纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1200 × 1200 × 760 mm
Tabletop thickness	25 mm
Leg cross-section (top)	40 x 40 mm
Leg cross-section (floor end)	25 x 25 mm
Under-table knee clearance height	700 mm
Stretcher cross-section	30 x 40 mm
Foot cap diameter	20 mm
Leg splay offset (from center)	480 mm
Clearance between opposite legs at floor	960 mm
Edge profile radius	3 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total net weight	23 kg
Distributed static tabletop load	100 kg
Single leg joint pull-out resistance	450 N
Seating capacity	4 people
Surface scratch resistance	Class 2 (2000 cycles)
Warranty period	2 years
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop substrate	18mm particleboard core
Tabletop surface finish	White melamine foil with acrylic paint topcoat
Tabletop edging	1mm PVC plastic edging
Leg construction	Solid Malaysian oak hardwood with clear natural finish
Cross stretcher material	Solid oak hardwood, mortise-and-tenon joined to legs
Fastener hardware	M6 zinc-plated steel screws with PA66+GF threaded inserts
Foot caps	Injection-molded black TPE plastic
Assembly hardware finish	Matte clear zinc coating
Wood moisture content	10%
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Knockdown assembly	Legs and stretcher attach to tabletop with included hex key, 30 minutes assembly time
Floor protection	Non-slip TPE foot caps prevent hard floor scratching and reduce sliding
Structural bracing	X-shaped cross stretcher connects all four legs to reduce wobble and increase frame rigidity
Surface maintenance	Smooth non-porous top wipes clean with mild detergent, resists common food and beverage spills
Seating access	360-degree perimeter access allows chair placement at any position around the round top
Load distribution	Four outward-splayed legs evenly distribute weight to prevent tipping under eccentric loads
Fastener retention	Threaded wood inserts prevent screw stripping during assembly and periodic re-tightening
Leg leveling adjustment	Fixed foot caps with 2mm tolerance for minor floor unevenness
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential dining nook	Fits compact apartment dining areas for 4-person daily meals, minimal footprint
Kitchen breakfast area	Works adjacent to kitchen counters for casual family meals, easy to clean white surface
Small cafe seating	Suitable for boutique coffee shop or bistro table settings, modern aesthetic matches casual dining spaces
Home office meeting table	Functions as a small casual meeting table for 4 people in home workspaces, neutral finish coordinates with office decor
Balcony leisure dining	Fits covered outdoor balconies for casual tea and light meals, solid wood legs withstand mild indoor/covered conditions

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Furniture – Strength, durability and safety for domestic dining tables, applicable for structural performance
EN 13722:2004	Furniture – Test methods for surface resistance to dry heat, applicable for tabletop finish
EN 71-3:2019+A1:2021	Migration of certain elements, applicable for surface coating safety

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for dimensional tolerance and structural safety
GB/T 4893.3-2020	Surface abrasion resistance test for furniture surfaces, applicable for tabletop finish durability
GB/T 4893.9-2013	Surface impact resistance test for furniture, applicable for tabletop impact performance
GB 18584-2001	Limit of harmful substances in wooden furniture, applicable for formaldehyde emission control
Tabletop center deflection under 50kg load	1.5 mm

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable for dimensional tolerance and structural safety；
2. GB/T 4893.3-2020：Surface abrasion resistance test for furniture surfaces, applicable for tabletop finish durability；
3. GB/T 4893.9-2013：Surface impact resistance test for furniture, applicable for tabletop impact performance；
4. GB 18584-2001：Limit of harmful substances in wooden furniture, applicable for formaldehyde emission control；
5. Tabletop center deflection under 50kg load：1.5 mm；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · RD-WT120-OAK-X

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · RD-WT120-OAK-X

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · RD-WT120-OAK-X打开导出工具

页面快速操作

发布采购询价

产品描述

The Modern Minimalist Round Dining Table with White Top and Oak-Tone Splayed Legs, model RD-WT120-OAK-X, is an unbranded fixed-top round dining table designed to balance understated visual appeal, structural reliability, and everyday practicality. Its form features a smooth circular white tabletop supported by four outward-splayed solid oak-tone hardwood legs, anchored by an X-shaped wooden cross stretcher that sits between the legs to create a clean, open silhouette. The legs taper gently from a wider cross-section at the tabletop connection to a narrower profile at the floor, finished with unobtrusive black foot caps that complement the warm oak tone and bright white top without disrupting the minimalist aesthetic.
The table’s construction prioritizes durable, fit-for-purpose materials: the 25mm thick tabletop uses an 18mm particleboard core, finished with a white melamine foil topped with acrylic paint and edged with 1mm PVC to seal the substrate. Legs are crafted from solid Malaysian oak hardwood with a clear natural finish, joined to the matching solid oak cross stretcher via traditional mortise-and-tenon joints. M6 zinc-plated steel screws pair with PA66+GF threaded inserts to prevent fastener stripping during assembly and regular re-tightening, while injection-molded black TPE foot caps sit at the base of each leg. The wood components are conditioned to a 10% moisture content for consistent long-term performance.
Designed for flexible use, the table supports four people with 360-degree perimeter access that allows chair placement at any position around the top, and offers 700mm of under-table knee clearance. The splayed leg configuration evenly distributes weight to reduce tipping risk under eccentric loads, while the X-shaped stretcher minimizes wobble and boosts overall frame rigidity. The non-porous tabletop resists common food and beverage spills and wipes clean easily with mild detergent, holding a Class 2 scratch resistance rating for 2000 cycles of surface contact. The non-slip TPE foot caps prevent hard floor scratching and reduce unwanted table movement. The unit ships knockdown, requiring assembly with the included hex key, and is covered by a 2-year warranty.
This table suits a range of residential and light commercial spaces: compact apartment dining nooks and kitchen breakfast areas for daily family meals, covered balcony leisure zones for light refreshments, home office workspaces for small four-person casual meetings, and boutique cafes or bistros seeking a modern, coordinated casual dining aesthetic. Procurement teams should note the unit ships across two cartons per set, plan for appropriate in-transit and on-site storage space, and account for required assembly time when scheduling installation for multi-unit projects.

Modern Minimalist Round Dining Table with White Top and Oak-Tone Splayed Legs Specifications

供应商与现货