Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1000 × 1000 × 750 mm
Tabletop thickness	25 mm
Leg cross-section at floor	40 mm square
Undertable knee clearance height	690 mm
Clear leg span at floor level	900 mm
Cross brace height from floor	420 mm
Tabletop overhang past leg connection	110 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Net product weight	25 kg
Tabletop uniform static load capacity	100 kg
Recommended seating capacity	4 people
Leg assembly static stability load	80 kg lateral force
Surface abrasion resistance	400 revolutions
Wood substrate moisture content	12%
Vertical impact resistance for tabletop	120 mm drop
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Tabletop substrate	Solid ash wood veneer over MDF core
Tabletop edge finish	Matte clear UV lacquer
Support legs	Solid natural ash wood
Cross support bracing	Solid ash wood
Joint hardware	Zinc-plated steel confirmat screws
Foot pads	Non-marking PE plastic
Surface coating	Low-VOC water-based wood sealer
Edge banding	0.6mm thick solid ash veneer edge band
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Structural bracing system	Four-point cross brace connects all legs at mid-height, eliminates wobble during regular dining use
Assembly configuration	Knock-down flat pack design, legs and brace attach to tabletop with included hardware, no on-site cutting or drilling required
Floor protection function	Each leg is fitted with a replaceable glide pad to prevent scratching hard flooring and allow minor level adjustment
Seating access	Circular tabletop has no sharp corners, allows flexible chair positioning around the full perimeter with no fixed leg positions blocking seating
Surface usage suitability	Smooth sealed tabletop supports placement of dinnerware, glassware, and small decor items, resists minor water spills with immediate wiping
Heat resistance	Finished tabletop withstands contact with 85°C hot serving dishes for 10 minutes without discoloration or finish damage
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Number of shipping cartons	1 carton
Shipping carton dimensions	1060 x 1060 x 140 mm
Gross shipping weight	29 kg
Shipping volume per unit	0.158 CBM
assembly time	30 minutes
20ft GP container loading quantity	170 units
40ft HQ container loading quantity	420 units
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential dining area	Fits small apartments, compact dining nooks or open-plan kitchen spaces for 4-person family meals
Casual meeting space	Suitable for small office break rooms, co-working lounges or cafe seating areas for informal discussions
Balcony or sunroom use	Lightweight wood construction works for covered outdoor casual dining or tea service, for indoor or fully sheltered spaces only
Recommended pairing	Matches with solid wood or upholstered dining chairs with 450 mm seat height for ergonomic dining posture
Studio apartment multi-use space	Functions as a compact work or craft table outside of meal times, supporting laptop use and small project work

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521:2015 Furniture - Strength, durability and safety - Requirements for domestic tables	Applicable as acceptance reference for structural strength, stability and safety for residential dining use
EN 13722:2004 Furniture - Test methods for the assessment of surface resistance to dry heat	Applicable as acceptance test for tabletop resistance to hot serving dishes
EN 71-3:2019+A1:2021 Safety of toys - Part 3: Migration of certain elements	Applicable as reference for surface coating heavy metal limits for furniture used in homes with young children

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017 General technical requirements for wooden furniture	Applicable as acceptance standard for dimensional tolerance, structural stability, and surface finish quality
GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture	Applicable as acceptance standard for formaldehyde and heavy metal emission limits
GB/T 4893.8-2013 Test of surface coatings for furniture - Part 8: Determination of abrasion resistance	Applicable as acceptance test for tabletop surface durability
GB/T 4893.2-2020 Test of surface coatings for furniture - Part 2: Determination of resistance to wet heat	Applicable as acceptance test for tabletop resistance to hot wet serving items

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017 General technical requirements for wooden furniture: Applicable as acceptance standard for dimensional tolerance, structural stability, and surface finish quality;
2. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture: Applicable as acceptance standard for formaldehyde and heavy metal emission limits;
3. GB/T 4893.8-2013 Test of surface coatings for furniture - Part 8: Determination of abrasion resistance: Applicable as acceptance test for tabletop surface durability;
4. GB/T 4893.2-2020 Test of surface coatings for furniture - Part 2: Determination of resistance to wet heat: Applicable as acceptance test for tabletop resistance to hot wet serving items;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · RDT-WD-1000-N

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · RDT-WD-1000-N

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · RDT-WD-1000-NOpen Export Tool

Quick Actions

Post an RFQ

Product Description

This unbranded Round Solid Wood Dining Table (model RDT-WD-1000-N) features a clean, approachable circular form defined by a continuous smooth tabletop with rounded edges, supported by four evenly spaced tapered solid wood legs. A matching wood cross-brace sits beneath the tabletop, positioned to avoid contact with seated users’ knees while creating a stable, open understructure that leaves clear, unobstructed perimeter access for seating, with no sharp corners to restrict flexible chair placement. The tabletop carries a light natural wood finish, paired with a matte clear UV lacquer and low-VOC water-based sealer that highlights visible strght wood grain, edged with matching solid ash veneer banding with no visible seams. Tapered solid ash legs connect to the cross brace via concealed zinc-plated steel confirmat screws, with non-marking PE glide pads fitted to each foot to protect hard flooring and allow minor level adjustment. The knock-down flat pack design ships all components in a single carton, with assembly completed in 30 minutes using a standard cross-head screwdriver, requiring no on-site cutting or drilling. The smooth sealed surface supports regular dining use, resisting minor water spills with immediate wiping, withstanding short-term contact with hot serving dishes, and holding standard loads of tableware, serving pieces and small decor; the cross-braced structure eliminates wobble during regular use and meets residential anti-tip requirements, with controlled wood moisture content to prevent warping in indoor settings. Sized to seat four people comfortably, the table fits small residential dining nooks, compact apartment kitchens, open-plan living spaces, and studio apartments where it can double as a compact work or craft surface outside meal times. It also works well for casual commercial settings including small office break rooms, co-working lounges, and cafe seating areas, and is suitable for fully sheltered balcony or sunroom spaces on even hard floors. For procurement, note that core substrate details and foot pad specifications require supplier bill of materials confirmation, formaldehyde emission performance requires supporting test documentation, and all listed dimensional and logistics values are derived from standard product proportions and industry standard s rather than direct supplier measurement. The single-carton flat pack design supports efficient bulk shipping for both residential and small commercial furnishing projects.

Round Solid Wood Dining Table Specifications

Suppliers and stock