| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
No parameter correction records exist. If you spot inaccurate data, click the flag icon at the end of the corresponding row to submit feedback. | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| Overall dimensions | 1000 x 1000 x 750 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Leg cross-section at floor | 40 mm square | |
| Undertable knee clearance height | 690 mm | |
| Clear leg span at floor level | 900 mm | |
| Cross brace height from floor | 420 mm | |
| Tabletop overhang past leg connection | 110 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
| Net product weight | 25 kg | |
|---|---|---|
| Tabletop uniform static load capacity | 100 kg | |
| Recommended seating capacity | 4 people | |
| Leg assembly static stability load | 80 kg lateral force | |
| Surface abrasion resistance | 400 revolutions | |
| Wood substrate moisture content | 12% | |
| Vertical impact resistance for tabletop | 120 mm drop | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| Tabletop substrate | Solid ash wood veneer over MDF core | |
|---|---|---|
| Tabletop edge finish | Matte clear UV lacquer | |
| Support legs | Solid natural ash wood | |
| Cross support bracing | Solid ash wood | |
| Joint hardware | Zinc-plated steel confirmat screws | |
| Foot pads | Non-marking PE plastic | |
| Surface coating | Low-VOC water-based wood sealer | |
| Edge banding | 0.6mm thick solid ash veneer edge band | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| Structural bracing system | Four-point cross brace connects all legs at mid-height, eliminates wobble during regular dining use | |
|---|---|---|
| Assembly configuration | Knock-down flat pack design, legs and brace attach to tabletop with included hardware, no on-site cutting or drilling required | |
| Floor protection function | Each leg is fitted with a replaceable glide pad to prevent scratching hard flooring and allow minor level adjustment | |
| Seating access | Circular tabletop has no sharp corners, allows flexible chair positioning around the full perimeter with no fixed leg positions blocking seating | |
| Surface usage suitability | Smooth sealed tabletop supports placement of dinnerware, glassware, and small decor items, resists minor water spills with immediate wiping | |
| Heat resistance | Finished tabletop withstands contact with 85°C hot serving dishes for 10 minutes without discoloration or finish damage | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| Number of shipping cartons | 1 carton | |
|---|---|---|
| Shipping carton dimensions | 1060 x 1060 x 140 mm | |
| Gross shipping weight | 29 kg | |
| Shipping volume per unit | 0.158 CBM | |
| assembly time | 30 minutes | |
| 20ft GP container loading quantity | 170 units | |
| 40ft HQ container loading quantity | 420 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm |
推荐空间 / 目标用户 / 使用方式
| Residential dining area | Fits small apartments, compact dining nooks or open-plan kitchen spaces for 4-person family meals | |
|---|---|---|
| Casual meeting space | Suitable for small office break rooms, co-working lounges or cafe seating areas for informal discussions | |
| Balcony or sunroom use | Lightweight wood construction works for covered outdoor casual dining or tea service, for indoor or fully sheltered spaces only | |
| Recommended pairing | Matches with solid wood or upholstered dining chairs with 450 mm seat height for ergonomic dining posture | |
| Studio apartment multi-use space | Functions as a compact work or craft table outside of meal times, supporting laptop use and small project work |
欧洲市场准入与化学品要求
| EN 12521:2015 Furniture - Strength, durability and safety - Requirements for domestic tables | Applicable as acceptance reference for structural strength, stability and safety for residential dining use | |
|---|---|---|
| EN 13722:2004 Furniture - Test methods for the assessment of surface resistance to dry heat | Applicable as acceptance test for tabletop resistance to hot serving dishes | |
| EN 71-3:2019+A1:2021 Safety of toys - Part 3: Migration of certain elements | Applicable as reference for surface coating heavy metal limits for furniture used in homes with young children |
美国及加拿大办公家具标准
适用于中国市场项目的标准
| GB/T 3324-2017 General technical requirements for wooden furniture | Applicable as acceptance standard for dimensional tolerance, structural stability, and surface finish quality | |
|---|---|---|
| GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | Applicable as acceptance standard for formaldehyde and heavy metal emission limits | |
| GB/T 4893.8-2013 Test of surface coatings for furniture - Part 8: Determination of abrasion resistance | Applicable as acceptance test for tabletop surface durability | |
| GB/T 4893.2-2020 Test of surface coatings for furniture - Part 2: Determination of resistance to wet heat | Applicable as acceptance test for tabletop resistance to hot wet serving items |
本产品须满足以下技术参数要求： 1. GB/T 3324-2017 General technical requirements for wooden furniture：Applicable as acceptance standard for dimensional tolerance, structural stability, and surface finish quality； 2. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture：Applicable as acceptance standard for formaldehyde and heavy metal emission limits； 3. GB/T 4893.8-2013 Test of surface coatings for furniture - Part 8: Determination of abrasion resistance：Applicable as acceptance test for tabletop surface durability； 4. GB/T 4893.2-2020 Test of surface coatings for furniture - Part 2: Determination of resistance to wet heat：Applicable as acceptance test for tabletop resistance to hot wet serving items； 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告，可选择公制或英制单位。
导出全部商品信息与参数模块，文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具This unbranded Round Solid Wood Dining Table (model RDT-WD-1000-N) features a clean, approachable circular form defined by a continuous smooth tabletop with rounded edges, supported by four evenly spaced tapered solid wood legs. A matching wood cross-brace sits beneath the tabletop, positioned to avoid contact with seated users’ knees while creating a stable, open understructure that leaves clear, unobstructed perimeter access for seating, with no sharp corners to restrict flexible chair placement. The tabletop carries a light natural wood finish, paired with a matte clear UV lacquer and low-VOC water-based sealer that highlights visible strght wood grain, edged with matching solid ash veneer banding with no visible seams. Tapered solid ash legs connect to the cross brace via concealed zinc-plated steel confirmat screws, with non-marking PE glide pads fitted to each foot to protect hard flooring and allow minor level adjustment. The knock-down flat pack design ships all components in a single carton, with assembly completed in 30 minutes using a standard cross-head screwdriver, requiring no on-site cutting or drilling. The smooth sealed surface supports regular dining use, resisting minor water spills with immediate wiping, withstanding short-term contact with hot serving dishes, and holding standard loads of tableware, serving pieces and small decor; the cross-braced structure eliminates wobble during regular use and meets residential anti-tip requirements, with controlled wood moisture content to prevent warping in indoor settings. Sized to seat four people comfortably, the table fits small residential dining nooks, compact apartment kitchens, open-plan living spaces, and studio apartments where it can double as a compact work or craft surface outside meal times. It also works well for casual commercial settings including small office break rooms, co-working lounges, and cafe seating areas, and is suitable for fully sheltered balcony or sunroom spaces on even hard floors. For procurement, note that core substrate details and foot pad specifications require supplier bill of materials confirmation, formaldehyde emission performance requires supporting test documentation, and all listed dimensional and logistics values are derived from standard product proportions and industry standard s rather than direct supplier measurement. The single-carton flat pack design supports efficient bulk shipping for both residential and small commercial furnishing projects.
关注我们