纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	670 × 680 × 1220 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	22 kg
Recommended user weight	150 kg
Static load verification target	500 kg
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam indentation hardness	55 N
Foam rebound	40%
Seat upholstery abrasion acceptance	50,000 Martindale cycles
Tilt mechanism cycles	100,000 cycles
Caster rolling durability	100,000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat cover	Tan full-grain or corrected-grain leather surface with matching edge upholstery
Alternative cover grade	1.2 mm top-grain leather or microfiber leather
Seat cushion	Molded high-resilience polyurethane foam, 80 mm thick
Back cushion	Molded polyurethane lumbar foam, 60 mm thick
Internal back shell	12 mm molded plywood or reinforced polypropylene load shell
Seat support plate	3 mm stamped steel seat plate with black anti-corrosion coating
Arm frames	Polished die-cast aluminum or chrome-plated steel tubular loop frames
Arm pads	Tan upholstered pads over 15 mm foam layer
Five-star base	Polished aluminum five-star base with 3 mm wall section
Gas lift	50 mm class-4 steel gas lift with chrome telescopic tube
Casters	Black nylon twin-wheel casters with steel bearings and 60 mm wheels
Stitching	Polyester core-spun thread with 8 stitches per 50 mm seam pitch

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

360-degree swivel	Full-rotation seat on central gas lift for desk-facing and side discussion positions
Seat height adjustment	70 mm vertical lift through a right-side pneumatic lever
Synchronized tilt	Seat and back move together through a 15-degree recline angle
Tilt lock	One upright lock position and one free-tilt mode controlled by the side lever
Tension adjustment	Manual rear knob adjusts recline resistance for users up to 150 kg
Fixed arm support	Rigid loop arms hold arm pads 230 mm above the seat without width or height adjustment
Lumbar contour	Integrated lower-back curve with a horizontal seam defining shoulder and lumbar zones
Mobility	Five 60 mm twin-wheel casters provide omnidirectional movement on hard floors or low-pile carpet
Replacement caster interface	Standard 11 mm grip-neck stem for field replacement
Quiet floor protection	Soft nylon wheel tread with 20 mm per-wheel width to reduce floor marking
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Packed gross weight	26 kg
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office	Use behind a management desk for daily computer work, meetings, and prolonged seated tasks
Conference room	Place around boardroom tables where swivel access and formal appearance are required
Private consulting room	Use for professional advisory or client meetings with a refined tan and chrome finish
Hotel business center	Deploy in guest workstations requiring durable upholstery and easy repositioning
Management workstation	Pair with a 760 mm high executive desk and 530 mm seat-height range
Project procurement configuration	Specify in batches of 10 or more with leather grade, caster type, and mechanism reports confirmed before order
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1 applicability	Use office-chair dimensional safety and structural test geometry for seat, back, arm, and base evaluation
EN 1335-2 applicability	Apply safety requirements including stability, shear points, and structural integrity
EN 1335-3 applicability	Apply static load, fatigue, and impact test methods to seat, back, arms, and casters
EN 1022 applicability	Use seating stability test requirements for forward, rearward, and lateral tipping checks

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 applicability	Apply office-chair safety, static load, fatigue, impact, and stability acceptance tests

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.3 applicability	Apply chair strength and durability test methods to back, seat, arms, and base load verification
GB/T 27924 industrial-use applicability	Use industrial-office-chair safety, stability, and durability requirements for commercial projects
GB 28007 applicability	Use children's furniture requirements only if the chair is supplied for a minor-occupancy space

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.3 applicability：Apply chair strength and durability test methods to back, seat, arms, and base load verification；
2. GB/T 27924 industrial-use applicability：Use industrial-office-chair safety, stability, and durability requirements for commercial projects；
3. GB 28007 applicability：Use children's furniture requirements only if the chair is supplied for a minor-occupancy space；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · HB-EXEC-TAN-CHR-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · HB-EXEC-TAN-CHR-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · HB-EXEC-TAN-CHR-01打开导出工具

页面快速操作

发布采购询价

产品描述

The High-Back Tan Leather Executive Swivel Chair is a formal executive office seating option with a tall, structured profile and a coordinated tan, black, and polished-metal appearance. Its high back uses a horizontal seam to distinguish the shoulder and lumbar zones, while the integrated lower-back curve provides defined support. Rigid loop arms frame the seat, and the five-star base with black twin-wheel casters gives the chair a balanced commercial look suited to professional interiors. Overall dimensions are 670 by 680 by 1220 millimeters, with 540 millimeters of clear width between the armrests. The finished seat cushion is 90 millimeters thick, the backrest padding is 70 millimeters thick, and the lumbar support zone is 240 millimeters high. Upholstery is tan leather or leather-look material. The seat cover may be specified as full-grain or corrected-grain leather with matching edge upholstery, with alternative 1.2 millimeter top-grain leather or microfiber leather grades. The seat uses molded high-resilience polyurethane foam, while the back uses molded polyurethane lumbar foam. Supporting construction includes a molded plywood or reinforced polypropylene internal back shell, a stamped steel seat plate with black anti-corrosion coating, a steel mechanism, gas lift, and polished aluminum or chrome-finished metal arm frames. Arm pads are tan upholstered over foam, and the five-star base is polished aluminum. The chair provides full 360-degree swivel movement, allowing easy turning between a desk and side discussion positions. A right-side pneumatic lever controls 70 millimeters of seat-height adjustment. The synchronized tilt moves the seat and back together through a 15-degree recline, with one upright lock position and one free-tilt mode. A rear manual knob adjusts recline resistance, and fixed arm pads remain 230 millimeters above the seat without width or height adjustment. It is suitable for executive offices, management workstations, boardrooms, private consulting rooms, and hotel business centers where formal presentation and mobility are required. For a management desk, the recommended pairing is a 760 millimeter high executive desk and a 530 millimeter seat-height range. The chair supports users up to 150 kilograms and has a net weight of 22 kilograms. Procurement teams ordering batches of 10 or more should confirm the leather grade, caster type, and mechanism reports before purchase. Delivery is configured as one set across two cartons, with a reference assembly time of 40 minutes per set.

High-Back Tan Leather Executive Swivel Chair Specifications

供应商与现货