| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2400 x 1200 x 750 mm | |
|---|---|---|
| Tabletop thickness | 38 mm | |
| Leg splay angle from vertical | 18 degrees | |
| End dark panel length (each end) | 300 mm | |
| Long-side under-table knee clearance height | 690 mm | |
| Adjustable leveling foot height adjustment range | 15 mm | |
| Leg spacing along long sides | 800 mm | |
| Corner radius (rounded tabletop edges) | 30 mm | |
| Leg tube diameter | 60 mm | |
| Cross-side seated knee clearance width | 1100 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total tabletop static load capacity | 300 kg | |
|---|---|---|
| Seating capacity | 6 persons | |
| Surface scratch resistance rating | 2000 cycles | |
| Net product weight | 75 kg | |
| Surface heat resistance (short contact) | 120 °C | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop central section | Light wood-grain melamine laminate over E1 grade MDF core | |
|---|---|---|
| Tabletop end panels | Matte black melamine laminate over matching composite core | |
| Table edge banding | 2 mm thick black PVC edge trim with rounded profile | |
| Support legs | Powder-coated matte black steel tube with textured finish | |
| Leveling feet | Chrome-plated steel threaded stem with non-slip rubber pad | |
| Core panel density | 720 kg/m³ | |
| Surface coating (legs) | Epoxy polyester powder coat, 60 micron thickness | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Leveling adjustment | Threaded steel feet adjust 15 mm vertically to stabilize on uneven floors | |
|---|---|---|
| Seating access | Open understructure without modesty panels allows seating on all four sides | |
| Surface function | Smooth non-porous laminate surface supports writing, laptop use and document layout | |
| Leg stability design | Splayed leg geometry distributes load outward to reduce wobble during meetings | |
| Floor protection | Rubber pads on leveling feet prevent hard floor scratching and skidding | |
| Assembly configuration | Knock-down leg attachment to pre-finished tabletop for on-site assembly | |
| Cable management compatibility | Pre-drilled leg mounts support optional under-table cable clips | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Small corporate meeting rooms | Fits 6 attendees for team meetings and project reviews | |
|---|---|---|
| Open office collaborative zones | Low-profile open design supports informal group work and huddles | |
| Training and seminar spaces | Durable scratch-resistant surface withstands frequent daily use | |
| Small startup workspaces | Modern two-tone finish matches contemporary open-plan office aesthetics | |
| Home office multi-use spaces | Standard 750mm height pairs with standard office task chairs |
EU Market Access Requirements* EN Standards
| Office furniture strength and stability | EN 15372:2016 level 2 for contract office use | |
|---|---|---|
| Laminate surface wear resistance | EN 438:2016 abrasion resistance ≥350 revolutions |
US and Canada office-furniture standards
| Conference table static load test | ANSI/BIFMA X2021desk/table vertical load test 136 kg per 760mm | |
|---|---|---|
| Table leg stability test | ANSI/BIFMA X2021horizontal stability 156 N force at table edge |
Standards applicable to China-market projects
| Tabletop formaldehyde emission | GB/T 17657E1 limit ≤0.124 mg/m³ | |
|---|---|---|
| Furniture stability | GB/T 10357.1vertical and horizontal load stability test | |
| Surface coating adhesion | GB/T 4893.4cross-cut adhesion grade 1 minimum |
This product must meet the following technical requirements: 1. Tabletop formaldehyde emission: GB/T 17657E1 limit ≤0.124 mg/m³; 2. Furniture stability: GB/T 10357.1vertical and horizontal load stability test; 3. Surface coating adhesion: GB/T 4893.4cross-cut adhesion grade 1 minimum; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
