纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	660 × 680 × 1020 mm
Seat height	450 mm
Seat width	510 mm
Seat depth	480 mm
Backrest total height	640 mm
Seat cushion thickness	80 mm
Armrest height above seat	200 mm
Sled base footprint width	580 mm
Sled base depth (front to rear floor contact)	620 mm
Backrest lumbar zone height	180 mm above seat
Finished Seat Cushion Thickness	90mm
Backrest Padding Thickness	70mm
Lumbar Support Zone Height	240mm
Clear Width Between Armrests	540mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Estimated net weight	17kg
Static seat load capacity	136 kg / 300 lbs
Recommended user weight limit	120 kg
Cantilever frame static load test reference	≥15000 cycles without structural deformation
Applicable user count	Single occupant
Estimated net product weight	17.5 kg
Recommended maximum occupant weight	120 kg
Cantilever frame durability reference	≥20000 dynamic flex cycles without permanent deformation
Upholstery seam strength	≥200 N per seam
Seat Foam Density / Rebound Reference	45kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat and back upholstery	Smooth light gray polyurethane (PU) faux leather
Seat cushion core	45kg/m³ high-density polyurethane foam
Backrest cushion core	35kg/m³ medium-density polyurethane foam
Cantilever support frame	22mm diameter chrome-plated steel tube, wall thickness 1.5mm
Armrest structure	Steel inner frame wrapped in matching light gray PU upholstery over foam padding
Floor contact glides	Injection molded non-marking nylon glides
Internal back support panel	12mm thick molded plywood
Upholstery seam stitch pitch	3 stitches per cm / 8 stitches per inch
Armrest assembly	12mm diameter curved steel inner support, wrapped in 20mm PU foam and matching light gray PU upholstery
Internal back support substrate	12mm thick molded beech plywood, shaped to match ergonomic back contour
Internal seat support substrate	15mm thick multi-layer plywood, bonded to seat foam core
Upholstery construction	Double-stitched seam with bonded nylon thread, 3 stitches per cm (8 stitches per inch) pitch

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating support	Fixed cantilever sled design, no swivel, height adjustment or tilt, provides gentle flex for dynamic seated comfort
Fixed arm support	Integrated curved upholstered armrests fixed permanently at 210mm above seat surface, aligned to standard 750mm desk height to support neutral forearm posture during meetings
Ergonomic back support	Contoured two-section backrest with horizontal seam defining a built-in lumbar curve at 220mm above seat, supporting upright seated posture during 2 hour meeting sessions
Floor protection	Non-marking glides on all base feet allow smooth repositioning on hard floors without scratching
Cantilever flex	Chrome steel frame provides ~10 degrees of controlled backward flex under seated load without mechanical tilting mechanism
Use case flexibility	Fixed design requires no user adjustment, ready for immediate use in meeting or guest seating
Seating support behavior	Fixed cantilever sled base design, no swivel, height adjustment, casters or tilt mechanism; steel frame provides 12 degrees of controlled backward flex under seated load to reduce static sitting pressure without mechanical adjustment
Floor protection and repositioning	Non-marking rubber-padded nylon glides on all four base contact points allow quiet repositioning on wood, tile, and vinyl hard floors without scratching or leaving marks; glides produce minimal noise when chairs are shifted under tables
Anti-tip stability	610mm front-to-back sled floor contact span prevents tipping during normal rearward leaning, eliminating need for rear anti-tip protrusions that catch on carpet or flooring gaps
No-assembly use preparation	Chairs are shipped nearly fully assembled, only requiring minor glide fitting or bolt tightening before deployment for immediate guest/meeting use
Recline Angle / Lock Reference	125° with 3 suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Number of packages	1 unit per carton
Reference carton dimensions	700 x 450 x 650 mm
Reference gross weight per carton	21kg
Reference CBM per unit	0.205 cbm
Indicative 40HQ container load quantity	350 units
Assembly time reference	10minutes per unit
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40minutes per set
Reference Packaged Gross Weight	23kg/set
Reference Carton Volume	0.26m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Conference/meeting room seating	Ideal for boardroom and meeting table arrangements, fixed non-rolling base prevents unwanted movement during discussions
Executive office guest seating	Suitable for placement in front of executive desks for visitor seating, polished chrome and light gray finish matches premium office decor
Reception/waiting area seating	Durable cantilever construction supports high-traffic waiting area use with minimal maintenance requirements
Training room seating	Low-profile fixed design allows easy tucking under tables when not in use to maximize floor space in training facilities
Recommended floor type	Suitable for hard floors (wood, tile, vinyl) with fitted non-marking glides; not recommended for thick pile carpet without alternative glides
Standard available upholstery colors	Offered in light gray (as pictured), plus standard black, dark gray and beige options for commercial projects
Conference/boardroom seating	Suitable for 12 person conference table arrangements, fixed non-rolling base prevents unwanted movement during discussions, low-profile sled base tucks fully under 750mm high conference tables to save space
Corporate reception/waiting areas	Appropriate for high-traffic reception zones, durable PU upholstery resists stains and allows easy wiping cleaning, robust cantilever frame withstands daily high-turnover use with minimal maintenance

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-2:2018	Applicable reference standard for office chair safety, strength and stability for non-adjustable office seating
EN 1022:2018	Applicable reference standard for seating stability testing for cantilever domestic and contract chairs
EN 14465:2003	Applicable reference for upholstery fabric/leather abrasion resistance, recommended minimum 50000 Martindale cycles for commercial use
Tip stability threshold (rearward)	≥60 kg applied 100mm from back top without tipping

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1-2017 (non-adjustable chair clauses)	Applicable reference standard for commercial office chair static and dynamic load testing for fixed guest/conference chairs

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3326-2016	Applicable standards and test results require confirmation
GB/T 22792.1-2009	Applicable reference standard for office chair structural strength testing for fixed-base seating
GB 18587-2001	Applicable reference for limit of harmful substances in upholstered furniture textiles/leather

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3326-2016：Applicable standards and test results require confirmation；
2. GB/T 22792.1-2009：Applicable reference standard for office chair structural strength testing for fixed-base seating；
3. GB 18587-2001：Applicable reference for limit of harmful substances in upholstered furniture textiles/leather；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CONF-CANT-LG-001

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CONF-CANT-LG-001

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CONF-CANT-LG-001打开导出工具

页面快速操作

发布采购询价

Light Gray Upholstered Cantilever Conference Chair Specifications

供应商与现货