| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1200 mm diameter x 760 mm height | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Leg cross-section (top) | 40 x 40 mm | |
| Leg cross-section (floor end) | 25 x 25 mm | |
| Under-table knee clearance height | 700 mm | |
| Stretcher cross-section | 30 x 40 mm | |
| Foot cap diameter | 20 mm | |
| Leg splay offset (from center) | 480 mm | |
| Clearance between opposite legs at floor | 960 mm | |
| Edge profile radius | 3 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total net weight | 23 kg | |
|---|---|---|
| Distributed static tabletop load | 100 kg | |
| Single leg joint pull-out resistance | 450 N | |
| Seating capacity | 4 people | |
| Surface scratch resistance | Class 2 (2000 cycles) | |
| Warranty period | 2 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | 18mm particleboard core | |
|---|---|---|
| Tabletop surface finish | White melamine foil with acrylic paint topcoat | |
| Tabletop edging | 1mm PVC plastic edging | |
| Leg construction | Solid Malaysian oak hardwood with clear natural finish | |
| Cross stretcher material | Solid oak hardwood, mortise-and-tenon joined to legs | |
| Fastener hardware | M6 zinc-plated steel screws with PA66+GF threaded inserts | |
| Foot caps | Injection-molded black TPE plastic | |
| Assembly hardware finish | Matte clear zinc coating | |
| Wood moisture content | 10% | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Knockdown assembly | Legs and stretcher attach to tabletop with included hex key, 30 minutes assembly time | |
|---|---|---|
| Floor protection | Non-slip TPE foot caps prevent hard floor scratching and reduce sliding | |
| Structural bracing | X-shaped cross stretcher connects all four legs to reduce wobble and increase frame rigidity | |
| Surface maintenance | Smooth non-porous top wipes clean with mild detergent, resists common food and beverage spills | |
| Seating access | 360-degree perimeter access allows chair placement at any position around the round top | |
| Load distribution | Four outward-splayed legs evenly distribute weight to prevent tipping under eccentric loads | |
| Fastener retention | Threaded wood inserts prevent screw stripping during assembly and periodic re-tightening | |
| Leg leveling adjustment | Fixed foot caps with 2mm tolerance for minor floor unevenness | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining nook | Fits compact apartment dining areas for 4-person daily meals, minimal footprint | |
|---|---|---|
| Kitchen breakfast area | Works adjacent to kitchen counters for casual family meals, easy to clean white surface | |
| Small cafe seating | Suitable for boutique coffee shop or bistro table settings, modern aesthetic matches casual dining spaces | |
| Home office meeting table | Functions as a small casual meeting table for 4 people in home workspaces, neutral finish coordinates with office decor | |
| Balcony leisure dining | Fits covered outdoor balconies for casual tea and light meals, solid wood legs withstand mild indoor/covered conditions |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic dining tables, applicable for structural performance | |
|---|---|---|
| EN 13722:2004 | Furniture – Test methods for surface resistance to dry heat, applicable for tabletop finish | |
| EN 71-3:2019+A1:2021 | Migration of certain elements, applicable for surface coating safety |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional tolerance and structural safety | |
|---|---|---|
| GB/T 4893.3-2020 | Surface abrasion resistance test for furniture surfaces, applicable for tabletop finish durability | |
| GB/T 4893.9-2013 | Surface impact resistance test for furniture, applicable for tabletop impact performance | |
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable for formaldehyde emission control | |
| Tabletop center deflection under 50kg load | 1.5 mm |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional tolerance and structural safety; 2. GB/T 4893.3-2020: Surface abrasion resistance test for furniture surfaces, applicable for tabletop finish durability; 3. GB/T 4893.9-2013: Surface impact resistance test for furniture, applicable for tabletop impact performance; 4. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable for formaldehyde emission control; 5. Tabletop center deflection under 50kg load: 1.5 mm; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
