion grade 1 minimum； 最终交付参数、检测报告和验收标准以双方采购合同为准。
GENERATED EXPORTS
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告，可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块，文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具