纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	600 × 600 × 750 mm
Tabletop thickness with edge trim	25 mm
Square floor base dimensions	450 x 450 mm
Central support column diameter	76 mm
Upper matte black column section height	490 mm
Lower gold column section height	130 mm
Minimum knee clearance height under tabletop	710 mm
Tabletop corner bevel radius	30 mm
Floor base plate thickness	8 mm
Gold edge trim width	15 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Table net weight	25 kg
Distributed static tabletop load capacity	136 kg
Recommended seating capacity	3 people
Sintered stone surface abrasion resistance	6000 cycles
Base anti-slip pad static friction coefficient	0.6
Maximum uneven floor tolerance for stable placement	5 mm
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop surface layer	12 mm thick sintered stone, white marble-look polished finish
Tabletop edge trim	0.8 mm thick polished gold-plated stainless steel
Upper support column section	1.5 mm thick matte black powder-coated steel tube
Lower support column section	1.2 mm thick polished gold-plated stainless steel sleeve
Floor base plate	8 mm thick brushed gold stainless steel flat plate
Undertable support bracket	2 mm thick powder-coated steel cross bracket
Base bottom pads	5 mm thick non-slip rubber floor protectors
Assembly hardware	M8 zinc-plated steel connecting bolts and washers
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Knock-down assembly structure	Tabletop, column and base ship disassembled for reduced shipping volume
Four-direction knee clearance	Open space around central column supports seating from all four sides
Stain-resistant tabletop surface	Non-porous sintered stone surface resists liquid spills and food stains
Heat-resistant tabletop	Sintered stone surface withstands hot tableware up to 180°C without damage
Floor protection design	Rubber pads under base prevent scratching hard flooring during use
Fixed height design	750 mm standard dining height compatible with standard dining chairs
Easy surface maintenance	Smooth metal and stone surfaces wipe clean with standard commercial cleaning agents
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Commercial cafe seating areas	Compact footprint fits tight spacing for coffee shop and bistro dine-in service
Small apartment dining nooks	600mm square size saves floor space in compact residential dining areas
Boutique hotel lobby lounge areas	Two-tone black and gold finish matches modern light luxury interior design schemes
Milk tea and dessert shop seating	Stain-resistant easy-clean surface supports high-turnover food service use
Co-working office breakout areas	Compact size supports casual meeting and break space for small teams

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015 Furniture - Strength, durability and safety for domestic dining tables	Sets minimum strength and stability requirements for dining table use
EN 1022:2018 Domestic furniture - Seating - Determination of stability	Reference for associated seating stability when used with this table

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.5-2021 Desk/Table Products Test	Defines commercial-grade table load and durability test methods
ANSI/BIFMA X7.1-2020 Furniture Sustainability Standard	Provides framework for low-emission material selection for commercial projects

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017 General technical requirements for wooden furniture	Applies to structural safety and dimension tolerance of the table substrate
GB/T 4893.4-2013 Furniture surface adhesion test	Applicable for verifying coating adhesion on metal components

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017 General technical requirements for wooden furniture：Applies to structural safety and dimension tolerance of the table substrate；
2. GB/T 4893.4-2013 Furniture surface adhesion test：Applicable for verifying coating adhesion on metal components；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · SQ-BISTRO-600-BG-SLATE

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · SQ-BISTRO-600-BG-SLATE

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · SQ-BISTRO-600-BG-SLATE打开导出工具

页面快速操作

发布采购询价

产品描述

This contemporary square bistro dining table features a sleek light luxury aesthetic anchored by a single pedestal structure, ideal for spaces prioritizing refined, space-efficient design. Its 600 mm wide square tabletop is finished in polished white marble-look sintered stone, with soft beveled corners trimmed in polished gold-plated stainless steel for a polished, tactile edge. The central pedestal combines a tall matte black upper column with a shorter polished gold lower section, paired with a brushed gold square floor base to create a striking two-tone black and gold visual profile that balances modern minimalism with subtle opulence. The open central layout delivers unobstructed four-direction knee clearance of 710 mm under the tabletop, eliminating obstructive legs to support flexible seating access from all sides. Constructed for durable daily use, the table’s 12 mm sintered stone surface sits atop a powder-coated steel cross support bracket, with total tabletop thickness measuring 25 mm at the trimmed edge. Metal components use thickness-optimized steel and stainless steel for each section: 1.5 mm thick matte powder-coated steel for the upper support column, 1.2 mm thick polished gold-plated stainless steel for the lower column sleeve, and an 8 mm thick brushed gold stainless steel base plate. The table uses M8 zinc-plated steel bolts and washers for assembly, with 5 mm thick non-slip rubber pads fitted to the base bottom to prevent floor scratches. Weighing 25 kg net, the table supports a 136 kg distributed static load on its tabletop, with a sintered stone surface rated for 6000 cycles of abrasion resistance and able to withstand hot tableware up to 180°C without damage. Its non-porous surface resists liquid spills and food stains, wiping clean easily with standard commercial cleaning agents for low-effort upkeep. The 750 mm fixed standard dining height pairs seamlessly with standard dining chairs, and the base maintains stable placement on floors with up to 5 mm of unevenness. The table uses a knock-down assembly structure, shipped in two cartons per set to reduce shipping volume, with a reference assembly time of 40 minutes per unit. Its compact footprint suits a wide range of settings, including commercial cafe dine-in areas, small apartment dining nooks, boutique hotel lobby lounges, high-turnover milk tea and dessert shops, and co-working office breakout spaces, as its two-tone finish aligns with modern light luxury interior schemes. For procurement, note that shipments are delivered as two separate cartons per set with a packaged gross weight of 90 kg and total packaging volume of 0.55 m³, and the table is recommended to seat 3 people to maintain comfortable elbow room during use.

Contemporary Square Bistro Dining Table with Marble-Look Top and Black-Gold Pedestal Base Specifications

供应商与现货