基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源:工厂资料结构化字段,最终以实测值为准
| 产品外部尺寸(宽 × 深 × 高) | 3600 × 750 × 1100 mm | |
|---|---|---|
| Staff work surface height from floor | 750 mm | |
| Visitor-facing counter overhang depth | 330 mm | |
| Per-staff knee well clear width | 800 mm | |
| Knee well clear height under work surface | 650 mm | |
| Toe kick clearance depth at base | 450 mm | |
| Main carcass/front panel thickness | 18 mm | |
| Worktop thickness | 25 mm | |
| PVC edge banding thickness | 2 mm | |
| Kickplate height from floor | 100 mm | |
| Cable grommet inner diameter | 80 mm | |
| Internal cable tray usable width | 150 mm | |
| Finished Top Thickness | 50 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源:产品性能数据,采购前请核对具体测试口径
| Overall worktop static uniform load capacity | 260 kg | |
|---|---|---|
| Recommended maximum concurrent users | 3 | |
| Surface finish abrasion resistance | 2000 cycles | |
| Product net weight (fully assembled) | 280 kg | |
| Front panel impact resistance | 1.5 J | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源:以工厂材质清单与验货报告为准
| Front facade panel | 18mm E1 grade high-density fiberboard, matte white baked paint finish | |
|---|---|---|
| Work surface | 25mm E1 grade particleboard, matte white laminate, 2mm PVC sealed edges | |
| Base kickplate | 1.2mm thick brushed gray stainless steel | |
| Internal structural frame | 1.5mm thick rectangular steel tubing, powder coated black | |
| Internal cabinet drawer slides | Cold-rolled steel three-section silent slides, zinc plated | |
| Access panel hinges | Stainless steel soft-close concealed hinges | |
| Cable grommets | ABS plastic, brushed silver finish, with brush seal | |
| Internal cable tray | 0.8mm thick galvanized steel, perforated design | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源:功能配置参数,以供应商正式规格为准
| Cable management system | 3 grommets + full-length under-tray routes power/data to all work positions | |
|---|---|---|
| Staff under-counter storage | Integrated mobile pedestal with 3 drawers per workstation, lockable option | |
| Modular panel assembly | Bolt-connected segmented panels form continuous curved facade, on-site reconfigurable | |
| Accessible transaction surface | Raised visitor counter at 1100mm height supports standing guest interaction | |
| Anti-tip floor anchoring | Pre-drilled base plates secure unit to lobby floor to prevent forward tipping | |
| Rounded edge protection | All public-facing counter edges are radius-rounded to eliminate sharp impact points | |
| Toe kick recess | 100mm high recess at base allows seated staff to rest feet close to unit | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源:外贸报价与装柜测算参考
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | Main top 2500× 1050× 350 mm; return/pedestal packed separately | |
| Reference Packaged Gross Weight | 180 kg/set in 4 cartons | |
| Reference Packaging Volume | 1 m³/set |
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源:依据产品结构与品类整理的推荐应用场景
| Corporate office lobbies | Multi-station layout supports 3 reception staff greeting visitors and processing check-ins | |
|---|---|---|
| Government service centers | Curved public-facing facade provides open, approachable transaction points for citizens | |
| Hospital outpatient reception areas | Smooth sealed surfaces support easy disinfection for high-traffic public health settings | |
| University administration lobbies | Wide transaction counter handles student inquiries and document drop-off efficiently | |
| Hotel welcome lobbies | Curved design creates a central focal point for guest check-in and concierge services | |
| Bank branch entry areas | Raised transaction surface supports secure document and item exchange with customers |
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
| EN 527-1:2011 | Office work tables: safety and strength requirements for work surfaces | |
|---|---|---|
| EN 15372:2016 | Furniture: strength, durability and safety for non-domestic storage | |
| EN 1728:2014 | Furniture: seating and table test methods for strength and stability | |
| EN 13986:2004 | Wood-based panels for construction: formaldehyde emission limits |
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to wood panel components | |
|---|---|---|
| GB/T 4897.3-2015 | Requirements for particleboard used in furniture, applicable to worktop substrates | |
| GB 18580-2017 | Formaldehyde emission limit for wood-based panels, minimum E1 grade required | |
| GB/T 14531-2017 | Ergonomic requirements for office work surfaces, applicable to work height |
本产品须满足以下技术参数要求: 1. GB/T 3324-2017:General technical requirements for wooden furniture, applicable to wood panel components; 2. GB/T 4897.3-2015:Requirements for particleboard used in furniture, applicable to worktop substrates; 3. GB 18580-2017:Formaldehyde emission limit for wood-based panels, minimum E1 grade required; 4. GB/T 14531-2017:Ergonomic requirements for office work surfaces, applicable to work height; 最终交付参数、检测报告和验收标准以双方采购合同为准。
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告,可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块,文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段,可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具